-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Documentation | Keywords for VLAN tests
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
| Library | resources.libraries.python.L2Util
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.NodePath
+|
+| Documentation | Keywords for VLAN tests
*** Keywords ***
-
| Initialize VLAN sub-interfaces in 3-node circular topology
| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID}
-| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF}
-| | [Documentation] | *Create two subinterfaces on DUTs.*
-| | ...
+| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF}
+| | [Documentation] | Create two subinterfaces on DUTs.
+| |
| | ... | *Arguments:*
| | ... | - DUT1 - Node to add sub-interface.
-| | ... | - INT1 - Interface name on which create sub-interface.
+| | ... | - INT1 - Interface key on which create sub-interface.
| | ... | - DUT2 - Node to add sub-interface.
-| | ... | - INT2 - Interface name on which create sub-interface.
+| | ... | - INT2 - Interface key on which create sub-interface.
| | ... | - SUB_ID - ID of the sub-interface to be created.
| | ... | - OUTER_VLAN_ID - Outer VLAN ID.
| | ... | - INNER_VLAN_ID - Inner VLAN ID.
| | ... | - TYPE_SUBIF - Type of sub-interface.
-| | ...
+| |
| | ... | _Set testcase variables with name and index of created interfaces:_
| | ... | - subif_name_1
| | ... | - subif_index_1
| | ... | - subif_name_2
| | ... | - subif_index_2
-| | ...
+| |
+| | Set Interface State | ${DUT1} | ${INT1} | up
+| | Set Interface State | ${DUT2} | ${INT2} | up
| | ${INT1_name}= | Get interface name | ${DUT1} | ${INT1}
| | ${subif_name_1} | ${subif_index_1}= | Create subinterface | ${DUT1}
-| | ... | ${INT1_name} | ${SUB_ID}
-| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID}
-| | ... | ${TYPE_SUBIF}
+| | ... | ${INT1_name} | ${SUB_ID} | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID}
+| | ... | ${TYPE_SUBIF}
| | ${INT2_name}= | Get interface name | ${DUT2} | ${INT2}
| | ${subif_name_2} | ${subif_index_2}= | Create subinterface | ${DUT2}
-| | ... | ${INT2_name} | ${SUB_ID}
-| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID}
-| | ... | ${TYPE_SUBIF}
+| | ... | ${INT2_name} | ${SUB_ID} | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID}
+| | ... | ${TYPE_SUBIF}
| | Set Interface State | ${DUT1} | ${subif_index_1} | up
| | Set Interface State | ${DUT2} | ${subif_index_2} | up
| | Set Test Variable | ${subif_name_1}
| | Set Test Variable | ${subif_name_2}
| | Set Test Variable | ${subif_index_2}
-| Initialize VLAN dot1q sub-interfaces in 3-node circular topology
-| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID}
-| | [Documentation] | *Create two dot1q subinterfaces on DUTs.*
-| | ...
+| Initialize VLAN dot1q sub-interfaces in circular topology
+| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2}=${None} | ${INT2}=${None}
+| | ... | ${SUB_ID}=10
+| | [Documentation] | Create two dot1q subinterfaces on DUTs.
+| |
| | ... | *Arguments:*
| | ... | - DUT1 - Node to add sub-interface.
-| | ... | - INT1 - Interface name on which create VLAN sub-interface.
+| | ... | - INT1 - Interface key on which create VLAN sub-interface.
| | ... | - DUT2 - Node to add sub-interface.
-| | ... | - INT2 - Interface name on which create VLAN sub-interface.
+| | ... | - INT2 - Interface key on which create VLAN sub-interface.
| | ... | - SUB_ID - ID of the sub-interface to be created.
-| | ...
+| |
| | ... | _Set testcase variables with name and index of created interfaces:_
| | ... | - subif_name_1
| | ... | - subif_index_1
| | ... | - subif_name_2
| | ... | - subif_index_2
-| | ...
+| |
| | ... | *Example:*
-| | ...
-| | ... | \| Initialize VLAN dot1q sub-interfaces in 3-node circular topology \
+| |
+| | ... | \| Initialize VLAN dot1q sub-interfaces in circular topology \
| | ... | \| ${nodes['DUT1']} \| ${dut1_if2} \| ${nodes['DUT2']} \
| | ... | \| ${dut1_if2} \| 10 \|
-| | ...
+| |
+| | Set Interface State | ${DUT1} | ${INT1} | up
+| | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | Set Interface State | ${DUT2} | ${INT2} | up
| | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1}
-| | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2}
+| | ${INT2_NAME}= | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | Get interface name | ${DUT2} | ${INT2}
| | ${subif_name_1} | ${subif_index_1}= | Create Vlan Subinterface
-| | | ... | ${DUT1} | ${INT1_NAME} | ${SUB_ID}
-| | ${subif_name_2} | ${subif_index_2}= | Create Vlan Subinterface
-| | | ... | ${DUT2} | ${INT2_NAME} | ${SUB_ID}
+| | ... | ${DUT1} | ${INT1_NAME} | ${SUB_ID}
+| | ${subif_name_2} | ${subif_index_2}=
+| | ... | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | Create Vlan Subinterface | ${DUT2} | ${INT2_NAME} | ${SUB_ID}
| | Set Interface State | ${DUT1} | ${subif_index_1} | up
-| | Set Interface State | ${DUT2} | ${subif_index_2} | up
+| | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | Set Interface State | ${DUT2} | ${subif_index_2} | up
| | Set Test Variable | ${subif_name_1}
| | Set Test Variable | ${subif_index_1}
-| | Set Test Variable | ${subif_name_2}
-| | Set Test Variable | ${subif_index_2}
+| | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | Set Test Variable | ${subif_name_2}
+| | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | Set Test Variable | ${subif_index_2}
| Configure L2 tag rewrite method on interfaces
-| | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2} | ${SUB_INT2}
-| | ... | ${TAG_REWRITE_METHOD}
-| | [Documentation] | *Setup tag rewrite on sub-interfaces on DUTs.*
-| | ...
+| | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2}=${None} | ${SUB_INT2}=${None}
+| | ... | ${TAG_REWRITE_METHOD}=${None}
+| | [Documentation] | Setup tag rewrite on sub-interfaces on DUTs.
+| |
| | ... | *Arguments:*
| | ... | - DUT1 - Node to rewrite tags.
| | ... | - SUB_INT1 - Interface on which rewrite tags.
| | ... | - DUT2 - Node to rewrite tags.
| | ... | - SUB_INT2 - Interface on which rewrite tags.
| | ... | - TAG_REWRITE_METHOD - Method of tag rewrite.
-| | ...
+| |
| | L2 Vlan tag rewrite | ${DUT1} | ${SUB_INT1} | ${TAG_REWRITE_METHOD}
-| | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD}
-
-| Connect interfaces and VLAN sub-interfaces using L2XC
-| | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1}
-| | ... | ${DUT2} | ${INT2} | ${SUB_INT2}
-| | [Documentation] | *Add interface and subinterface to bidirectional
-| | ... | L2-xconnect on DUTs.*
-| | ...
-| | ... | *Arguments:*
-| | ... | - DUT1 - Node to add bidirectional cross-connect.
-| | ... | - INT1 - Interface to add to the cross-connect.
-| | ... | - SUB_INT1 - Sub-interface to add to the cross-connect.
-| | ... | - DUT2 - Node to add bidirectional cross-connect.
-| | ... | - INT2 - Interface to add to the cross-connect.
-| | ... | - SUB_INT2 - Sub-interface to add to the cross-connect.
-| | ...
-| | Configure L2XC | ${DUT1} | ${INT1} | ${SUB_INT1}
-| | Configure L2XC | ${DUT2} | ${INT2} | ${SUB_INT2}
-
-| Create vlan sub-interface
-| | [Documentation] | Create VLAN sub-interface on DUT and set admin status up.
-| | ...
-| | ... | *Arguments:*
-| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary
-| | ... | - interface - Interface to create VLAN sub-interface. Type: string
-| | ... | - vlan_id - VLAN ID. Type: integer
-| | ...
-| | ... | *Return:*
-| | ... | - vlan_name - VLAN sub-interface name. Type: string
-| | ... | - vlan_index - VLAN sub-interface SW index. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create vlan sub-interface \| ${nodes['DUT1']} \| port3 \| 100 \|
-| | ...
-| | [Arguments] | ${dut_node} | ${interface} | ${vlan_id}
-| | [Return] | ${vlan_name} | ${vlan_index}
-| | ${interface_name}= | Get interface name | ${dut_node} | ${interface}
-| | ${vlan_name} | ${vlan_index}= | Create Vlan Subinterface
-| | ... | ${dut_node} | ${interface_name} | ${vlan_id}
-| | Set Interface State | ${dut_node} | ${vlan_index} | up
-
-| Create tagged sub-interface
-| | [Documentation] | Create tagged sub-interface on DUT. Type of tagged \
-| | ... | sub-intreface depends on type_subif value:
-| | ... | - one_tag -> VLAN
-| | ... | - two_tags -> QinQ VLAN
-| | ... | - two_tags dot1ad - DOT1AD
-| | ...
-| | ... | *Arguments:*
-| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary
-| | ... | - interface - Interface to create tagged sub-interface. Type: string
-| | ... | - subif_id - Sub-interface ID. Type: integer
-| | ... | - outer_vlan_id - VLAN (outer) ID (Optional). Type: integer
-| | ... | - inner_vlan_id - VLAN inner ID (Optional). Type: integer
-| | ... | - type_subif - Sub-interface type (Optional). Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - subif_name - Sub-interface name. Type: string
-| | ... | - subif_index - Sub-interface SW index. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create tagged sub-interface \| ${nodes['DUT1']} \| port1 \| 10 \
-| | ... | \| outer_vlan_id=100 \| inner_vlan_id=200 \
-| | ... | \| type_subif=two_tags dot1ad \|
-| | ...
-| | [Arguments] | ${dut_node} | ${interface} | ${subif_id}
-| | ... | ${outer_vlan_id}=${None} | ${inner_vlan_id}=${None}
-| | ... | ${type_subif}=${None}
-| | [Return] | ${subif_name} | ${subif_index}
-| | ${interface_name}= | Get interface name | ${dut_node} | ${interface}
-| | ${subif_name} | ${subif_index}= | Create Subinterface
-| | ... | ${dut_node} | ${interface_name} | ${subif_id}
-| | ... | outer_vlan_id=${outer_vlan_id} | inner_vlan_id=${inner_vlan_id}
-| | ... | type_subif=${type_subif}
+| | Run Keyword Unless | ${DUT2} == ${None}
+| | ... | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD}
| Configure L2 tag rewrite method on interface
| | [Documentation] | Set L2 tag rewrite on (sub-)interface on DUT
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - dut_node - Node to set L2 tag rewrite method. Type: dictionary
| | ... | - interface - (Sub-)interface name or SW index to set L2 tag rewrite
| | ... | Dot1ad (Optional). Type: boolean
| | ... | - tag1_id - VLAN tag1 ID (Optional). Type: integer
| | ... | - tag2_id - VLAN tag2 ID (Optional). Type: integer
-| | ...
+| |
| | ... | *Return:*
-| | ...
+| |
| | ... | - No value returned
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Configure L2 tag rewrite method on interface \| ${nodes['DUT1']} \
| | ... | \| 9 \| pop-1 \|
| | ... | \| Configure L2 tag rewrite method on interface \| ${nodes['DUT2']} \
| | ... | \| 10 \| translate-1-2 \| push_dot1q=${False} \| tag1_id=10 \
| | ... | \| tag1_id=20 \|
-| | ...
+| |
| | [Arguments] | ${dut_node} | ${interface} | ${tag_rewrite_method}
| | ... | ${push_dot1q}=${True} | ${tag1_id}=${None} | ${tag2_id}=${None}
+| |
| | ${result}= | Evaluate | isinstance($interface, int)
-| | ${interface_name}= | Run Keyword If | ${result} | Set Variable | ${interface}
-| | ... | ELSE | Get interface name | ${dut_node} | ${interface}
-| | L2 Vlan Tag Rewrite | ${dut_node} | ${interface_name} | ${tag_rewrite_method}
-| | ... | push_dot1q=${push_dot1q} | tag1_id=${tag1_id} | tag2_id=${tag2_id}
+| | ${interface_name}= | Run Keyword If | ${result}
+| | ... | Set Variable | ${interface}
+| | ... | ELSE | Get interface name | ${dut_node} | ${interface}
+| | L2 Vlan Tag Rewrite | ${dut_node} | ${interface_name}
+| | ... | ${tag_rewrite_method} | push_dot1q=${push_dot1q} | tag1_id=${tag1_id}
+| | ... | tag2_id=${tag2_id}
Code Review / csit.git / blobdiff