*** Settings ***
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.DpdkUtil
| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.VhostUser
| Library | resources.libraries.python.TrafficGenerator
| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/l2_xconnect.robot
| Resource | resources/libraries/robot/ipv4.robot
| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/qemu.robot
| Documentation | Performance suite keywords
*** Keywords ***
-| Setup performance rate Variables
-| | [Documentation]
-| | ... | Setup performance linerates as Suite Variables. Variables are used
-| | ... | as search boundaries in RFC2544 throughput search.
-| | ...
-| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - 10Ge_linerate_pps_64B - Maximum number of packet per second
-| | ... | for 10GE with 64B L2 Frame.
-| | ... | - 10Ge_linerate_pps_68B - Maximum number of packet per second
-| | ... | for 10GE with 68B L2 Frame.
-| | ... | - 10Ge_linerate_pps_72B - Maximum number of packet per second
-| | ... | for 10GE with 72B L2 Frame.
-| | ... | - 10Ge_linerate_pps_78B - Maximum number of packet per second
-| | ... | for 10GE with 78B L2 Frame.
-| | ... | - 10Ge_linerate_pps_1518B - Maximum number of packet per second
-| | ... | for 10GE with 1518B L2 Frame.
-| | ... | - 10Ge_linerate_pps_1522B - Maximum number of packet per second
-| | ... | for 10GE with 1522B L2 Frame.
-| | ... | - 10Ge_linerate_pps_1526B - Maximum number of packet per second
-| | ... | for 10GE with 1526B L2 Frame.
-| | ... | - 10Ge_linerate_pps_9000B - Maximum number of packet per second
-| | ... | for 10GE with 9000B L2 Frame.
-| | ... | - 10Ge_linerate_pps_9004B - Maximum number of packet per second
-| | ... | for 10GE with 9004B L2 Frame.
-| | ... | - 10Ge_linerate_pps_9008B - Maximum number of packet per second
-| | ... | for 10GE with 9008B L2 Frame.
-| | ... | - 10Ge_linerate_pps_IMIX_v4_1 - Maximum number of packet per second
-| | ... | for 10GE with IMIX_v4_1 profile.
-| | ... | - 40Ge_linerate_pps_64B - Maximum number of packet per second
-| | ... | for 40GE with 64B L2 Frame.
-| | ... | - 40Ge_linerate_pps_68B - Maximum number of packet per second
-| | ... | for 40GE with 68B L2 Frame.
-| | ... | - 40Ge_linerate_pps_72B - Maximum number of packet per second
-| | ... | for 40GE with 72B L2 Frame.
-| | ... | - 40Ge_linerate_pps_78B - Maximum number of packet per second
-| | ... | for 40GE with 78B L2 Frame.
-| | ... | - 40Ge_linerate_pps_1518B - Maximum number of packet per second
-| | ... | for 40GE with 1518B L2 Frame.
-| | ... | - 40Ge_linerate_pps_1522B - Maximum number of packet per second
-| | ... | for 40GE with 1522B L2 Frame.
-| | ... | - 40Ge_linerate_pps_1526B - Maximum number of packet per second
-| | ... | for 40GE with 1526B L2 Frame.
-| | ... | - 40Ge_linerate_pps_9000B - Maximum number of packet per second
-| | ... | for 40GE with 9000B L2 Frame.
-| | ... | - 40Ge_linerate_pps_9004B - Maximum number of packet per second
-| | ... | for 40GE with 9004B L2 Frame.
-| | ... | - 40Ge_linerate_pps_9008B - Maximum number of packet per second
-| | ... | for 40GE with 9008B L2 Frame.
-| | ... | - 40Ge_linerate_pps_IMIX_v4_1 - Maximum number of packet per second
-| | ... | for 40GE with IMIX_v4_1 profile.
-| | ...
-| | Set Suite Variable | ${10Ge_linerate_pps_64B} | 14880952
-| | Set Suite Variable | ${10Ge_linerate_pps_68B} | 14204545
-| | Set Suite Variable | ${10Ge_linerate_pps_72B} | 13586956
-| | Set Suite Variable | ${10Ge_linerate_pps_78B} | 12755102
-| | Set Suite Variable | ${10Ge_linerate_pps_1518B} | 812743
-| | Set Suite Variable | ${10Ge_linerate_pps_1522B} | 810635
-| | Set Suite Variable | ${10Ge_linerate_pps_9000B} | 138580
-| | Set Suite Variable | ${10Ge_linerate_pps_9004B} | 138519
-| | Set Suite Variable | ${10Ge_linerate_pps_9008B} | 138458
-| | Set Suite Variable | ${10Ge_linerate_pps_IMIX_v4_1} | 3343736
-| | Set Suite Variable | ${40Ge_linerate_pps_64B} | 59523809
-| | Set Suite Variable | ${40Ge_linerate_pps_68B} | 56818181
-| | Set Suite Variable | ${40Ge_linerate_pps_72B} | 54347826
-| | Set Suite Variable | ${40Ge_linerate_pps_78B} | 51020408
-| | Set Suite Variable | ${40Ge_linerate_pps_1518B} | 3250975
-| | Set Suite Variable | ${40Ge_linerate_pps_1522B} | 3242542
-| | Set Suite Variable | ${40Ge_linerate_pps_9000B} | 554323
-| | Set Suite Variable | ${40Ge_linerate_pps_9004B} | 554078
-| | Set Suite Variable | ${40Ge_linerate_pps_9008B} | 553832
-| | Set Suite Variable | ${40Ge_linerate_pps_IMIX_v4_1} | 13374944
-
| Calculate pps
| | [Documentation]
| | ... | Calculate pps for given rate and L2 frame size,
| | ...
| | ... | \| Calculate pps \| 10000000000 | 64
| | [Arguments] | ${bps} | ${framesize}
+| | ${framesize}= | Get Frame Size | ${framesize}
| | ${ret}= | Evaluate | (${bps}/((${framesize}+20)*8)).__trunc__()
| | Return From Keyword | ${ret}
| | ... | _NOTE:_ This KW sets following suite variables:
| | ... | - glob_loss_acceptance - Loss acceptance treshold
| | ... | - glob_loss_acceptance_type - Loss acceptance treshold type
+| | ... | - glob_vm_image - Guest VM disk image
| | ...
| | Set Suite Variable | ${glob_loss_acceptance} | 0.5
| | Set Suite Variable | ${glob_loss_acceptance_type} | percentage
+| | Set Suite Variable | ${glob_vm_image} | /var/lib/vm/csit-nested-1.3.img
| 2-node circular Topology Variables Setup
| | [Documentation]
| | ... | count=${count}
| | All Vpp Interfaces Ready Wait | ${nodes}
+| IPv4 forwarding with vhost initialized in a 3-node circular topology
+| | [Documentation]
+| | ... | Create vhost-user interfaces in VPP. Set UP state of all VPP
+| | ... | interfaces in path on nodes in 3-node circular topology. Create 2
+| | ... | FIB tables on each DUT with multipath routing. Assign pair of
+| | ... | Physical and Virtual interfaces on both nodes to each FIB table.
+| | ... | Setup IPv4 addresses with /30 prefix on DUT-TG links and /30 prefix
+| | ... | on DUT1-DUT2 link. Set routing on all DUT nodes in all FIB tables
+| | ... | with prefix /24 and next hop of neighbour IPv4 address. Setup
+| | ... | ARP on all VPP interfaces.
+| | ...
+| | ... | *Arguments:*
+| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string
+| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| IPv4 forwarding with vhost initialized in a 3-node circular \
+| | ... | topology \| /tmp/sock1 \| /tmp/sock2 \|
+| | [Arguments] | ${sock1} | ${sock2}
+| | VPP interfaces in path are up in a 3-node circular topology
+| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | ${dut1_vif1}= | Set Variable | ${vhost_if1}
+| | ${dut1_vif2}= | Set Variable | ${vhost_if2}
+| | Set Interface State | ${dut1} | ${dut1_vif1} | up
+| | Set Interface State | ${dut1} | ${dut1_vif2} | up
+| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | ${dut2_vif1}= | Set Variable | ${vhost_if1}
+| | ${dut2_vif2}= | Set Variable | ${vhost_if2}
+| | Set Interface State | ${dut2} | ${dut2_vif1} | up
+| | Set Interface State | ${dut2} | ${dut2_vif2} | up
+| | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif1}
+| | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif2}
+| | ${dut1_if1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if2}
+| | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif1}
+| | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif2}
+| | ${dut2_if1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if2}
+| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1}
+| | ... | via 4.4.4.2 sw_if_index ${dut1_vif1_idx} multipath
+| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_1}
+| | ... | via 1.1.1.2 sw_if_index ${dut1_if1_idx} multipath
+| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_2}
+| | ... | via 2.2.2.2 sw_if_index ${dut1_if2_idx} multipath
+| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2}
+| | ... | via 5.5.5.2 sw_if_index ${dut1_vif2_idx} multipath
+| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_1}
+| | ... | via 2.2.2.1 sw_if_index ${dut2_if1_idx} multipath
+| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1}
+| | ... | via 4.4.4.1 sw_if_index ${dut2_vif1_idx} multipath
+| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2}
+| | ... | via 5.5.5.2 sw_if_index ${dut2_vif2_idx} multipath
+| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_2}
+| | ... | via 3.3.3.2 sw_if_index ${dut2_if2_idx} multipath
+| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
+| | Assign Interface To Fib Table | ${dut1} | ${dut1_vif1} | ${fib_table_1}
+| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
+| | Assign Interface To Fib Table | ${dut1} | ${dut1_vif2} | ${fib_table_2}
+| | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1}
+| | Assign Interface To Fib Table | ${dut2} | ${dut2_vif1} | ${fib_table_1}
+| | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2}
+| | Assign Interface To Fib Table | ${dut2} | ${dut2_vif2} | ${fib_table_2}
+| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30
+| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30
+| | IP addresses are set on interfaces | ${dut1} | ${dut1_vif1} | 4.4.4.1 | 30
+| | IP addresses are set on interfaces | ${dut1} | ${dut1_vif2} | 5.5.5.1 | 30
+| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30
+| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.1 | 30
+| | IP addresses are set on interfaces | ${dut2} | ${dut2_vif1} | 4.4.4.1 | 30
+| | IP addresses are set on interfaces | ${dut2} | ${dut2_vif2} | 5.5.5.1 | 30
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1}
+| | ... | ${dut1_vif1_idx}
+| | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1}
+| | ... | ${dut1_vif2_idx}
+| | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2}
+| | ... | ${dut2_vif1_idx}
+| | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2}
+| | ... | ${dut2_vif2_idx}
+| | Set Test Variable | ${dut1_vif1_mac}
+| | Set Test Variable | ${dut1_vif2_mac}
+| | Set Test Variable | ${dut2_vif1_mac}
+| | Set Test Variable | ${dut2_vif2_mac}
+| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac}
+| | ... | vrf=${fib_table_1}
+| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac}
+| | ... | vrf=${fib_table_2}
+| | Add arp on dut | ${dut1} | ${dut1_vif1} | 4.4.4.2 | 52:54:00:00:04:01
+| | ... | vrf=${fib_table_1}
+| | Add arp on dut | ${dut1} | ${dut1_vif2} | 5.5.5.2 | 52:54:00:00:04:02
+| | ... | vrf=${fib_table_2}
+| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac}
+| | ... | vrf=${fib_table_1}
+| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac}
+| | ... | vrf=${fib_table_2}
+| | Add arp on dut | ${dut2} | ${dut2_vif1} | 4.4.4.2 | 52:54:00:00:04:01
+| | ... | vrf=${fib_table_1}
+| | Add arp on dut | ${dut2} | ${dut2_vif2} | 5.5.5.2 | 52:54:00:00:04:02
+| | ... | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 4.4.4.2 | ${dut1_vif1}
+| | ... | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1}
+| | ... | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2}
+| | ... | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 5.5.5.2 | ${dut1_vif2}
+| | ... | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 4.4.4.2 | ${dut2_vif1}
+| | ... | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 2.2.2.1 | ${dut2_if1}
+| | ... | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2}
+| | ... | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 5.5.5.2 | ${dut2_vif2}
+| | ... | vrf=${fib_table_2}
+
+| IPv4 policer 2r3c-${t} initialized in a 3-node circular topology
+| | [Documentation]
+| | ... | Setup of 2r3c color-aware or color-blind policer with dst ip match
+| | ... | on all DUT nodes in 3-node circular topology. Policer is applied on
+| | ... | links TG - DUT1 and DUT2 - TG.
+| | ...
+| | ${dscp}= | DSCP AF22
+| | Policer Set Name | policer1
+| | Policer Set CIR | ${cir}
+| | Policer Set EIR | ${eir}
+| | Policer Set CB | ${cb}
+| | Policer Set EB | ${eb}
+| | Policer Set Rate Type pps
+| | Policer Set Round Type Closest
+| | Policer Set Type 2R3C 2698
+| | Policer Set Conform Action Transmit
+| | Policer Set Exceed Action Mark and Transmit | ${dscp}
+| | Policer Set Violate Action Transmit
+| | Policer Enable Color Aware
+| | Run Keyword If | ${t} == 'ca' | Policer Enable Color Aware
+| | Policer Classify Set Precolor Exceed
+| | Policer Set Node | ${dut1}
+| | Policer Classify Set Interface | ${dut1_if1}
+| | Policer Classify Set Match IP | 20.20.20.2 | ${False}
+| | Policer Set Configuration
+| | Policer Set Node | ${dut2}
+| | Policer Classify Set Interface | ${dut2_if2}
+| | Policer Classify Set Match IP | 10.10.10.2 | ${False}
+| | Policer Set Configuration
+
| IPv6 forwarding initialized in a 3-node circular topology
| | [Documentation]
| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular
| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | 2001:3::2
| | ... | interface=${dut1_if1} | count=${count}
| | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} | 2001:4::1
-| | ... | interface=${dut2_if2} | count=${count}
-| | Vpp Route Add | ${dut2} | 2001:2::0 | ${host_prefix} | 2001:5::2
| | ... | interface=${dut2_if1} | count=${count}
+| | Vpp Route Add | ${dut2} | 2001:2::0 | ${host_prefix} | 2001:5::2
+| | ... | interface=${dut2_if2} | count=${count}
| IPv6 iAcl whitelist initialized in a 3-node circular topology
| | [Documentation]
| | L2 setup xconnect on DUT | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | All Vpp Interfaces Ready Wait | ${nodes}
+| L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | [Documentation]
+| | ... | Setup L2 xconnect topology with VXLANoIPv4 by cross connecting
+| | ... | physical and vxlan interfaces on each DUT. All interfaces are brought
+| | ... | up. IPv4 addresses with prefix /24 are configured on interfaces
+| | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as
+| | ... | interfaces.
+| | ...
+| | VPP interfaces in path are up in a 3-node circular topology
+| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1
+| | ... | 24
+| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2
+| | ... | 24
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | Add arp on dut | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac}
+| | Add arp on dut | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac}
+| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24
+| | ... | 172.16.0.1 | 172.16.0.2
+| | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24
+| | ... | 172.16.0.2 | 172.16.0.1
+| | L2 setup xconnect on DUT | ${dut2} | ${dut2_if2} | ${dut2s_vxlan}
+
+| L2 xconnect with Vhost-User initialized in a 3-node circular topology
+| | [Documentation]
+| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Cross
+| | ... | connect each Vhost interface with one physical interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string
+| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| L2 xconnect with Vhost-User initialized in a 3-node \
+| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \|
+| | [Arguments] | ${sock1} | ${sock2}
+| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${vhost_if1}
+| | L2 setup xconnect on DUT | ${dut1} | ${dut1_if2} | ${vhost_if2}
+| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | L2 setup xconnect on DUT | ${dut2} | ${dut2_if1} | ${vhost_if1}
+| | L2 setup xconnect on DUT | ${dut2} | ${dut2_if2} | ${vhost_if2}
+| | All Vpp Interfaces Ready Wait | ${nodes}
+
| L2 bridge domain initialized in a 3-node circular topology
| | [Documentation]
| | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD
| | Vpp l2bd forwarding setup | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | All Vpp Interfaces Ready Wait | ${nodes}
+| L2 bridge domains with Vhost-User initialized in a 3-node circular topology
+| | [Documentation]
+| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each
+| | ... | Vhost-User interface into L2 bridge domains with learning enabled
+| | ... | with physical inteface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - bd_id1 - Bridge domain ID. Type: integer
+| | ... | - bd_id2 - Bridge domain ID. Type: integer
+| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string
+| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| L2 bridge domains with Vhost-User initialized in a 3-node \
+| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \|
+| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
+| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1}
+| | Interface is added to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1}
+| | Interface is added to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2}
+| | Interface is added to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2}
+| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | Interface is added to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id1}
+| | Interface is added to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1}
+| | Interface is added to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
+| | Interface is added to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2}
+| | All Vpp Interfaces Ready Wait | ${nodes}
+
2-node Performance Suite Setup with DUT's NIC model
| | [Documentation]
| | ... | Suite preparation phase that setup default startup configuration of
| | [Arguments] | ${topology_type} | ${nic_model}
| | Setup default startup configuration of VPP on all DUTs
| | Show vpp version on all DUTs
-| | Setup performance rate Variables
| | Setup performance global Variables
| | 2-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | [Arguments] | ${topology_type} | ${nic_model}
| | Setup default startup configuration of VPP on all DUTs
| | Show vpp version on all DUTs
-| | Setup performance rate Variables
| | Setup performance global Variables
| | 3-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Set Search Frame Size | ${framesize}
| | Set Search Rate Type pps
| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${latency}= | Verify Search Result
+| | ${rate_per_stream} | ${lat}= | Verify Search Result
+| | ${tmp}= | Create List | 100%NDR | ${lat}
+| | ${latency}= | Create List | ${tmp}
+| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
+| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
+| | ... | ${framesize} | ${topology_type}
+| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
+| | Append To List | ${latency} | ${tmp}
+| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
+| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
+| | ... | ${framesize} | ${topology_type}
+| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
+| | Append To List | ${latency} | ${tmp}
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
| | ... | ${latency}
| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
| | Set Search Rate Type pps
| | Set Binary Convergence Threshold | ${threshold}
| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream} | ${latency}= | Verify Search Result
+| | ${rate_per_stream} | ${lat}= | Verify Search Result
+| | ${tmp}= | Create List | 100%NDR | ${lat}
+| | ${latency}= | Create List | ${tmp}
+| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
+| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
+| | ... | ${framesize} | ${topology_type}
+| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
+| | Append To List | ${latency} | ${tmp}
+| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
+| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
+| | ... | ${framesize} | ${topology_type}
+| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
+| | Append To List | ${latency} | ${tmp}
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
| | ... | ${latency}
| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
| | Set Search Rate Type pps
| | Set Binary Convergence Threshold | ${threshold}
| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${latency}= | Verify Search Result
+| | ${rate_per_stream} | ${lat}= | Verify Search Result
+| | ${tmp}= | Create List | 100%NDR | ${lat}
+| | ${latency}= | Create List | ${tmp}
+| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
+| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
+| | ... | ${framesize} | ${topology_type}
+| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
+| | Append To List | ${latency} | ${tmp}
+| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
+| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
+| | ... | ${framesize} | ${topology_type}
+| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
+| | Append To List | ${latency} | ${tmp}
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
| | ... | ${latency}
| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
| | ... | *Example:*
| | ...
| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \
-| | ... | \| (0, 10/10/10) \|
+| | ... | \| [100%NDR, [10/10/10, 1/2/3]] \|
| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams}
| | ... | ${latency}
| | ${framesize}= | Get Frame Size | ${framesize}
| | ... | append=yes
| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
| | ... | append=yes
-| | :FOR | ${idx} | ${lat} | IN ENUMERATE | @{latency}
-| | | Set Test Message | ${\n}LATENCY_STREAM_${idx}: ${lat} usec (min/avg/max)
-| | ... | append=yes
+| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes
+| | :FOR | ${lat} | IN | @{latency}
+| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes
| Display result of PDR search
| | [Documentation]
| | Set Test Message | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type}
| | ... | append=yes
+| Measure latency pps
+| | [Documentation]
+| | ... | Send traffic at specified rate. Measure min/avg/max latency
+| | ...
+| | ... | *Arguments:*
+| | ... | - duration - Duration of traffic run [s]. Type: integer
+| | ... | - rate - Rate for sending packets. Type: integer
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - topology_type - Topology type. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4
+| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
+| | Return From Keyword If | ${rate} <= 10000 | ${-1}
+| | Clear all counters on all DUTs
+| | Send traffic on tg | ${duration} | ${rate}pps | ${framesize}
+| | ... | ${topology_type} | warmup_time=0
+| | Show statistics on all DUTs
+| | Run keyword and return | Get latency
+
| Traffic should pass with no loss
| | [Documentation]
| | ... | Send traffic at specified rate. No packet loss is accepted at loss
| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
| | Add PCI device | ${dut1} | ${dut1_if1_pci} | ${dut1_if2_pci}
| | Add PCI device | ${dut2} | ${dut2_if1_pci} | ${dut2_if2_pci}
+
+| Guest VM with dpdk-testpmd connected via vhost-user is setup
+| | [Documentation]
+| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting
+| | ... | DPDK testpmd. Qemu Guest is using 3 cores pinned to physical cores 5,
+| | ... | 6, 7 and 2048M. Testpmd is using 3 cores (1 main core and 2 cores
+| | ... | dedicated to io) mem-channel=4, txq/rxq=256, burst=64,
+| | ... | disable-hw-vlan, disable-rss, driver usr/lib/librte_pmd_virtio.so
+| | ... | and fwd mode is io.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary
+| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string
+| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string
+| | ... | - vm_name - QemuUtil instance name. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Guest VM with dpdk-testpmd connected via vhost-user is setup \
+| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \|
+| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name}
+| | Import Library | resources.libraries.python.QemuUtils
+| | ... | WITH NAME | ${vm_name}
+| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1}
+| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
+| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
+| | Run keyword | ${vm_name}.Qemu Set Smp | 3 | 3 | 1 | 1
+| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
+| | Run keyword | ${vm_name}.Qemu Set Huge Allocate
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
+| | Run keyword | ${vm_name}.Qemu Set Affinity | 5 | 6 | 7
+| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x7
+| | ... | eal_mem_channels=4
+| | ... | pmd_fwd_mode=io
+| | ... | pmd_disable_hw_vlan=${True}
+| | ... | pmd_disable_rss=${True}
+| | Return From Keyword | ${vm}
+
+| Guest VM with dpdk-testpmd-mac connected via vhost-user is setup
+| | [Documentation]
+| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting
+| | ... | DPDK testpmd. Qemu Guest is using 3 cores pinned to physical cores 5,
+| | ... | 6, 7 and 2048M. Testpmd is using 3 cores (1 main core and 2 cores
+| | ... | dedicated to io) mem-channel=4, txq/rxq=256, burst=64,
+| | ... | disable-hw-vlan, disable-rss, driver usr/lib/librte_pmd_virtio.so
+| | ... | and fwd mode is mac rewrite.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary
+| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string
+| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string
+| | ... | - vm_name - QemuUtil instance name. Type: string
+| | ... | - eth0_mac - MAC address of first Vhost interface. Type: string
+| | ... | - eth1_mac - MAC address of second Vhost interface. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Guest VM with dpdk-testpmd for Vhost L2BD forwarding is setup \
+| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \
+| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \|
+| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name}
+| | ... | ${eth0_mac} | ${eth1_mac}
+| | Import Library | resources.libraries.python.QemuUtils
+| | ... | WITH NAME | ${vm_name}
+| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1}
+| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
+| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
+| | Run keyword | ${vm_name}.Qemu Set Smp | 3 | 3 | 1 | 1
+| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
+| | Run keyword | ${vm_name}.Qemu Set Huge Allocate
+| | Run keyword | ${vm_name}.Qemu Set Disk Image
+| | ... | /var/lib/vm/csit-nested-1.3.img
+| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
+| | Run keyword | ${vm_name}.Qemu Set Affinity | 5 | 6 | 7
+| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x7
+| | ... | eal_mem_channels=4
+| | ... | pmd_fwd_mode=mac
+| | ... | pmd_eth_peer_0=0,${eth0_mac}
+| | ... | pmd_eth_peer_1=1,${eth1_mac}
+| | ... | pmd_disable_hw_vlan=${True}
+| | ... | pmd_disable_rss=${True}
+| | Return From Keyword | ${vm}
+
+| Guest VM with Linux Bridge connected via vhost-user is setup
+| | [Documentation]
+| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting
+| | ... | linux bridge. Qemu Guest is using 3 cores pinned to physical cores 5,
+| | ... | 6, 7 and 2048M.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary
+| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string
+| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string
+| | ... | - vm_name - QemuUtil instance name. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Guest VM with Linux Bridge connected via vhost-user is setup \
+| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \|
+| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name}
+| | Import Library | resources.libraries.python.QemuUtils
+| | ... | WITH NAME | ${vm_name}
+| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1}
+| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
+| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
+| | Run keyword | ${vm_name}.Qemu Set Smp | 3 | 3 | 1 | 1
+| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
+| | Run keyword | ${vm_name}.Qemu Set Huge Allocate
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
+| | Run keyword | ${vm_name}.Qemu Set Affinity | 5 | 6 | 7
+| | ${br}= | Set Variable | br0
+| | ${vhost1}= | Get Vhost User If Name By Sock | ${vm} | ${sock1}
+| | ${vhost2}= | Get Vhost User If Name By Sock | ${vm} | ${sock2}
+| | Linux Add Bridge | ${vm} | ${br} | ${vhost1} | ${vhost2}
+| | Set Interface State | ${vm} | ${vhost1} | up | if_type=name
+| | Set Interface State | ${vm} | ${vhost2} | up | if_type=name
+| | Set Interface State | ${vm} | ${br} | up | if_type=name
+| | Return From Keyword | ${vm}
+
+| Guest VM with dpdk-testpmd Teardown
+| | [Documentation]
+| | ... | Stop all qemu processes with dpdk-testpmd running on ${dut_node}.
+| | ... | Argument is dictionary of all qemu nodes running with its names.
+| | ... | Dpdk-testpmd is stopped gracefully with printing stats.
+| | ... |
+| | ... | *Arguments:*
+| | ... | - dut_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut_vm_refs - VM references on node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Guest VM with dpdk-testpmd Teardown \| ${node['DUT1']} \
+| | ... | \| ${dut_vm_refs} \|
+| | ...
+| | [Arguments] | ${dut_node} | ${dut_vm_refs}
+| | :FOR | ${vm_name} | IN | @{dut_vm_refs}
+| | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name}
+| | | Dpdk Testpmd Stop | ${vm}
+| | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node}
+| | | Run Keyword | ${vm_name}.Qemu Kill
+| | | Run Keyword | ${vm_name}.Qemu Clear Socks
+
+| Guest VM Teardown
+| | [Documentation]
+| | ... | Stop all qemu processes running on ${dut_node}.
+| | ... | Argument is dictionary of all qemu nodes running with its names.
+| | ... |
+| | ... | *Arguments:*
+| | ... | - dut_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut_vm_refs - VM references on node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Guest VM Teardown \| ${node['DUT1']} \
+| | ... | \| ${dut_vm_refs} \|
+| | ...
+| | [Arguments] | ${dut_node} | ${dut_vm_refs}
+| | :FOR | ${vm_name} | IN | @{dut_vm_refs}
+| | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name}
+| | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node}
+| | | Run Keyword | ${vm_name}.Qemu Kill
+| | | Run Keyword | ${vm_name}.Qemu Clear Socks
+
+| Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \
+| | ... | Don`t set route.
+| | ...
+| | ... | *Arguments:*
+| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string
+| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string
+| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string
+| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string
+| | ... | -${duts_prefix} - ip prefix. Type: int
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ... | \| Lisp IPv4 forwarding initialized in a 3-node circular topology \
+| | ... | \| ${dut1_dut2_address} \| ${dut1_tg_address} \
+| | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \|
+| | ...
+| | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address}
+| | ... | ${dut2_dut1_address} | ${dut2_tg_address}
+| | ... | ${duts_prefix}
+| | Set Interface State | ${dut1} | ${dut1_if1} | up
+| | Set Interface State | ${dut1} | ${dut1_if2} | up
+| | Set Interface State | ${dut2} | ${dut2_if1} | up
+| | Set Interface State | ${dut2} | ${dut2_if2} | up
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
+| | dut1_v4.set_arp | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac}
+| | dut2_v4.set_arp | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac}
+| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
+| | dut1_v4.set_ip | ${dut1_if1} | ${dut1_tg_address} | ${duts_prefix}
+| | dut1_v4.set_ip | ${dut1_if2} | ${dut1_dut2_address} | ${duts_prefix}
+| | dut2_v4.set_ip | ${dut2_if1} | ${dut2_dut1_address} | ${duts_prefix}
+| | dut2_v4.set_ip | ${dut2_if2} | ${dut2_tg_address} | ${duts_prefix}
+| | All Vpp Interfaces Ready Wait | ${nodes}
+
+| Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | [Documentation] | Custom setup of IPv6 topology on all DUT nodes \
+| | ... | Don`t set route.
+| | ...
+| | ... | *Arguments:*
+| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string
+| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string
+| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string
+| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string
+| | ... | -${duts_prefix} - ip prefix. Type: int
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ... | \| Lisp IPv6 forwarding initialized in a 3-node circular topology \
+| | ... | \| ${dut1_dut2_address} \| ${dut1_tg_address} \
+| | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \|
+| | ...
+| | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address}
+| | ... | ${dut2_dut1_address} | ${dut2_tg_address}
+| | ... | ${prefix}
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_tg_address}
+| | ... | ${prefix}
+| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_dut2_address}
+| | ... | ${prefix}
+| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_dut1_address}
+| | ... | ${prefix}
+| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_tg_address}
+| | ... | ${prefix}
+| | Vpp nodes ra suppress link layer | ${nodes}
+| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2
+| | ... | ${tg1_if1_mac}
+| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2
+| | ... | ${tg1_if2_mac}
+| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_dut1_address}
+| | ... | ${dut2_if1_mac}
+| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_dut2_address}
+| | ... | ${dut1_if2_mac}
+
+| Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \
+| | ... | Don`t set route.
+| | ...
+| | ... | *Arguments:*
+| | ... | -${dut1_dut2_ip6_address} - IPv6 address from DUT1 to DUT2.
+| | ... | Type: string
+| | ... | -${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string
+| | ... | -${dut2_dut1_ip6_address} - IPv6 address from DUT2 to DUT1.
+| | ... | Type: string
+| | ... | -${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string
+| | ... | -${prefix4} - IPv4 prefix. Type: int
+| | ... | -${prefix6} - IPv6 prefix. Type: int
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ... | \| Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology \
+| | ... | \| ${dut1_dut2_ip6_address} \| ${dut1_tg_ip4_address} \
+| | ... | \| ${dut2_dut1_ip6_address} \| ${dut2_tg_ip4_address} \
+| | ... | \| ${prefix4} \| ${prefix6} \|
+| | ...
+| | [Arguments] | ${dut1_dut2_ip6_address} | ${dut1_tg_ip4_address}
+| | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address}
+| | ... | ${prefix4} | ${prefix6}
+| | Set Interface State | ${dut1} | ${dut1_if1} | up
+| | Set Interface State | ${dut1} | ${dut1_if2} | up
+| | Set Interface State | ${dut2} | ${dut2_if1} | up
+| | Set Interface State | ${dut2} | ${dut2_if2} | up
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | dut1_v4.set_ip | ${dut1_if1} | ${dut1_tg_ip4_address} | ${prefix4}
+| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip6_address}
+| | ... | ${prefix6}
+| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address}
+| | ... | ${prefix6}
+| | dut2_v4.set_ip | ${dut2_if2} | ${dut2_tg_ip4_address} | ${prefix4}
+| | Vpp nodes ra suppress link layer | ${nodes}
+| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
+| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
+| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address}
+| | ... | ${dut2_if1_mac}
+| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip6_address}
+| | ... | ${dut1_if2_mac}
+
+| Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \
+| | ... | Don`t set route.
+| | ...
+| | ... | *Arguments:*
+| | ... | -${dut1_dut2_ip4_address} - IPv4 address from DUT1 to DUT2.
+| | ... | Type: string
+| | ... | -${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string
+| | ... | -${dut2_dut1_ip4_address} - IPv4 address from DUT2 to DUT1.
+| | ... | Type: string
+| | ... | -${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string
+| | ... | -${prefix4} - IPv4 prefix. Type: int
+| | ... | -${prefix6} - IPv6 prefix. Type: int
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ... | \| Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology \
+| | ... | \| ${dut1_dut2_ip4_address} \| ${dut1_tg_ip6_address} \
+| | ... | \| ${dut2_dut1_ip4_address} \| ${dut2_tg_ip6_address} \
+| | ... | \| ${prefix6} \| ${prefix4} \|
+| | ...
+| | [Arguments] | ${dut1_dut2_ip4_address} | ${dut1_tg_ip6_address}
+| | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address}
+| | ... | ${prefix6} | ${prefix4}
+| | Set Interface State | ${dut1} | ${dut1_if1} | up
+| | Set Interface State | ${dut1} | ${dut1_if2} | up
+| | Set Interface State | ${dut2} | ${dut2_if1} | up
+| | Set Interface State | ${dut2} | ${dut2_if2} | up
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address}
+| | ... | ${prefix6}
+| | dut1_v4.set_ip | ${dut1_if2} | ${dut1_dut2_ip4_address} | ${prefix4}
+| | dut2_v4.set_ip | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4}
+| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address}
+| | ... | ${prefix6}
+| | Vpp nodes ra suppress link layer | ${nodes}
+| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac}
+| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac}
+| | dut1_v4.set_arp | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac}
+| | dut2_v4.set_arp | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac}
+
Code Review / csit.git / blobdiff