--- /dev/null
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.SRv6
+| Documentation | Keywords for SRv6 feature in VPP.
+
+*** Keywords ***
+| Configure SR LocalSID on DUT
+| | [Documentation] | Create SRv6 LocalSID and binds it to a particular\
+| | ... | behavior on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to create localSID on. Type: dictionary
+| | ... | - local_sid - LocalSID IPv6 address. Type: string
+| | ... | - behavior - SRv6 LocalSID function. Type: string
+| | ... | - interface - Interface name (Optional, default value: None; required
+| | ... | for L2/L3 xconnects). Type: string
+| | ... | - next_hop - Next hop IPv4/IPv6 address (Optional, default value:
+| | ... | None; required for L3 xconnects). Type: string
+| | ... | - fib_table - FIB table for IPv4/IPv6 lookup (Optional, default value:
+| | ... | None; required for L3 routing). Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT1']} \| B:: \| end \|
+| | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT1']} \| C:: \
+| | ... | \| end.dx2 \| interface=GigabitEthernet0/10/0 \|
+| | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT1']} \| D:: \
+| | ... | \| end.dx4 \| interface=GigabitEthernet0/8/0 \| next_hop=10.0.0.1 \|
+| | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT2']} \| E:: \
+| | ... | \| end.dt6 \| fib_table=2 \|
+| | ...
+| | [Arguments] | ${dut_node} | ${local_sid} | ${behavior}
+| | ... | ${interface}=${None} | ${next_hop}=${None} | ${fib_table}=${None}
+| | ...
+| | Configure SR LocalSID | ${dut_node} | ${local_sid} | ${behavior}
+| | ... | interface=${interface} | next_hop=${next_hop} | fib_table=${fib_table}
+
+| Delete SR LocalSID on DUT
+| | [Documentation] | Delete SRv6 LocalSID on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to delete localSID on. Type: dictionary
+| | ... | - local_sid - LocalSID IPv6 address. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Delete SR LocalSID on DUT \| ${nodes['DUT1']} \| B:: \|
+| | ...
+| | [Arguments] | ${dut_node} | ${local_sid}
+| | ...
+| | Delete SR LocalSID | ${dut_node} | ${local_sid}
+
+| Show SR LocalSIDs on DUT
+| | [Documentation] | Show SRv6 LocalSIDs on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to show SR localSIDs on. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Show SR LocalSIDs on DUT \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${dut_node}
+| | ...
+| | Show SR LocalSIDs | ${dut_node}
+
+| Configure SR Policy on DUT
+| | [Documentation] | Create SRv6 policy on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to create SRv6 policy on. Type: dictionary
+| | ... | - bsid - BindingSID - local SID IPv6 address. Type: string
+| | ... | - mode - Encapsulation / insertion mode (Optional, default value:
+| | ... | encap). Type: string
+| | ... | - sid_list - SID list. Type: list
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure SR Policy on DUT \| ${nodes['DUT2']} \| D:: \
+| | ... | \| mode=insert \| E::\| F:: \|
+| | ...
+| | [Arguments] | ${dut_node} | ${bsid} | ${mode}=encap | @{sid_list}
+| | ...
+| | Configure SR Policy | ${dut_node} | ${bsid} | @{sid_list} | mode=${mode}
+
+| Delete SR Policy on DUT
+| | [Documentation] | Delete SRv6 policy on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to delete SRv6 policy on. Type: dictionary
+| | ... | - bsid - BindingSID - local SID IPv6 address. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Delete SR Policy on DUT \| ${nodes['DUT1']} \| A:: \|
+| | ...
+| | [Arguments] | ${dut_node} | ${bsid}
+| | ...
+| | Delete SR Policy | ${dut_node} | ${bsid}
+
+| Show SR Policies on DUT
+| | [Documentation] | Show SRv6 policies on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to show SR policies on. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Show SR Policies on DUT \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${dut_node}
+| | ...
+| | Show SR Policies | ${dut_node}
+
+| Configure SR Steer on DUT
+| | [Documentation] | Create SRv6 steering policy on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to create SR steering policy on.
+| | ... | Type: dictionary
+| | ... | - mode - Mode of operation - L2 or L3. Type: string
+| | ... | - bsid - BindingSID - local SID IPv6 address. Type: string
+| | ... | - interface - Interface name (Optional, default value: None; required
+| | ... | in case of L2 mode). Type: string
+| | ... | - ip_addr - IPv4/IPv6 address (Optional, default value: None; required
+| | ... | in case of L3 mode). Type: string
+| | ... | - prefix - IP address prefix (Optional, default value: None; required
+| | ... | for L3 mode). Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure SR Steer on DUT \| ${nodes['DUT1']} \| L2 \| B:: \
+| | ... | \| interface=GigabitEthernet0/10/0 \|
+| | ... | \| Configure SR Steer on DUT \| ${nodes['DUT1']} \| L3 \| C:: \
+| | ... | \| ip_address=2001::1 \| prefix=64 \|
+| | ...
+| | [Arguments] | ${dut_node} | ${mode} | ${bsid}
+| | ... | ${interface}=${None} | ${ip_addr}=${None} | ${prefix}=${None}
+| | ...
+| | Configure SR Steer | ${dut_node} | ${mode} | ${bsid}
+| | ... | interface=${interface} | ip_addr=${ip_addr} | prefix=${prefix}
+
+| Delete SR Steer on DUT
+| | [Documentation] | Delete SRv6 steering policy on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to delete SR steering policy on.
+| | ... | Type: dictionary
+| | ... | - mode - Mode of operation - L2 or L3. Type: string
+| | ... | - bsid - BindingSID - local SID IPv6 address. Type: string
+| | ... | - interface - Interface name (Optional, default value: None; required
+| | ... | in case of L2 mode). Type: string
+| | ... | - ip_addr - IPv4/IPv6 address (Optional, default value: None; required
+| | ... | in case of L3 mode). Type: string
+| | ... | - prefix - IP address prefix (Optional, default value: None; required
+| | ... | for L3 mode). Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Delete SR Steer on DUT \| ${nodes['DUT1']} \| L2 \| B:: \
+| | ... | \| interface=GigabitEthernet0/10/0 \|
+| | ... | \| Delete SR Steer on DUT \| ${nodes['DUT1']} \| L3 \| C:: \
+| | ... | \| ip_address=2001::1 \| prefix=64 \|
+| | ...
+| | [Arguments] | ${dut_node} | ${mode} | ${bsid}
+| | ... | ${interface}=${None} | ${ip_addr}=${None} | ${prefix}=${None}
+| | ...
+| | Delete SR Steer | ${dut_node} | ${mode} | ${bsid}
+| | ... | interface=${interface} | ip_addr=${ip_addr} | prefix=${prefix}
+
+| Show SR Steering Policies on DUT
+| | [Documentation] | Show SRv6 steering policies on the given DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to show SR steering policies on.
+| | ... | Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Show SR Steering Policies on DUT \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${dut_node}
+| | ...
+| | Show SR Steering Policies | ${dut_node}
+
+| Set SR Encaps Source Address on DUT
+| | [Documentation] | Set SRv6 encapsulation source address on the given DUT
+| | ... | node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node where to set SRv6 encapsulation source address
+| | ... | on. Type: dictionary
+| | ... | - ip6_addr - Local SID IPv6 address. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Set SR Encaps Source Address on DUT \| ${nodes['DUT1']} \| B:: \|
+| | ...
+| | [Arguments] | ${dut_node} | ${ip6_addr}
+| | ...
+| | Set SR Encaps Source Address | ${dut_node} | ip6_addr=${ip6_addr}
Code Review / csit.git / blobdiff