Clean: IPv6 keywords

[csit.git] / resources / libraries / robot / performance / performance_configuration.robot

diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index b78ede3..5c8313b 100644 (file)
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -147,214 +147,6 @@
 | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4}
 | | ... | interface=${dut2_if2}
 
-| Initialize IPv6 forwarding in circular topology
-| | [Documentation]
-| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
-| | ... | circular topology. Get the interface MAC addresses and setup neighbor
-| | ... | on all VPP interfaces. Setup IPv6 addresses with /64 prefix on DUT-TG
-| | ... | links. In case of 3-node topology setup IPv6 adresses with /64 prefix
-| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /64
-| | ... | and next hop of neighbour DUT interface IPv4 address.
-| | ...
-| | ... | *Arguments:*
-| | ... | - remote_host1_ip - IP address of remote host1 (Optional).
-| | ... | Type: string
-| | ... | - remote_host2_ip - IP address of remote host2 (Optional).
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv6 forwarding in circular topology \
-| | ... | \| 3ffe:5f::1 \| 3ffe:5f::2 \|
-| | ...
-| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE}
-| | ...
-| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Variable Should Exist | ${dut2}
-| | ...
-| | Set interfaces in path up
-| | ...
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | ${dut2_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${dut2_if1} | 2001:3::2 | ${dut1_if2_mac}
-| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2}
-| | ... | ELSE | Set Variable | ${dut1}
-| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${dut1_if2}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:2::2 | ${tg_if2_mac}
-| | ...
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:1::1 | 64
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:3::1 | 64
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 2001:3::2 | 64
-| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:2::1 | 64
-| | ...
-| | Suppress ICMPv6 router advertisement message | ${nodes}
-| | ...
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:3::2
-| | ... | interface=${dut1_if2}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | 64 | gateway=2001:3::1
-| | ... | interface=${dut2_if1}
-| | ...
-| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128
-| | ... | gateway=2001:1::2 | interface=${dut1_if1}
-| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 128
-| | ... | gateway=2001:2::2 | interface=${dut_if2}
-| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
-| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128
-| | ... | gateway=2001:3::2 | interface=${dut1_if2}
-| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
-| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 128
-| | ... | gateway=2001:3::1 | interface=${dut2_if1}
-
-| Initialize IPv6 forwarding with scaling in circular topology
-| | [Documentation]
-| | ... | Custom setup of IPv6 topology with scalability of ip routes on all
-| | ... | DUT nodes in 2-node / 3-node circular topology
-| | ...
-| | ... | *Arguments:*
-| | ... | - count - IP route count. Type: integer
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv6 forwarding with scaling in circular \
-| | ... | topology \| 100000 \|
-| | ...
-| | [Arguments] | ${count}
-| | ...
-| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Variable Should Exist | ${dut2}
-| | ...
-| | Set interfaces in path up
-| | ...
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | ${prefix}= | Set Variable | 64
-| | ${host_prefix}= | Set Variable | 128
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:3::1 | ${prefix}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if2} | 2001:4::1 | ${prefix}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address
-| | ... | ${dut2} | ${dut2_if1} | 2001:4::2 | ${prefix}
-| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2}
-| | ... | ELSE | Set Variable | ${dut1}
-| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${dut1_if2}
-| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:5::1 | ${prefix}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:3::2 | ${tg1_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add Ip Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2001:4::2 | ${dut2_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add Ip Neighbor
-| | ... | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:5::2 | ${tg1_if2_mac}
-| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | gateway=2001:3::2
-| | ... | interface=${dut1_if1} | count=${count}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix}
-| | ... | gateway=2001:4::2 | interface=${dut1_if2} | count=${count}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix}
-| | ... | gateway=2001:4::1 | interface=${dut2_if1} | count=${count}
-| | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | gateway=2001:5::2
-| | ... | interface=${dut_if2} | count=${count}
-
-| Initialize IPv6 forwarding with vhost in 2-node circular topology
-| | [Documentation]
-| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on \
-| | ... | VPP node. Set UP state of all VPP interfaces in path. Create \
-| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each \
-| | ... | Virtual interface to FIB table with Physical interface or Virtual \
-| | ... | interface on both nodes. Setup IPv6 addresses with /64 prefix on \
-| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with \
-| | ... | prefix /64 and next hop of neighbour IPv6 address. Setup neighbours \
-| | ... | on all VPP interfaces.
-| | ...
-| | ... | *Arguments:*
-| | ... | - nf_nodes - Number of guest VMs. Type: integer
-| | ...
-| | ... | *Note:*
-| | ... | Socket paths for VM are defined in following format:
-| | ... | - /var/run/vpp/sock-${VM_ID}-1
-| | ... | - /var/run/vpp/sock-${VM_ID}-2
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 forwarding with Vhost-User initialized in a 2-node circular\
-| | ... | topology \| 1 \|
-| | ...
-| | [Arguments] | ${nf_nodes}=${1}
-| | ...
-| | Suppress ICMPv6 router advertisement message | ${nodes}
-| | Set interfaces in path up
-| | ${prefix}= | Set Variable | 64
-| | ${fib_table_1}= | Set Variable | ${101}
-| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes}
-| | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True}
-| | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
-| | ... | ipv6=${True}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
-| | ... | ipv6=${True}
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:100::1
-| | ... | ${prefix}
-| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:200::1
-| | ... | ${prefix}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:100::2 | ${tg_if1_mac}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 2001:200::2 | ${tg_if2_mac}
-| | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=2001:100::2
-| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:200::2
-| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
-| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
-| | | ${fib_table_1}= | Evaluate | ${100}+${number}
-| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1}
-| | | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
-| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2
-| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up
-| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up
-| | | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True}
-| | | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True}
-| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1}
-| | | ... | ${fib_table_1} | ipv6=${True}
-| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2}
-| | | ... | ${fib_table_2} | ipv6=${True}
-| | | VPP Interface Set IP Address
-| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1:1::2 | 64
-| | | VPP Interface Set IP Address
-| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1:2::2 | 64
-| | | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=1:1::1
-| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1
-| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
-
 | Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
 | | [Documentation]
 | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
@@ -434,7 +226,7 @@
 | | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2
 | | ... | ${prefix}
 | | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
 | | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix}
 | | ... | gateway=2002:1::1 | interface=${dut1_if1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -466,7 +258,7 @@
 | | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix}
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
 | | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2
 | | | ${hexa_nr}= | Convert To Hex | ${number}
 | | | VPP Add IP Neighbor | ${dut1}
@@ -579,7 +371,7 @@
 | | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix}
 | | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2}
 | | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
@@ -1775,7 +1567,7 @@
 | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} | ${prefix}
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_address} | ${prefix}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac}
 | | VPP Add IP Neighbor
@@ -1823,7 +1615,7 @@
 | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} | ${prefix6}
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if2}
 | | ... | ${dut2_tg_ip4_address} | ${prefix4}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
 | | VPP Add IP Neighbor
@@ -1871,7 +1663,7 @@
 | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4}
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} | ${prefix6}
-| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac}
 | | VPP Add IP Neighbor