FIX: Memif API

[csit.git] / resources / libraries / robot / performance / performance_configuration.robot

diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index f8628d0..7304108 100644 (file)
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -129,9 +129,9 @@
 | | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']}
 | | | ... | ${${dut}_if2_vf0}
 | | | ${dut_eth_vf_if1}= | VPP Create AVF Interface | ${nodes['${dut}']}
-| | | ... | ${if1_pci}
+| | | ... | ${if1_pci} | ${rxq_count_int}
 | | | ${dut_eth_vf_if2}= | VPP Create AVF Interface | ${nodes['${dut}']}
-| | | ... | ${if2_pci}
+| | | ... | ${if2_pci} | ${rxq_count_int}
 | | | Set Test Variable | ${${dut}_if1} | ${dut_eth_vf_if1}
 | | | Set Test Variable | ${${dut}_if2} | ${dut_eth_vf_if2}
 | | Set interfaces in path up
@@ -172,8 +172,10 @@
 | | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_if1_ip4} | ${dut2_if1_mac}
 | | Add arp on dut | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac}
 | | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_if2_ip4} | ${dut1_if2_mac}
-| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | ${tg_if1_ip4} | ${dut1_if1}
-| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | ${tg_if2_ip4} | ${dut2_if2}
+| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | gateway=${tg_if1_ip4}
+| | ... | interface=${dut1_if1}
+| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4}
+| | ... | interface=${dut2_if2}
 
 | Initialize IPv4 forwarding in circular topology
 | | [Documentation]
@@ -221,9 +223,11 @@
 | | ... | 20.20.20.1 | 24
 | | ...
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
+| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2
+| | ... | interface=${dut1_if2}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
+| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1
+| | ... | interface=${dut2_if1}
 
 | Initialize IPv4 forwarding with scaling in circular topology
 | | [Documentation]
@@ -274,16 +278,16 @@
 | | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2
 | | ... | 30
 | | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30
-| | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | 1.1.1.1 | ${dut1_if1}
-| | ... | count=${count}
+| | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | gateway=1.1.1.1
+| | ... | interface=${dut1_if1} | count=${count}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | 2.2.2.2 | ${dut1_if2}
-| | ... | count=${count}
+| | ... | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | gateway=2.2.2.2
+| | ... | interface=${dut1_if2} | count=${count}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | 2.2.2.1 | ${dut2_if1}
-| | ... | count=${count}
-| | Vpp Route Add | ${dut} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut_if2}
-| | ... | count=${count}
+| | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | gateway=2.2.2.1
+| | ... | interface=${dut2_if1} | count=${count}
+| | Vpp Route Add | ${dut} | 20.0.0.0 | 32 | gateway=3.3.3.1
+| | ... | interface=${dut_if2} | count=${count}
 
 | Initialize IPv4 forwarding with vhost in 2-node circular topology
 | | [Documentation]
@@ -328,10 +332,10 @@
 | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
 | | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac}
 | | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${tg1_if2_mac}
-| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1}
-| | ... | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2}
-| | ... | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=1.1.1.1
+| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=2.2.2.2
+| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
 | | ${ip_base_start}= | Set Variable | ${4}
 | | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1
 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1
@@ -382,10 +386,10 @@
 | | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01
 | | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2}
 | | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02
-| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2
-| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2
-| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
+| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=${ip_net_vif1}.2
+| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
+| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=${ip_net_vif2}.2
+| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
 
 | Initialize IPv4 forwarding with vhost in 3-node circular topology
 | | [Documentation]
@@ -444,14 +448,14 @@
 | | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac}
 | | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac}
 | | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac}
-| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1}
-| | ... | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2}
-| | ... | vrf=${fib_table_2}
-| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 2.2.2.1 | ${dut2_if1}
-| | ... | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2}
-| | ... | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=1.1.1.1
+| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=2.2.2.2
+| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
+| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=2.2.2.1
+| | ... | interface=${dut2_if1} | vrf=${fib_table_1}
+| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | gateway=3.3.3.2
+| | ... | interface=${dut2_if2} | vrf=${fib_table_2}
 | | ${ip_base_start}= | Set Variable | ${4}
 | | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1
 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1
@@ -537,14 +541,14 @@
 | | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01
 | | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2}
 | | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02
-| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2
-| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2
-| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
-| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | ${ip_net_vif1}.2
-| | | ... | ${dut2-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2
-| | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2}
+| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=${ip_net_vif1}.2
+| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
+| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=${ip_net_vif2}.2
+| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
+| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | gateway=${ip_net_vif1}.2
+| | | ... | interface=${dut2-vhost-${number}-if1} | vrf=${fib_table_1}
+| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=${ip_net_vif2}.2
+| | | ... | interface=${dut2-vhost-${number}-if2} | vrf=${fib_table_2}
 
 | Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
 | | [Documentation]
@@ -623,14 +627,16 @@
 | | ... | Configure IP addresses on interfaces | ${dut2} | ${subif_index_2}
 | | ... | 2.2.2.2 | 30
 | | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30
-| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | 1.1.1.1 | ${dut1_if1}
+| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | gateway=1.1.1.1
+| | ... | interface=${dut1_if1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | 2.2.2.2
-| | ... | ${subif_index_1}
+| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | gateway=2.2.2.2
+| | ... | interface=${subif_index_1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | 30 | 2.2.2.1
-| | ... | ${subif_index_2}
-| | Vpp Route Add | ${dut} | ${tg_if2_net} | 30 | 3.3.3.1 | ${dut_if2}
+| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | 30 | gateway=2.2.2.1
+| | ... | interface=${subif_index_2}
+| | Vpp Route Add | ${dut} | ${tg_if2_net} | 30 | gateway=3.3.3.1
+| | ... | interface=${dut_if2}
 
 | Initialize IPv4 policer 2r3c-${t} in circular topology
 | | [Documentation]
@@ -712,8 +718,10 @@
 | | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac}
 | | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:3::2 | ${dut2_if1_mac}
 | | Add Ip Neighbor | ${dut2} | ${dut2_if1} | 2001:3::1 | ${dut1_if2_mac}
-| | Vpp Route Add | ${dut1} | 2001:2::0 | ${prefix} | 2001:3::2 | ${dut1_if2}
-| | Vpp Route Add | ${dut2} | 2001:1::0 | ${prefix} | 2001:3::1 | ${dut2_if1}
+| | Vpp Route Add | ${dut1} | 2001:2::0 | ${prefix} | gateway=2001:3::2
+| | ... | interface=${dut1_if2}
+| | Vpp Route Add | ${dut2} | 2001:1::0 | ${prefix} | gateway=2001:3::1
+| | ... | interface=${dut2_if1}
 
 | Initialize IPv6 forwarding with scaling in circular topology
 | | [Documentation]
@@ -765,15 +773,15 @@
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Add Ip Neighbor | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac}
 | | Add Ip Neighbor | ${dut} | ${dut_if2} | 2001:5::2 | ${tg1_if2_mac}
-| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | 2001:3::2
+| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | gateway=2001:3::2
 | | ... | interface=${dut1_if1} | count=${count}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix} | 2001:4::2
-| | ... | interface=${dut1_if2} | count=${count}
+| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix}
+| | ... | gateway=2001:4::2 | interface=${dut1_if2} | count=${count}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} | 2001:4::1
-| | ... | interface=${dut2_if1} | count=${count}
-| | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | 2001:5::2
+| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix}
+| | ... | gateway=2001:4::1 | interface=${dut2_if1} | count=${count}
+| | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | gateway=2001:5::2
 | | ... | interface=${dut_if2} | count=${count}
 
 | Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
@@ -856,16 +864,16 @@
 | | ... | ${prefix}
 | | VPP Set If IPv6 Addr | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix}
 | | Suppress ICMPv6 router advertisement message | ${nodes}
-| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} | 2002:1::1
-| | ... | interface=${dut1_if1}
+| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix}
+| | ... | gateway=2002:1::1 | interface=${dut1_if1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix} | 2002:2::2
-| | ... | interface=${subif_index_1}
+| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix}
+| | ... | gateway=2002:2::2 | interface=${subif_index_1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix} | 2002:2::1
-| | ... | interface=${subif_index_2}
-| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix} | 2002:3::1
-| | ... | interface=${dut_if2}
+| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix}
+| | ... | gateway=2002:2::1 | interface=${subif_index_2}
+| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix}
+| | ... | gateway=2002:3::1 | interface=${dut_if2}
 
 | Initialize IPv6 iAcl whitelist in 3-node circular topology
 | | [Documentation]
@@ -918,10 +926,10 @@
 | | ${sid2}= | Set Variable If
 | | ... | "${n}" == "1" | ${dut1_sid2}
 | | ... | "${n}" == "2" | ${dut1_sid2_1}
-| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | ${dut2_if1_ip6}
-| | ... | ${dut1_if2}
-| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | ${dut1_if2_ip6}
-| | ... | ${dut2_if1}
+| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | gateway=${dut2_if1_ip6}
+| | ... | interface=${dut1_if2}
+| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | gateway=${dut1_if2_ip6}
+| | ... | interface=${dut2_if1}
 # Configure SRv6 for direction0
 | | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1}
 | | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1"
@@ -942,7 +950,7 @@
 | | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2
 | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without"
 | | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix}
-| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2}
+| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2}
 # Configure SRv6 for direction1
 | | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2}
 | | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1"
@@ -963,7 +971,7 @@
 | | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2
 | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without"
 | | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix}
-| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1}
+| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1}
 | | Set interfaces in path up
 
 | Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology
@@ -983,8 +991,8 @@
 | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
 | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | ${sock1}= | Set Variable | memif-DUT1_CNF1
-| | ${sock2}= | Set Variable | memif-DUT2_CNF1
+| | ${sock1}= | Set Variable | memif-DUT1_CNF
+| | ${sock2}= | Set Variable | memif-DUT2_CNF
 | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1}
 | | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int}
 | | ... | ${rxq_count_int}
@@ -1023,14 +1031,14 @@
 | | ... | ${dut1-memif-1-if2_mac}
 | | Add Ip Neighbor | ${dut2} | ${dut2-memif-1-if1} | ${dut2_nh}
 | | ... | ${dut2-memif-1-if2_mac}
-| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} | ${dut2_if1_ip6}
-| | ... | ${dut1_if2}
+| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix}
+| | ... | gateway=${dut2_if1_ip6} | interface=${dut1_if2}
 | | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix}
-| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1}
-| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} | ${dut1_if2_ip6}
-| | ... | ${dut2_if1}
+| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1}
+| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix}
+| | ... | gateway=${dut1_if2_ip6} | interface=${dut2_if1}
 | | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix}
-| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2}
+| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2}
 # Configure SRv6 for direction0 on DUT1
 | | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1}
 | | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1}
@@ -1550,9 +1558,11 @@
 | | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30
 | | ...
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
+| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2
+| | ... | interface=${dut1_if2}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
+| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1
+| | ... | interface=${dut2_if1}
 | | ...
 | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
 
@@ -1686,7 +1696,8 @@
 | | ...
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: string
-| | ... | - vm_count - VM count. Type: integer
+| | ... | - nf_chain - NF chain. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
 | | ...
 | | ... | *Note:*
 | | ... | Socket paths for VM are defined in following format:
@@ -1696,47 +1707,72 @@
 | | ... | *Example:*
 | | ...
 | | ... | \| Initialize L2 bridge domains with Vhost-User on node \| DUT1 \
-| | ... | \| 1 \|
+| | ... | \| 1 \| 1 \|
 | | ...
-| | [Arguments] | ${dut} | ${vm_count}=${1}
+| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1}
 | | ...
-| | ${bd_id2}= | Evaluate | ${vm_count}+1
+| | ${bd_id2}= | Evaluate | ${nf_nodes}+1
 | | Add interface to bridge domain | ${nodes['${dut}']}
 | | ... | ${${dut}_if1} | ${1}
 | | Add interface to bridge domain | ${nodes['${dut}']}
 | | ... | ${${dut}_if2} | ${bd_id2}
-| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1
-| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1
-| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2
+| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1
+| | | ${qemu_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
+| | | ${sock1}= | Set Variable | /tmp/sock-${qemu_id}-1
+| | | ${sock2}= | Set Variable | /tmp/sock-${qemu_id}-2
 | | | Configure vhost interfaces for L2BD forwarding | ${nodes['${dut}']}
-| | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1
-| | | ... | ${dut}-vhost-${number}-if2
-| | | ${bd_id2}= | Evaluate | ${number}+1
+| | | ... | ${sock1} | ${sock2}
+| | | ... | ${dut}-vhost-${qemu_id}-if1
+| | | ... | ${dut}-vhost-${qemu_id}-if2
+| | | ${bd_id2}= | Evaluate | ${nf_node}+1
 | | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-vhost-${number}-if1} | ${number}
+| | | ... | ${${dut}-vhost-${qemu_id}-if1} | ${nf_node}
 | | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-vhost-${number}-if2} | ${bd_id2}
+| | | ... | ${${dut}-vhost-${qemu_id}-if2} | ${bd_id2}
 
 | Initialize L2 bridge domains with Vhost-User
 | | [Documentation]
-| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all
-| | ... | defined VPP nodes. Add each Vhost-User interface into L2 bridge
+| | ... | Create pairs of Vhost-User interfaces for defined number of VNF nodes
+| | ... | on all defined VPP nodes. Add each Vhost-User interface into L2 bridge
 | | ... | domains with learning enabled with physical inteface or Vhost-User
 | | ... | interface of another VM.
 | | ...
 | | ... | *Arguments:*
-| | ... | - vm_count - VM count. Type: integer
+| | ... | - nf_chain - NF chain. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
 | | ...
 | | ... | *Example:*
 | | ...
-| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \|
+| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| 1 \|
 | | ...
-| | [Arguments] | ${vm_count}=${1}
+| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1}
 | | ...
 | | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 bridge domains with Vhost-User on node | ${dut}
-| | | ... | vm_count=${vm_count}
+| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
+
+| Initialize L2 bridge domains for multiple chains with Vhost-User
+| | [Documentation]
+| | ... | Create pairs of Vhost-User interfaces for defined number of NF chains
+| | ... | with defined number of VNF nodes on all defined VPP nodes. Add each
+| | ... | Vhost-User interface into L2 bridge domains with learning enabled
+| | ... | with physical inteface or Vhost-User interface of another VM.
+| | ...
+| | ... | *Arguments:*
+| | ... | - nf_chains - Number of chains of NFs. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domains for multiple chains with Vhost-User \
+| | ... | \| 1 \| 1 \|
+| | ...
+| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1}
+| | ...
+| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
+| | | Initialize L2 bridge domains with Vhost-User | nf_chain=${nf_chain}
+| | | ... | nf_nodes=${nf_nodes}
 
 | Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology
 | | [Documentation]
@@ -1910,9 +1946,9 @@
 | | Add arp on dut | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac}
 | | Add arp on dut | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac}
 | | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask}
-| | ... | ${dut1_gw} | ${dut1_if1}
+| | ... | gateway=${dut1_gw} | interface=${dut1_if1}
 | | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask}
-| | ... | ${dut2_gw} | ${dut2_if2}
+| | ... | gateway=${dut2_gw} | interface=${dut2_if2}
 | | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2}
 | | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1}
 | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1}
@@ -2263,8 +2299,7 @@
 | | ... | - sock2 - Socket path for second Vhost-User interface.
 | | ... | Type: string
 | | ... | - vm_name - QemuUtil instance name. Type: string
-| | ... | - chains: Total number of chains. Type: integer
-| | ... | - nodeness: Total number of nodes per chain. Type: integer
+| | ... | - nf_cpus: List of allocated CPUs. Type: list
 | | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT
 | | ... | node. Type: integer
 | | ... | - jumbo - Set True if jumbo frames are used in the test.
@@ -2272,6 +2307,8 @@
 | | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int
 | | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP.
 | | ... | Type: bool
+| | ... | - auto_scale - Whether to use same amount of RXQs for vhost interface
+| | ... | in VM as vswitch, otherwise use single RXQ. Type: boolean
 | | ...
 | | ... | *Note:*
 | | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and
@@ -2280,17 +2317,17 @@
 | | ... | *Example:*
 | | ...
 | | ... | \| Configure guest VM with dpdk-testpmd connected via vhost-user \
-| | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \
-| | ... | \| qemu_id=${2} \|
+| | ... | \| ${nodes['DUT1']} \| /tmp/sock-1-1 \| /tmp/sock-1-2 \
+| | ... | \| DUT1_VM2 \| qemu_id=${2} \|
 | | ...
-| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${chains}=${1}
-| | ... | ${nodeness}=${1} | ${qemu_id}=${1} | ${jumbo}=${False}
-| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False}
+| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${nf_cpus}
+| | ... | ${qemu_id}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256}
+| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${True}
 | | ...
-| | ${nf_cpus}= | Create network function CPU list | ${dut}
-| | ... | chains=${chains} | nodeness=${nodeness} | chain_id=${1}
-| | ... | node_id=${qemu_id} | auto_scale=${True}
 | | ${nf_cpus_count}= | Get Length | ${nf_cpus}
+| | ${rxq}= | Run Keyword If | '${auto_scale}' == ${True}
+| | ... | Set Variable | ${rxq_count_int}
+| | ... | ELSE | Set Variable | ${1}
 | | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id}
 | | ... | WITH NAME | ${vm_name}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${nodes['${dut}']}
@@ -2319,14 +2356,12 @@
 | | Run keyword | ${vm_name}.Qemu Set Affinity | @{nf_cpus}
 | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy
 | | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9200 | ${EMPTY}
-| | ${testpmd_cpus}= | Evaluate | ${thr_count_int} + ${1}
 | | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0}
-| | ... | cpu_cnt=${testpmd_cpus}
+| | ... | cpu_cnt=${nf_cpus_count}
 | | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus}
 | | ... | eal_mem_channels=4 | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE}
 | | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz}
-| | ... | pmd_rxq=${rxq_count_int} | pmd_txq=${rxq_count_int}
-| | ... | pmd_max_pkt_len=${max_pkt_len}
+| | ... | pmd_rxq=${rxq} | pmd_txq=${rxq} | pmd_max_pkt_len=${max_pkt_len}
 | | Return From Keyword | ${vm}
 
 | Configure guest VMs with dpdk-testpmd connected via vhost-user on node
@@ -2353,12 +2388,15 @@
 | | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False}
 | | ...
 | | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1
+| | | ${nf_cpus}= | Create network function CPU list | ${dut}
+| | | ... | chains=${1} | nodeness=${vm_count} | chain_id=${1}
+| | | ... | node_id=${number} | auto_scale=${True}
 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1
 | | | ${sock2}= | Set Variable | /tmp/sock-${number}-2
 | | | ${vm}=
 | | | ... | Configure guest VM with dpdk-testpmd connected via vhost-user
 | | | ... | ${dut} | ${sock1} | ${sock2} | ${dut}_VM${number}
-| | | ... | nodeness=${vm_count} | qemu_id=${number} | jumbo=${jumbo}
+| | | ... | ${nf_cpus} | qemu_id=${number} | jumbo=${jumbo}
 | | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${use_tuned_cfs}
 | | | Set To Dictionary | ${${dut}_vm_refs} | ${dut}_VM${number} | ${vm}
 
@@ -2390,6 +2428,7 @@
 | | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo}
 | | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False}
 | | All VPP Interfaces Ready Wait | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual
 
 | Configure guest VM with dpdk-testpmd-mac connected via vhost-user
 | | [Documentation]
@@ -2405,8 +2444,7 @@
 | | ... | - vm_name - QemuUtil instance name. Type: string
 | | ... | - eth0_mac - MAC address of first Vhost interface. Type: string
 | | ... | - eth1_mac - MAC address of second Vhost interface. Type: string
-| | ... | - chains: Total number of chains. Type: integer
-| | ... | - nodeness: Total number of nodes per chain. Type: integer
+| | ... | - nf_cpus: List of allocated CPUs. Type: list
 | | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT
 | | ... | node. Type: integer
 | | ... | - jumbo - Set True if jumbo frames are used in the test.
@@ -2414,6 +2452,8 @@
 | | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int
 | | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP.
 | | ... | Type: bool
+| | ... | - auto_scale - Whether to use same amount of RXQs for vhost interface
+| | ... | in VM as vswitch, otherwise use single RXQ. Type: boolean
 | | ...
 | | ... | *Note:*
 | | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and
@@ -2426,14 +2466,14 @@
 | | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \|
 | | ...
 | | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name}
-| | ... | ${eth0_mac} | ${eth1_mac} | ${chains}=${1} | ${nodeness}=${1}
-| | ... | ${qemu_id}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256}
-| | ... | ${use_tuned_cfs}=${False}
+| | ... | ${eth0_mac} | ${eth1_mac} | ${nf_cpus} | ${qemu_id}=${1}
+| | ... | ${jumbo}=${False} | ${perf_qemu_qsz}=${256}
+| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${True}
 | | ...
-| | ${nf_cpus}= | Create network function CPU list | ${dut}
-| | ... | chains=${chains} | nodeness=${nodeness} | chain_id=${1}
-| | ... | node_id=${qemu_id} | auto_scale=${True}
 | | ${nf_cpus_count}= | Get Length | ${nf_cpus}
+| | ${rxq}= | Run Keyword If | '${auto_scale}' == ${True}
+| | ... | Set Variable | ${rxq_count_int}
+| | ... | ELSE | Set Variable | ${1}
 | | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id}
 | | ... | WITH NAME | ${vm_name}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${nodes['${dut}']}
@@ -2462,15 +2502,13 @@
 | | Run keyword | ${vm_name}.Qemu Set Affinity | @{nf_cpus}
 | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy
 | | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9200 | ${EMPTY}
-| | ${testpmd_cpus}= | Evaluate | ${thr_count_int} + ${1}
 | | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0}
-| | ... | cpu_cnt=${testpmd_cpus}
+| | ... | cpu_cnt=${nf_cpus_count}
 | | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus}
 | | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac}
 | | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE}
 | | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz}
-| | ... | pmd_rxq=${rxq_count_int} | pmd_txq=${rxq_count_int}
-| | ... | pmd_max_pkt_len=${max_pkt_len}
+| | ... | pmd_rxq=${rxq} | pmd_txq=${rxq} | pmd_max_pkt_len=${max_pkt_len}
 | | Return From Keyword | ${vm}
 
 | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node
@@ -2481,7 +2519,7 @@
 | | ...
 | | ... | *Arguments:*
 | | ... | - dut - DUT node to start guest VM on. Type: dictionary
-| | ... | - vm_count} - Number of guest VMs. Type: int
+| | ... | - vm_count - Number of guest VMs. Type: int
 | | ... | - jumbo - Jumbo frames are used (True) or are not used (False)
 | | ... | in the test. Type: boolean
 | | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int
@@ -2500,13 +2538,16 @@
 | | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False}
 | | ...
 | | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1
+| | | ${nf_cpus}= | Create network function CPU list | ${dut}
+| | | ... | chains=${1} | nodeness=${vm_count} | chain_id=${1}
+| | | ... | node_id=${number} | auto_scale=${True}
 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1
 | | | ${sock2}= | Set Variable | /tmp/sock-${number}-2
 | | | ${vm}=
 | | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user
 | | | ... | ${dut} | ${sock1} | ${sock2} | ${dut}_VM${number}
 | | | ... | ${${dut}-vhost-${number}-if1_mac}
-| | | ... | ${${dut}-vhost-${number}-if2_mac} | nodeness=${vm_count}
+| | | ... | ${${dut}-vhost-${number}-if2_mac} | nf_cpus=${nf_cpus}
 | | | ... | qemu_id=${number} | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz}
 | | | ... | use_tuned_cfs=${use_tuned_cfs}
 | | | Set To Dictionary | ${${dut}_vm_refs} | ${dut}_VM${number} | ${vm}
@@ -2539,6 +2580,134 @@
 | | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo}
 | | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False}
 | | All VPP Interfaces Ready Wait | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual
+
+| Configure chain of NFs with dpdk-testpmd-mac connected via vhost-user on node
+| | [Documentation]
+| | ... | Start 1 chain of 1..N QEMU guests (VNFs) with two vhost-user\
+| | ... | interfaces and interconnecting DPDK testpmd with fwd mode set to mac\
+| | ... | rewrite on VPP node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut - DUT node to start guest VM on. Type: dictionary
+| | ... | - nf_chains - Number of chains of NFs. Type: integer
+| | ... | - nf_chain - NF chain ID. Type: integer
+| | ... | - nf_nodes - Number of guest VMs. Type: integer
+| | ... | - jumbo - Jumbo frames are used (True) or are not used (False)
+| | ... | in the test. Type: boolean
+| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: integer
+| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP.
+| | ... | Type: boolean
+| | ... | - auto_scale - Whether to use same amount of RXQs for vhost interface
+| | ... | in VM as vswitch, otherwise use single RXQ. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure chain of NFs with dpdk-testpmd-mac connected via \
+| | ... | vhost-user on node \| DUT1 \| 1 \| 1 \| 1 \| False \| 256 \|
+| | ...
+| | [Arguments] | ${dut} | ${nf_chains}=${1} | ${nf_chain}=${1}
+| | ... | ${nf_nodes}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256}
+| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${False}
+| | ...
+| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes} + ${1}
+| | | ${nf_cpus}= | Create network function CPU list | ${dut}
+| | | ... | chains=${nf_chains} | nodeness=${nf_nodes} | chain_id=${nf_chain}
+| | | ... | node_id=${nf_node} | auto_scale=${False}
+| | | ${qemu_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
+| | | ${sock1}= | Set Variable | /tmp/sock-${qemu_id}-1
+| | | ${sock2}= | Set Variable | /tmp/sock-${qemu_id}-2
+| | | ${nf_name}= | Set Variable | ${dut}_VM${qemu_id}
+| | | ${prev_qemu_id}= | Evaluate | ${qemu_id} - ${1}
+| | | ${next_qemu_id}= | Evaluate | ${qemu_id} + ${1}
+| | | ${prev_qemu_id_hex}= | Convert To Hex | ${prev_qemu_id} | length=2
+| | | ... | lowercase=yes
+| | | ${next_qemu_id_hex}= | Convert To Hex | ${next_qemu_id} | length=2
+| | | ... | lowercase=yes
+| | | ${vif1_mac}= | Set Variable If | ${nf_node} == ${1}
+| | | ... | ${tg_if1_mac}
+| | | ... | 52:54:00:00:${prev_qemu_id_hex}:02
+| | | ${vif2_mac}= | Set Variable If | ${nf_node} == ${nf_nodes}
+| | | ... | ${tg_if2_mac}
+| | | ... | 52:54:00:00:${next_qemu_id_hex}:01
+| | | ${vm}=
+| | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user
+| | | ... | ${dut} | ${sock1} | ${sock2} | ${nf_name} | ${vif1_mac}
+| | | ... | ${vif2_mac} | ${nf_cpus} | qemu_id=${qemu_id} | jumbo=${jumbo}
+| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${use_tuned_cfs}
+| | | ... | auto_scale=${auto_scale}
+| | | Set To Dictionary | ${${dut}_vm_refs} | ${nf_name} | ${vm}
+
+| Configure chain of NFs with dpdk-testpmd-mac connected via vhost-user
+| | [Documentation]
+| | ... | Start 1 chain of 1..N QEMU guests (VNFs) with two vhost-user\
+| | ... | interfaces and interconnecting DPDK testpmd with fwd mode set to mac\
+| | ... | rewrite on all defined VPP nodes.
+| | ...
+| | ... | *Arguments:*
+| | ... | - nf_chains - Number of chains of NFs. Type: integer
+| | ... | - nf_chain - NF chain ID. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
+| | ... | - jumbo - Jumbo frames are used (True) or are not used (False)
+| | ... | in the test. Type: boolean
+| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: integer
+| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP.
+| | ... | Type: boolean
+| | ... | - auto_scale - Whether to use same amount of RXQs for vhost interface
+| | ... | in VM as vswitch, otherwise use single RXQ. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure chain of NFs with dpdk-testpmd-mac connected via\
+| | ... | vhost-user \| 1 \| 1 \| 1 \| False \| 256 \|
+| | ...
+| | [Arguments] | ${nf_chains}=${1} | ${nf_chain}=${1} | ${nf_nodes}=${1}
+| | ... | ${jumbo}=${False} | ${perf_qemu_qsz}=${256}
+| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${False}
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Configure chain of NFs with dpdk-testpmd-mac connected via vhost-user on node
+| | | ... | ${dut} | nf_chains=${nf_chains} | nf_chain=${nf_chain}
+| | | ... | nf_nodes=${nf_nodes} | jumbo=${jumbo}
+| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False}
+| | | ... | auto_scale=${auto_scale}
+
+| Configure chains of NFs with dpdk-testpmd-mac connected via vhost-user
+| | [Documentation]
+| | ... | Start 1..N chains of 1..N QEMU guests (VNFs) with two vhost-user\
+| | ... | interfaces and interconnecting DPDK testpmd with fwd mode set to mac\
+| | ... | rewrite on all defined VPP nodes.
+| | ...
+| | ... | *Arguments:*
+| | ... | - nf_chains - Number of chains of NFs. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
+| | ... | - jumbo - Jumbo frames are used (True) or are not used (False)
+| | ... | in the test. Type: boolean
+| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: integer
+| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP.
+| | ... | Type: boolean
+| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
+| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure chains of VMs with dpdk-testpmd-mac connected via \
+| | ... | vhost-user \| 1 \| 1 \| False \| 256 \|
+| | ...
+| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${jumbo}=${False}
+| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False}
+| | ... | ${auto_scale}=${False}
+| | ...
+| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
+| | | Configure chain of NFs with dpdk-testpmd-mac connected via vhost-user
+| | | ... | nf_chains=${nf_chains} | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
+| | | ... | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz}
+| | | ... | use_tuned_cfs=${False} | auto_scale=${auto_scale}
+| | All VPP Interfaces Ready Wait | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual
 
 | Initialize LISP IPv4 forwarding in 3-node circular topology
 | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \
@@ -2796,13 +2965,17 @@
 | | ... | Add arp on dut | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac}
 | | Add arp on dut | ${dut} | ${dut_if2} | 12.0.0.2 | ${tg_if2_mac}
 | | ...
-| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | 10.0.0.2 | ${dut1_if1}
+| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | gateway=10.0.0.2
+| | ... | interface=${dut1_if1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | 11.0.0.2 | ${dut1_if2}
+| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | gateway=11.0.0.2
+| | ... | interface=${dut1_if2}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | 12.0.0.2 | ${dut2_if2}
+| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | gateway=12.0.0.2
+| | ... | interface=${dut2_if2}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | 11.0.0.1 | ${dut2_if1}
+| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | gateway=11.0.0.1
+| | ... | interface=${dut2_if1}
 | | ...
 | | Configure inside and outside interfaces
 | | ... | ${dut1} | ${dut1_if1} | ${dut1_if2}
@@ -2834,8 +3007,8 @@
 | | [Arguments] | ${dut} | ${count}
 | | ...
 | | :FOR | ${number} | IN RANGE | 1 | ${count}+1
-| | | ${sock1}= | Set Variable | memif-${dut}_CNF1
-| | | ${sock2}= | Set Variable | memif-${dut}_CNF1
+| | | ${sock1}= | Set Variable | memif-${dut}_CNF
+| | | ${sock2}= | Set Variable | memif-${dut}_CNF
 | | | ${prev_index}= | Evaluate | ${number}-1
 | | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
 | | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1
@@ -2867,43 +3040,52 @@
 | | | Initialize L2 xconnect with memif pairs on DUT node | ${dut} | ${count}
 | | Set interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
 | Initialize L2 Bridge Domain with memif pairs on DUT node
 | | [Documentation]
 | | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface
-| | ... | to separate L2 bridge domain with one physical or virtual interface
+| | ... | to separate L2 bridge domain with one physical or memif interface
 | | ... | to create a chain accross DUT node.
 | | ...
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: dictionary
-| | ... | - count - Number of memif pairs (containers). Type: integer
+| | ... | - nf_chain - NF chain. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
+| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
+| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
 | | ...
 | | ... | *Note:*
 | | ... | Socket paths for Memif are defined in following format:
-| | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid}
+| | ... | - /tmp/memif-\${dut}_CNF\${nf_id}-\${sid}
 | | ...
 | | ... | *Example:*
 | | ...
 | | ... | \| Initialize L2 Bridge Domain with memif pairs on DUT node \
-| | ... | \| ${dut} \| ${1} \|
+| | ... | \| ${dut} \| 1 \| 1 \|
 | | ...
-| | [Arguments] | ${dut} | ${count}
+| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1}
+| | ... | ${auto_scale}=${True}
 | | ...
-| | ${bd_id2}= | Evaluate | ${count}+1
+| | ${rxq}= | Run Keyword If | '${auto_scale}' == ${True}
+| | ... | Set Variable | ${rxq_count_int}
+| | ... | ELSE | Set Variable | ${1}
+| | ${bd_id2}= | Evaluate | ${nf_nodes}+1
 | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
 | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2}
 | | ... | ${bd_id2}
-| | :FOR | ${number} | IN RANGE | 1 | ${count}+1
-| | | ${sock1}= | Set Variable | memif-${dut}_CNF1
-| | | ${sock2}= | Set Variable | memif-${dut}_CNF1
+| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1
+| | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
+| | | ${sock1}= | Set Variable | memif-${dut}_CNF
+| | | ${sock2}= | Set Variable | memif-${dut}_CNF
 | | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
-| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1
-| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int}
-| | | ${bd_id2}= | Evaluate | ${number}+1
+| | | ... | ${sock1} | ${sock2} | ${nf_id} | ${dut}-memif-${nf_id}-if1
+| | | ... | ${dut}-memif-${nf_id}-if2 | ${rxq} | ${rxq}
+| | | ${bd_id2}= | Evaluate | ${nf_node}+1
 | | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${number}-if1} | ${number}
+| | | ... | ${${dut}-memif-${nf_id}-if1} | ${nf_node}
 | | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${number}-if2} | ${bd_id2}
+| | | ... | ${${dut}-memif-${nf_id}-if2} | ${bd_id2}
 
 | Initialize L2 Bridge Domain with memif pairs
 | | [Documentation]
@@ -2912,20 +3094,120 @@
 | | ... | virtual interface to create a chain accross DUT node.
 | | ...
 | | ... | *Arguments:*
-| | ... | - count - Number of memif pairs (containers). Type: integer
+| | ... | - nf_chain - NF chain. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
+| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
+| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
 | | ...
 | | ... | *Example:*
 | | ...
-| | ... | \| Initialize L2 Bridge Domain with memif pairs \| ${1} \|
+| | ... | \| Initialize L2 Bridge Domain with memif pairs \| 1 \| 1 \|
 | | ...
-| | [Arguments] | ${count}=${1}
+| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
 | | ...
 | | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut}
-| | | ... | ${count}
+| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
+| | | ... | auto_scale=${auto_scale}
+
+| Initialize L2 Bridge Domain for multiple chains with memif pairs
+| | [Documentation]
+| | ... | Create pairs of Memif interfaces for defined number of NF chains
+| | ... | with defined number of NF nodes on all defined VPP nodes. Add each
+| | ... | Memif interface into L2 bridge domains with learning enabled
+| | ... | with physical inteface or Memif interface of another NF.
+| | ...
+| | ... | *Arguments:*
+| | ... | - nf_chains - Number of chains of NFs. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
+| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
+| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 Bridge Domain for multiple chains with memif pairs \
+| | ... | \| 1 \| 1 \|
+| | ...
+| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
+| | ...
+| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
+| | | Initialize L2 Bridge Domain with memif pairs | nf_chain=${nf_chain}
+| | | ... | nf_nodes=${nf_nodes} | auto_scale=${auto_scale}
+| | Set interfaces in path up
+| | Show Memif on all DUTs | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
+
+| Initialize L2 Bridge Domain for pipeline with memif pairs
+| | [Documentation]
+| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each
+| | ... | Memif interface to separate L2 bridge domain with one physical or
+| | ... | virtual interface to create a service pipeline on DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - nf_chain - NF pipe. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer
+| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
+| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 Bridge Domain for pipeline with memif pairs \
+| | ... | \| 1 \| 1 \|
+| | ...
+| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
+| | ...
+| | ${rxq}= | Run Keyword If | '${auto_scale}' == ${True}
+| | ... | Set Variable | ${rxq_count_int}
+| | ... | ELSE | Set Variable | ${1}
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
+| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2}
+| | | ${nf_id_frst}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${1}
+| | | ${nf_id_last}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${nf_nodes}
+| | | ${sid_frst}= | Evaluate | ${nf_id_frst} * ${2} - ${1}
+| | | ${sid_last}= | Evaluate | ${nf_id_last} * ${2}
+| | | Set up single memif interface on DUT node | ${nodes['${dut}']}
+| | | ... | memif-${dut}_CNF | mid=${nf_id_frst} | sid=${sid_frst}
+| | | ... | memif_if=${dut}-memif-${nf_id_frst}-if1
+| | | ... | rxq=${rxq} | txq=${rxq}
+| | | Set up single memif interface on DUT node | ${nodes['${dut}']}
+| | | ... | memif-${dut}_CNF | mid=${nf_id_last} | sid=${sid_last}
+| | | ... | memif_if=${dut}-memif-${nf_id_last}-if2
+| | | ... | rxq=${rxq} | txq=${rxq}
+| | | Add interface to bridge domain | ${nodes['${dut}']}
+| | | ... | ${${dut}-memif-${nf_id_frst}-if1} | ${1}
+| | | Add interface to bridge domain | ${nodes['${dut}']}
+| | | ... | ${${dut}-memif-${nf_id_last}-if2} | ${2}
+
+| Initialize L2 Bridge Domain for multiple pipelines with memif pairs
+| | [Documentation]
+| | ... | Create pairs of Memif interfaces for defined number of NF pipelines
+| | ... | with defined number of NF nodes on all defined VPP nodes. Add each
+| | ... | Memif interface into L2 bridge domains with learning enabled
+| | ... | with physical inteface or Memif interface of another NF.
+| | ...
+| | ... | *Arguments:*
+| | ... | - nf_chains - Number of pipelines of NFs. Type: integer
+| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer
+| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
+| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 Bridge Domain for multiple pipelines with memif \
+| | ... | pairs \| 1 \| 1 \|
+| | ...
+| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
+| | ...
+| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
+| | | Initialize L2 Bridge Domain for pipeline with memif pairs
+| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
+| | | ... | auto_scale=${auto_scale}
 | | Set interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
 | Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology
 | | [Documentation]
@@ -2966,8 +3248,8 @@
 | | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
 | | ...
 | | ${number}= | Set Variable | ${1}
-| | ${sock1}= | Set Variable | memif-DUT1_CNF1
-| | ${sock2}= | Set Variable | memif-DUT1_CNF1
+| | ${sock1}= | Set Variable | memif-DUT1_CNF
+| | ${sock2}= | Set Variable | memif-DUT1_CNF
 | | ${memif_if1_name}= | Set Variable | DUT1-memif-${number}-if1
 | | ${memif_if2_name}= | Set Variable | DUT1-memif-${number}-if2
 | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock2}
@@ -2978,9 +3260,9 @@
 | | Add interface to bridge domain | ${dut1} | ${${memif_if2_name}} | ${bd_id2}
 | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2}
 | | ${sock1}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | memif-DUT2_CNF1
+| | ... | Set Variable | memif-DUT2_CNF
 | | ${sock2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | memif-DUT2_CNF1
+| | ... | Set Variable | memif-DUT2_CNF
 | | ${memif_if1_name}= | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Set Variable | DUT2-memif-${number}-if1
 | | ${memif_if2_name}= | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -3002,6 +3284,7 @@
 | | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
 | | ...
 | | Show Memif on all DUTs | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
 | Initialize IPv4 routing with memif pairs on DUT node
 | | [Documentation]
@@ -3038,8 +3321,9 @@
 | | ${ip_base_if1}= | Evaluate | ${dut_index} + ${1}
 | | ${ip_net_if1}= | Set Variable
 | | ... | ${ip_base_if1}.${ip_base_if1}.${ip_base_if1}
-| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24 | vrf=${fib_table_1}
-| | ... | gateway=${ip_net_if1}.1 | interface=${${dut}_if1} | multipath=${TRUE}
+| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24
+| | ... | vrf=${fib_table_1} | gateway=${ip_net_if1}.1
+| | ... | interface=${${dut}_if1} | multipath=${TRUE}
 | | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if1}
 | | ... | ${fib_table_1}
 | | Configure IP addresses on interfaces | ${nodes['${dut}']} | ${${dut}_if1}
@@ -3060,8 +3344,9 @@
 | | ${ip_base_if2}= | Evaluate | ${ip_base_if1} + ${1}
 | | ${ip_net_if2}= | Set Variable
 | | ... | ${ip_base_if2}.${ip_base_if2}.${ip_base_if2}
-| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24 | vrf=${fib_table_2}
-| | ... | gateway=${ip_net_if2}.2 | interface=${${dut}_if2} | multipath=${TRUE}
+| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24
+| | ... | vrf=${fib_table_2} | gateway=${ip_net_if2}.2
+| | ... | interface=${${dut}_if2} | multipath=${TRUE}
 | | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if2}
 | | ... | ${fib_table_2}
 | | Configure IP addresses on interfaces | ${nodes['${dut}']} | ${${dut}_if2}
@@ -3080,8 +3365,8 @@
 | | ${fib_table_1}= | Evaluate | ${fib_table_1} - ${1}
 | | ${ip_base_start}= | Set Variable | ${31}
 | | :FOR | ${number} | IN RANGE | 1 | ${count+${1}}
-| | | ${sock1}= | Set Variable | memif-${dut}_CNF1
-| | | ${sock2}= | Set Variable | memif-${dut}_CNF1
+| | | ${sock1}= | Set Variable | memif-${dut}_CNF
+| | | ${sock2}= | Set Variable | memif-${dut}_CNF
 | | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
 | | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1
 | | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int}
@@ -3144,6 +3429,7 @@
 | | | Initialize IPv4 routing with memif pairs on DUT node | ${dut} | ${count}
 | | Set interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
 | Initialize L2 xconnect for single memif
 | | [Documentation]
@@ -3168,14 +3454,16 @@
 | | ...
 | | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
-| | | ${sock}= | Set Variable | memif-${dut}_CNF1
+| | | ${sock}= | Set Variable | memif-${dut}_CNF
+| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1}
 | | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock}
-| | | ... | ${number} | ${dut}-memif-${number}-if1 | ${rxq_count_int}
-| | | ... | ${rxq_count_int}
+| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1
+| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
 | | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1}
 | | | ... | ${${dut}-memif-${number}-if1}
 | | Set single interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
+| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
 | Initialize L2 Bridge Domain for single memif
 | | [Documentation]
@@ -3200,10 +3488,11 @@
 | | ...
 | | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
-| | | ${sock}= | Set Variable | memif-${dut}_CNF1
+| | | ${sock}= | Set Variable | memif-${dut}_CNF
+| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1}
 | | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock}
-| | | ... | ${number} | ${dut}-memif-${number}-if1 | ${rxq_count_int}
-| | | ... | ${rxq_count_int}
+| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1
+| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
 | | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1}
 | | | ... | ${number}
 | | | Add interface to bridge domain | ${nodes['${dut}']}