| | [Documentation] | Setup performance rates as Suite Variables
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - ${10Ge_linerate_pps_64B} - Maximum number of packet per second
-| | ... | for 10GE with 64B L2 Frame.
-| | ... | - ${10Ge_linerate_pps_68B} - Maximum number of packet per second
-| | ... | for 10GE with 68B L2 Frame.
-| | ... | - ${10Ge_linerate_pps_78B} - Maximum number of packet per second
-| | ... | for 10GE with 78B L2 Frame.
-| | ... | - ${10Ge_linerate_pps_1518B} - Maximum number of packet per second
-| | ... | for 10GE with 1518B L2 Frame.
-| | ... | - ${10Ge_linerate_pps_1522B} - Maximum number of packet per second
-| | ... | for 10GE with 1522B L2 Frame.
-| | ... | - ${10Ge_linerate_pps_9000B} - Maximum number of packet per second
-| | ... | for 10GE with 9000B L2 Frame.
-| | ... | - ${10Ge_linerate_pps_9004B} - Maximum number of packet per second
-| | ... | for 10GE with 9004B L2 Frame.
-| | ...
-| | ${10Ge_linerate_pps_64B}= | Set Variable | 14880952
-| | ${10Ge_linerate_pps_68B}= | Set Variable | 14204545
-| | ${10Ge_linerate_pps_78B}= | Set Variable | 12755102
-| | ${10Ge_linerate_pps_1518B}= | Set Variable | 812743
-| | ${10Ge_linerate_pps_1522B}= | Set Variable | 810635
-| | ${10Ge_linerate_pps_9000B}= | Set Variable | 138580
-| | ${10Ge_linerate_pps_9004B}= | Set Variable | 138519
-| | Set Suite Variable | ${10Ge_linerate_pps_64B}
-| | Set Suite Variable | ${10Ge_linerate_pps_68B}
-| | Set Suite Variable | ${10Ge_linerate_pps_78B}
-| | Set Suite Variable | ${10Ge_linerate_pps_1518B}
-| | Set Suite Variable | ${10Ge_linerate_pps_1522B}
-| | Set Suite Variable | ${10Ge_linerate_pps_9000B}
-| | Set Suite Variable | ${10Ge_linerate_pps_9004B}
+| | ... | - 10Ge_linerate_pps_64B - Maximum number of packet per second
+| | ... | for 10GE with 64B L2 Frame.
+| | ... | - 10Ge_linerate_pps_68B - Maximum number of packet per second
+| | ... | for 10GE with 68B L2 Frame.
+| | ... | - 10Ge_linerate_pps_72B - Maximum number of packet per second
+| | ... | for 10GE with 72B L2 Frame.
+| | ... | - 10Ge_linerate_pps_78B - Maximum number of packet per second
+| | ... | for 10GE with 78B L2 Frame.
+| | ... | - 10Ge_linerate_pps_1518B - Maximum number of packet per second
+| | ... | for 10GE with 1518B L2 Frame.
+| | ... | - 10Ge_linerate_pps_1522B - Maximum number of packet per second
+| | ... | for 10GE with 1522B L2 Frame.
+| | ... | - 10Ge_linerate_pps_1526B - Maximum number of packet per second
+| | ... | for 10GE with 1526B L2 Frame.
+| | ... | - 10Ge_linerate_pps_9000B - Maximum number of packet per second
+| | ... | for 10GE with 9000B L2 Frame.
+| | ... | - 10Ge_linerate_pps_9004B - Maximum number of packet per second
+| | ... | for 10GE with 9004B L2 Frame.
+| | ... | - 10Ge_linerate_pps_9008B - Maximum number of packet per second
+| | ... | for 10GE with 9008B L2 Frame.
+| | ... | - 40Ge_linerate_pps_64B - Maximum number of packet per second
+| | ... | for 40GE with 64B L2 Frame.
+| | ... | - 40Ge_linerate_pps_68B - Maximum number of packet per second
+| | ... | for 40GE with 68B L2 Frame.
+| | ... | - 40Ge_linerate_pps_72B - Maximum number of packet per second
+| | ... | for 40GE with 72B L2 Frame.
+| | ... | - 40Ge_linerate_pps_78B - Maximum number of packet per second
+| | ... | for 40GE with 78B L2 Frame.
+| | ... | - 40Ge_linerate_pps_1518B - Maximum number of packet per second
+| | ... | for 40GE with 1518B L2 Frame.
+| | ... | - 40Ge_linerate_pps_1522B - Maximum number of packet per second
+| | ... | for 40GE with 1522B L2 Frame.
+| | ... | - 40Ge_linerate_pps_1526B - Maximum number of packet per second
+| | ... | for 40GE with 1526B L2 Frame.
+| | ... | - 40Ge_linerate_pps_9000B - Maximum number of packet per second
+| | ... | for 40GE with 9000B L2 Frame.
+| | ... | - 40Ge_linerate_pps_9004B - Maximum number of packet per second
+| | ... | for 40GE with 9004B L2 Frame.
+| | ... | - 40Ge_linerate_pps_9008B - Maximum number of packet per second
+| | ... | for 40GE with 9008B L2 Frame.
+| | ...
+| | Set Suite Variable | ${10Ge_linerate_pps_64B} | 14880952
+| | Set Suite Variable | ${10Ge_linerate_pps_68B} | 14204545
+| | Set Suite Variable | ${10Ge_linerate_pps_72B} | 13586956
+| | Set Suite Variable | ${10Ge_linerate_pps_78B} | 12755102
+| | Set Suite Variable | ${10Ge_linerate_pps_1518B} | 812743
+| | Set Suite Variable | ${10Ge_linerate_pps_1522B} | 810635
+| | Set Suite Variable | ${10Ge_linerate_pps_9000B} | 138580
+| | Set Suite Variable | ${10Ge_linerate_pps_9004B} | 138519
+| | Set Suite Variable | ${10Ge_linerate_pps_9008B} | 138458
+| | Set Suite Variable | ${40Ge_linerate_pps_64B} | 59523809
+| | Set Suite Variable | ${40Ge_linerate_pps_68B} | 56818181
+| | Set Suite Variable | ${40Ge_linerate_pps_72B} | 54347826
+| | Set Suite Variable | ${40Ge_linerate_pps_78B} | 51020408
+| | Set Suite Variable | ${40Ge_linerate_pps_1518B} | 3250975
+| | Set Suite Variable | ${40Ge_linerate_pps_1522B} | 3242542
+| | Set Suite Variable | ${40Ge_linerate_pps_9000B} | 554323
+| | Set Suite Variable | ${40Ge_linerate_pps_9004B} | 554078
+| | Set Suite Variable | ${40Ge_linerate_pps_9008B} | 553832
| Setup performance global Variables
| | [Documentation] | Setup performance global Variables
| | ... | - ${glob_loss_acceptance} - Loss acceptance treshold
| | ... | - ${glob_loss_acceptance_type} - Loss acceptance treshold type
| | ...
-| | ${glob_loss_acceptance}= | Set Variable | 0.5
-| | ${glob_loss_acceptance_type}= | Set Variable | percentage
-| | Set Suite Variable | ${glob_loss_acceptance}
-| | Set Suite Variable | ${glob_loss_acceptance_type}
+| | Set Suite Variable | ${glob_loss_acceptance} | 0.5
+| | Set Suite Variable | ${glob_loss_acceptance_type} | percentage
| 2-node circular Topology Variables Setup
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | Set Search Frame Size | ${framesize}
| | Set Search Rate Type pps
| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream}= | Verify Search Result
+| | ${rate_per_stream} | ${latency}= | Verify Search Result
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
+| | ... | ${latency}
| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
| | ... | ${framesize} | ${topology_type}
| | ... | fail_on_loss=${False}
| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
| | ... | Set Loss Acceptance Type Percentage
| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream}= | Verify Search Result
+| | ${rate_per_stream} | ${latency}= | Verify Search Result
| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
| | ... | ${loss_acceptance} | ${loss_acceptance_type}
+| | ... | ${latency}
| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
| | ... | ${framesize} | ${topology_type}
| | ... | ${loss_acceptance}
| | Set Search Rate Type pps
| | Set Binary Convergence Threshold | ${threshold}
| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream}= | Verify Search Result
+| | ${rate_per_stream} | ${latency}= | Verify Search Result
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
+| | ... | ${latency}
| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
| | ... | ${framesize} | ${topology_type}
| | ... | fail_on_loss=${False}
| | ... | Set Loss Acceptance Type Percentage
| | Set Binary Convergence Threshold | ${threshold}
| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream}= | Verify Search Result
+| | ${rate_per_stream} | ${latency}= | Verify Search Result
| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
| | ... | ${loss_acceptance} | ${loss_acceptance_type}
+| | ... | ${latency}
| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
| | ... | ${framesize} | ${topology_type}
| | ... | ${loss_acceptance}
| | Set Search Rate Type pps
| | Set Binary Convergence Threshold | ${threshold}
| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream}= | Verify Search Result
+| | ${rate_per_stream} | ${latency}= | Verify Search Result
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
+| | ... | ${latency}
| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
| | ... | ${framesize} | ${topology_type}
| | ... | fail_on_loss=${False}
| | ... | Set Loss Acceptance Type Percentage
| | Set Binary Convergence Threshold | ${threshold}
| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream}= | Verify Search Result
+| | ${rate_per_stream} | ${latency}= | Verify Search Result
| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
| | ... | ${loss_acceptance} | ${loss_acceptance_type}
+| | ... | ${latency}
| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
| | ... | ${framesize} | ${topology_type}
| | ... | ${loss_acceptance}
| | ... | - ${rate_per_stream} - Measured rate per stream [pps]. Type: string
| | ... | - ${framesize} - L2 Frame Size [B]. Type: integer
| | ... | - ${nr_streams} - Total number of streams. Type: integer
+| | ... | - ${latency} - Latency stats. Type: dictionary
| | ...
| | ... | *Return:*
| | ... | - No value returned
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2
+| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \
+| | ... | \| (0, 10/10/10) \|
| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams}
+| | ... | ${latency}
| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
| | Set Test Message | FINAL_RATE: ${rate_total} pps
-| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
-| | Set Test Message | FINAL_BANDWIDTH: ${bandwidth_total} Gbps | append=yes
+| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps)
+| | ... | append=yes
+| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
+| | ... | append=yes
+| | :FOR | ${idx} | ${lat} | IN ENUMERATE | @{latency}
+| | | Set Test Message | ${\n}LATENCY_STREAM_${idx}: ${lat} usec (min/avg/max)
+| | ... | append=yes
| Display result of PDR search
| | [Documentation] | Display result of PDR search in packet per seconds (total
| | ... | - ${nr_streams} - Total number of streams. Type: integer
| | ... | - ${loss_acceptance} - Accepted loss during search. Type: float
| | ... | - ${loss_acceptance_type} - Percentage or frames. Type: string
+| | ... | - ${latency} - Latency stats. Type: dictionary
| | ...
| | ... | *Return:*
| | ... | - No value returned
| | ... | *Example:*
| | ...
| | ... | \| Display result of PDR search \| 4400000 \| 64 \| 2 \| 0.5 \
-| | ... | \| percentage
+| | ... | \| percentage \| (0, 10/10/10) \|
| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams}
-| | ... | ${loss_acceptance} | ${loss_acceptance_type}
+| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
| | Set Test Message | FINAL_RATE: ${rate_total} pps
-| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
-| | Set Test Message | FINAL_BANDWIDTH: ${bandwidth_total} Gbps | append=yes
+| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps)
+| | ... | append=yes
+| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
+| | ... | append=yes
+| | :FOR | ${idx} | ${lat} | IN ENUMERATE | @{latency}
+| | | Set Test Message | ${\n}LATENCY_STREAM_${idx}: ${lat} usec (min/avg/max)
+| | ... | append=yes
| | Set Test Message | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type}
| | ... | append=yes
| Clear and show runtime counters with running traffic
| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
| | Send traffic on tg | -1 | ${rate} | ${framesize}
-| | ... | ${topology_type} | warmup_time=0 | async_call=True
+| | ... | ${topology_type} | warmup_time=0 | async_call=${True}
+| | ... | latency=${False}
| | Clear runtime counters on all DUTs
| | Sleep | ${duration}
| | Show runtime counters on all DUTs