+++ /dev/null
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-
-*** Variables ***
-# Translation table used to convert values received from Honeycomb to values
-# received from VAT.
-| &{protocols}=
-| ... | -=0
-| ... | ipv4=1
-| ... | ipv6=2
-| ... | ethernet=3
-| ... | nsh=4
-
-*** Keywords ***
-| Honeycomb creates VxLAN GPE interface
-| | [Documentation] | Uses Honeycomb API to configure a VxLAN tunnel.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface to be created. Type: string
-| | ... | - base_settings - configuration data common for all interfaces.\
-| | ... | Type: dictionary
-| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb creates VxLAN GPE interface \
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${base_params} \
-| | ... | \| ${vxlan_gpe_params} \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ... | ${base_settings} | ${vxlan_gpe_settings}
-| | ...
-| | Create VxLAN GPE interface
-| | ... | ${node} | ${interface} | &{base_settings} | &{vxlan_gpe_settings}
-
-| Honeycomb removes VxLAN GPE interface
-| | [Documentation] | Uses Honeycomb API to remove VxLAN GPE interface from\
-| | ... | node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of the interface to be removed. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes VxLAN GPE interface \
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ...
-| | Delete interface | ${node} | ${interface}
-
-| VxLAN GPE Operational Data From Honeycomb Should Be
-| | [Documentation] | Uses Honeycomb API to get operational data about the\
-| | ... | given interface and compares them to the values provided as arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface to be checked. Type: string
-| | ... | - base_settings - configuration data common for all interfaces.\
-| | ... | Type: dictionary
-| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| VxLAN GPE Operational Data From Honeycomb Should Be \
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${base_params} \
-| | ... | \| ${vxlan_gpe_params} \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ... | ${base_settings} | ${vxlan_gpe_settings}
-| | ...
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Should be equal as strings
-| | ... | ${api_data['name']} | ${base_settings['name']}
-| | Should be equal as strings
-| | ... | ${api_data['type']} | v3po:vxlan-gpe-tunnel
-| | Run keyword if | $base_settings['enabled'] == True
-| | ... | Run keywords
-| | ... | Should be equal as strings | ${api_data['admin-status']} | up
-| | ... | AND
-| | ... | Should be equal as strings | ${api_data['oper-status']} | up
-| | ... | ELSE
-| | ... | Run keywords
-| | ... | Should be equal as strings | ${api_data['admin-status']} | down
-| | ... | AND
-| | ... | Should be equal as strings | ${api_data['oper-status']} | down
-
-| VxLAN GPE Operational Data From VAT Should Be
-| | [Documentation] | Uses VAT to get operational data about the given\
-| | ... | interface and compares them to the values provided as arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface to be checked. Type: string
-| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| VxLAN GPE Operational Data From VAT Should Be \
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${vxlan_gpe_params} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${vxlan_gpe_params}
-| | ...
-| | ${if1}= | Vpp Get Interface Sw Index | ${node} | ${interface}
-| | ${vat_data}= | VxLAN GPE Dump | ${node} | ${if1}
-| | Should be equal as strings
-| | ... | ${vat_data['local']} | ${vxlan_gpe_params['local']}
-| | Should be equal as strings
-| | ... | ${vat_data['remote']} | ${vxlan_gpe_params['remote']}
-| | Should be equal as strings
-| | ... | ${vat_data['vni']} | ${vxlan_gpe_params['vni']}
-| | Should be equal as strings
-| | ... | ${vat_data['encap_vrf_id']} | ${vxlan_gpe_params['encap-vrf-id']}
-| | Should be equal as strings
-| | ... | ${vat_data['decap_vrf_id']} | ${vxlan_gpe_params['decap-vrf-id']}
-| | Should be equal as strings | ${vat_data['protocol']}
-| | ... | ${protocols['${vxlan_gpe_params['next-protocol']}']}
-
-| VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | [Documentation] | Uses VAT and Honeycomb to get operational data about the \
-| | ... | given VxLAN GPE interface and compares the interface indexes. The \
-| | ... | VxLAN GPE interface index from Honeycomb should be greater than \
-| | ... | index from VAT by one.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of the interface to be checked. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| VxLAN GPE Interface indices from Honeycomb and VAT should \
-| | ... | correspond \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ...
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${if1}= | Vpp Get Interface Sw Index | ${node} | ${interface}
-| | ${vat_data}= | VxLAN GPE Dump | ${node} | ${if1}
-| | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1
-| | Should be equal as strings
-| | ... | ${api_data['if-index']} | ${sw_if_index}
-
-| VxLAN GPE Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Uses Honeycomb API to get operational data about\
-| | ... | the given interface and expects to fail.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| VxLAN GPE Operational Data From Honeycomb Should Be empty\
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ...
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Should be empty | ${api_data}
-
-| VxLAN GPE Operational Data From VAT Should Be empty
-| | [Documentation] | Uses VAT to get operational data about the given\
-| | ... | interface and expects an empty dictionary.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| VxLAN GPE Operational Data From VAT Should Be empty\
-| | ... | \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | ${data}= | VxLAN Dump | ${node}
-| | Should be empty | ${data}
-
-| Honeycomb fails to create VxLAN GPE interface
-| | [Documentation] | Uses Honeycomb API to configure a VxLAN tunnel with wrong\
-| | ... | configuration data.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface to be created. Type: string
-| | ... | - base_settings - Configuration data common for all interfaces.\
-| | ... | Type: dictionary
-| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb fails to create VxLAN GPE interface \
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${wrong_base_params} \
-| | ... | \| ${vxlan_gpe_params} \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ... | ${base_settings} | ${vxlan_gpe_settings}
-| | ...
-| | Run keyword and expect error | *HoneycombError*not successful. * code: *00.
-| | ... | Create VxLAN GPE interface
-| | ... | ${node} | ${interface} | &{base_settings} | &{vxlan_gpe_settings}
Code Review / csit.git / blobdiff