FIX: Pylint reduce
[csit.git] / resources / libraries / robot / ip / ip4.robot
index 3b2724f..ef5b27f 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 | | ... | Type: string
 | | ... | - remote_host2_ip - IP address of remote host2 (Optional).
 | | ... | Type: string
+| | ... | - remote_host_mask - Mask of remote host IP addresses (Optional).
+| | ... | Type: string
 | |
 | | ... | *Example:*
 | |
 | | ... | \| Initialize IPv4 forwarding in circular topology \
-| | ... | \| 192.168.0.1 \| 192.168.0.2 \|
+| | ... | \| 192.168.0.1 \| 192.168.0.2 \| 24 \|
 | |
 | | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE}
+| | ... | ${remote_host_mask}=32
 | |
 | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
 | | ... | Variable Should Exist | ${dut2}
 | | ... | interface=${DUT2_${int}1}[0]
 | |
 | | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32
+| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | ${remote_host_mask}
 | | ... | gateway=10.10.10.2 | interface=${DUT1_${int}1}[0]
 | | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 32
+| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | ${remote_host_mask}
 | | ... | gateway=20.20.20.2 | interface=${dut_if2}
 | | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
 | | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32
+| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | ${remote_host_mask}
 | | ... | gateway=1.1.1.2 | interface=${DUT1_${int}2}[0]
 | | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
 | | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 32
+| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | ${remote_host_mask}
 | | ... | gateway=1.1.1.1 | interface=${DUT2_${int}1}[0]
 
 | Initialize IPv4 forwarding with scaling in circular topology
 | | ... | - nf_nodes - Number of guest VMs. Type: integer
 | | ... | - testpmd_mac - Switch for testpmd_mac test configuration.
 | | ... | Type: boolean
+| | ... | - virtio_feature_mask - Enabled Virtio features (Optional).
+| | ... | Type: integer
 | |
 | | ... | *Note:*
 | | ... | Socket paths for VM are defined in following format:
 | | ... | topology \| 1 \|
 | |
 | | [Arguments] | ${nf_nodes}=${1} | ${testpmd_mac}=${FALSE}
+| | ... | ${virtio_feature_mask}=${None}
 | |
 | | Set interfaces in path up
 | | ${fib_table_1}= | Set Variable | ${101}
 | | | Configure vhost interfaces | ${dut1}
 | | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
 | | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2
+| | | ... | virtio_feature_mask=${virtio_feature_mask}
 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up
 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up
 | | | Add Fib Table | ${dut1} | ${fib_table_1}
 | |
 | | ... | *Arguments:*
 | | ... | - nf_nodes - Number of guest VMs. Type: integer
+| | ... | - virtio_feature_mask - Enabled Virtio features (Optional).
+| | ... | Type: integer
 | |
 | | ... | *Note:*
 | | ... | Socket paths for VM are defined in following format:
 | | ... | topology \| 1 \|
 | |
 | | [Arguments] | ${nf_nodes}=${1} | ${testpmd_mac}=${FALSE}
+| | ... | ${virtio_feature_mask}=${None}
 | |
 | | Set interfaces in path up
 | | ${fib_table_1}= | Set Variable | ${101}
 | | | Configure vhost interfaces | ${dut1}
 | | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
 | | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2
+| | | ... | virtio_feature_mask=${virtio_feature_mask}
 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up
 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up
 | | | Configure vhost interfaces | ${dut2}
 | | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
 | | | ... | dut2-vhost-${number}-if1 | dut2-vhost-${number}-if2
+| | | ... | virtio_feature_mask=${virtio_feature_mask}
 | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up
 | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up
 | | | Add Fib Table | ${dut1} | ${fib_table_1}
 | | ... | Set Variable | ${dut2}
 | | ... | ELSE | Set Variable | ${dut1}
 | | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
+| | ... | Set Variable | ${DUT2_${int}2}[0]
 | | ... | ELSE | Set Variable | ${subif_index_1}
 | | VPP Add IP Neighbor
 | | ... | ${dut} | ${dut_if2} | 3.3.3.1 | ${TG_pf2_mac}[0]
 | | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2}
 | | ... | 2.2.2.2 | 30
 | | VPP Interface Set IP Address
-| | ...  | ${dut} | ${dut_if2} | 3.3.3.2 | 30
+| | ... | ${dut} | ${dut_if2} | 3.3.3.2 | 30
 | | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | gateway=1.1.1.1
 | | ... | interface=${DUT1_${int}1}[0]
 | | Run Keyword If | '${dut2_status}' == 'PASS'