| Library | resources.libraries.python.VhostUser
| Library | resources.libraries.python.TrafficGenerator
| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
+| Library | resources.libraries.python.Classify
| Resource | resources/libraries/robot/shared/default.robot
| Resource | resources/libraries/robot/shared/interfaces.robot
| Resource | resources/libraries/robot/shared/counters.robot
| | ... | ${sock1} | ${sock2} | dut2_vhost_if1 | dut2_vhost_if2
| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_vhost_if1}
| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2_vhost_if2}
-| | All Vpp Interfaces Ready Wait | ${nodes}
| Initialize L2 xconnect with Vhost-User for '${nr}' in 3-node circular topology
| | [Documentation]
| | ... | ${sock1} | ${sock2}
| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1}
| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2}
-| | All Vpp Interfaces Ready Wait | ${nodes}
| Initialize L2 bridge domain in 3-node circular topology
| | [Documentation]
| | ... | that is created automatically with index 1. Learning is enabled.
| | ... | Interfaces are brought up.
| | ...
-| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2}
-| | Configure L2BD forwarding | ${dut2} | ${dut2_if1} | ${dut2_if2}
+| | ... | *Arguments:*
+| | ... | - bd_id - Bridge domain ID. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domain in 3-node circular topology \| 1 \|
+| | ...
+| | [Arguments] | ${bd_id}=${1}
+| | ...
+| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id}
+| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id}
+| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id}
+| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id}
| | All Vpp Interfaces Ready Wait | ${nodes}
| Configure IPv4 ACLs
| | ... | Configure ACL with required number of not-hitting permit ACEs plus two
| | ... | hitting ACEs for both traffic directions.
| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node. Type: dictionary
+| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string
+| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \
+| | ... | \| GigabitEthernet0/8/0 \|
+| | ...
| | ... | _NOTE:_ This KW uses following test case variables:
-| | ... | - ${src_ip_start} - Source IP address start. Type: string.
-| | ... | - ${dst_ip_start} - Destination IP address start. Type: string.
-| | ... | - ${ip_step} - IP address step. Type: string.
-| | ... | - ${sport_start} - Source port number start. Type: string.
-| | ... | - ${dport_start} - Destination port number start. Type: string.
-| | ... | - ${port_step} - Port number step. Type: string.
+| | ... | - ${src_ip_start} - Source IP address start. Type: string
+| | ... | - ${dst_ip_start} - Destination IP address start. Type: string
+| | ... | - ${ip_step} - IP address step. Type: string
+| | ... | - ${sport_start} - Source port number start. Type: string
+| | ... | - ${dport_start} - Destination port number start. Type: string
+| | ... | - ${port_step} - Port number step. Type: string
| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured.
| | ... | Type: integer
-| | ... | - ${acl_apply_type} - To what path aplly the ACL - input or output.
+| | ... | - ${acl_apply_type} - To what path apply the ACL - input or output.
| | ... | Type: string
| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect.
-| | ... | Type: stringe
+| | ... | Type: string
| | ... | - ${trex_stream1_subnet} - IP subnet used by T-Rex in direction 0->1.
| | ... | Type: string
| | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0.
| | ... | enabled. Interfaces are brought up. Apply required ACL rules to DUT1
| | ... | interfaces.
| | ...
+| | ... | *Arguments:*
+| | ... | _None_
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node \
+| | ... | circular topology \|
+| | ...
| | ... | _NOTE:_ This KW uses following test case variables:
| | ... | - ${dut1} - DUT1 node.
| | ... | - ${dut2} - DUT2 node.
| | All Vpp Interfaces Ready Wait | ${nodes}
| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
+| Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
+| | [Documentation]
+| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular
+| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP
+| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and
+| | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with
+| | ... | prefix /24 and next hops of neighbour DUT interface IPv4 address.
+| | ... | Apply required ACL rules to DUT1 interfaces.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ip_nr - Number of IPs to be used. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize IPv4 routing for '10' addresses with IPv4 ACLs on DUT1 \
+| | ... | in 3-node circular topology \|
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - ${dut1} - DUT1 node.
+| | ... | - ${dut2} - DUT2 node.
+| | ... | - ${dut1_if1} - DUT1 interface towards TG.
+| | ... | - ${dut1_if2} - DUT1 interface towards DUT2.
+| | ... | - ${dut2_if1} - DUT2 interface towards DUT1.
+| | ... | - ${dut2_if2} - DUT2 interface towards TG.
+| | ...
+| | Set Interface State | ${dut1} | ${dut1_if1} | up
+| | Set Interface State | ${dut1} | ${dut1_if2} | up
+| | Set Interface State | ${dut2} | ${dut2_if1} | up
+| | Set Interface State | ${dut2} | ${dut2_if2} | up
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2
+| | | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.${number}
+| | | ... | ${tg1_if1_mac}
+| | | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.${number}
+| | | ... | ${tg1_if2_mac}
+| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
+| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
+| | Configure IP addresses on interfaces
+| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24
+| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30
+| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30
+| | ... | ${dut2} | ${dut2_if2} | 20.20.20.1 | 24
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
+| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
+| | All Vpp Interfaces Ready Wait | ${nodes}
+| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
+
+| Configure MACIP ACLs
+| | [Documentation]
+| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs
+| | ... | plus two hitting ACEs for both traffic directions.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node. Type: dictionary
+| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string
+| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \
+| | ... | \| GigabitEthernet0/8/0 \|
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - ${tg_if1_mac} - MAC address of TG interface towards DUT1.
+| | ... | Type: string
+| | ... | - ${tg_if2_mac} - MAC address of TG interface towards DUT2.
+| | ... | Type: string
+| | ... | - ${src_ip_start} - Source IP address start. Type: string
+| | ... | - ${ip_step} - IP address step. Type: string
+| | ... | - ${src_mac_start} - Source MAC address start in format with colons.
+| | ... | Type: string
+| | ... | - ${src_mac_step} - Source MAC address step. Type: string
+| | ... | - ${src_mac_mask} - Source MAC address mask. 00:00:00:00:00:00 is a
+| | ... | wildcard mask. Type: string
+| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured.
+| | ... | Type: integer
+| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect.
+| | ... | Type: string
+| | ... | - ${trex_stream1_subnet} - IP subnet used by T-Rex in direction 0->1.
+| | ... | Type: string
+| | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0.
+| | ... | Type: string
+| | ... | - ${tg_mac_mask} - MAC address mask for traffic streams.
+| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string
+| | ...
+| | [Arguments] | ${dut} | ${dut_if1}=${None} | ${dut_if2}=${None}
+| | ${src_ip_int} = | Evaluate
+| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step
+| | ... | modules=ipaddress
+| | ${ip_limit} = | Set Variable | 255.255.255.255
+| | ${ip_limit_int} = | Evaluate
+| | ... | int(ipaddress.ip_address(unicode($ip_limit))) | modules=ipaddress
+| | ${src_mac_int} = | Evaluate
+| | ... | int($src_mac_start.replace(':', ''), 16) - $src_mac_step
+| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff
+| | ${mac_limit_int} = | Evaluate
+| | ... | int($mac_limit.replace(':', ''), 16)
+| | ${acl}= | Set Variable | ipv4 permit
+| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
+| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step
+| | | ${src_mac_int} = | Evaluate | $src_mac_int + $src_mac_step
+| | | ${ipv4_limit_reached}= | Set Variable If
+| | | ... | $src_ip_int > $ip_limit_int | ${True}
+| | | ${mac_limit_reached}= | Set Variable If
+| | | ... | $src_mac_int > $mac_limit_int | ${True}
+| | | Run Keyword If | $ipv4_limit_reached is True | Log
+| | | ... | Can't do more iterations - IPv4 address limit has been reached.
+| | | ... | WARN
+| | | Run Keyword If | $mac_limit_reached is True | Log
+| | | ... | Can't do more iterations - MAC address limit has been reached.
+| | | ... | WARN
+| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True
+| | | ... | Set Variable | ${ip_limit}
+| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int))
+| | | ... | modules=ipaddress
+| | | ${src_mac}= | Run Keyword If | $mac_limit_reached is True
+| | | ... | Set Variable | ${mac_limit}
+| | | ... | ELSE | Evaluate
+| | | ... | ':'.join(textwrap.wrap("{:012x}".format($src_mac_int), width=2))
+| | | ... | modules=textwrap
+| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32
+| | | ... | mac ${src_mac} | mask ${src_mac_mask},
+| | | Exit For Loop If
+| | | ... | $ipv4_limit_reached is True or $mac_limit_reached is True
+| | ${acl}= | Catenate | ${acl}
+| | ... | ipv4 ${acl_action} ip ${trex_stream1_subnet} mac ${tg_if1_mac}
+| | ... | mask ${tg_mac_mask},
+| | ... | ipv4 ${acl_action} ip ${trex_stream2_subnet} mac ${tg_if2_mac}
+| | ... | mask ${tg_mac_mask}
+| | Add Macip Acl Multi Entries | ${dut} | rules=${acl}
+| | ${acl_idx}= | Set Variable | 0
+| | Run Keyword If | $dut_if1 is not None
+| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if1} | add | ${acl_idx}
+| | Run Keyword If | $dut_if2 is not None
+| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx}
+
+| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | [Documentation]
+| | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge
+| | ... | domain that is created automatically with index 1. Learning is
+| | ... | enabled. Interfaces are brought up. Apply required MACIP ACL rules to
+| | ... | DUT1 interfaces.
+| | ...
+| | ... | *Arguments:*
+| | ... | _None_
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node \
+| | ... | circular topology \|
+| | ...
+| | ... | _NOTE 1:_ This KW uses following test case variables:
+| | ... | - ${tg} - TG node.
+| | ... | - ${dut1} - DUT1 node.
+| | ... | - ${dut2} - DUT2 node.
+| | ... | - ${tg_if1} - TG interface towards DUT1.
+| | ... | - ${tg_if2} - TG interface towards DUT2.
+| | ... | - ${dut1_if1} - DUT1 interface towards TG.
+| | ... | - ${dut1_if2} - DUT1 interface towards DUT2.
+| | ... | - ${dut2_if1} - DUT2 interface towards DUT1.
+| | ... | - ${dut2_if2} - DUT2 interface towards TG.
+| | ...
+| | ... | _NOTE 2:_ This KW sets following test case variables:
+| | ... | - ${tg_if1_mac} - MAC address of TG interface towards DUT1.
+| | ... | - ${tg_if2_mac} - MAC address of TG interface towards DUT2.
+| | ...
+| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2}
+| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2}
+| | All Vpp Interfaces Ready Wait | ${nodes}
+| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | Set Test Variable | ${tg_if1_mac}
+| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | Set Test Variable | ${tg_if2_mac}
+| | Configure MACIP ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
+
| Initialize L2 bridge domains with Vhost-User in 3-node circular topology
| | [Documentation]
| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each
| | Add interface to bridge domain | ${dut2} | ${dut2_vhost_if1} | ${bd_id1}
| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
| | Add interface to bridge domain | ${dut2} | ${dut2_vhost_if2} | ${bd_id2}
-| | All Vpp Interfaces Ready Wait | ${nodes}
| Initialize L2 bridge domains with Vhost-User for '${nr}' VMs in 3-node circular topology
| | [Documentation]
| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1}
| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2}
| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
-| | All Vpp Interfaces Ready Wait | ${nodes}
| Initialize L2 bridge domains with Vhost-User in 2-node circular topology
| | [Documentation]
| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1}
| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2}
| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2}
+
+| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology
+| | [Documentation]
+| | ... | Setup L2 bridge domain topology with learning enabled with VLAN
+| | ... | between DUTs by connecting physical and vlan interfaces on each DUT.
+| | ... | All interfaces are brought up.
+| | ...
+| | ... | *Arguments:*
+| | ... | - bd_id1 - Bridge domain ID. Type: integer
+| | ... | - bd_id2 - Bridge domain ID. Type: integer
+| | ... | - subid - ID of the sub-interface to be created. Type: string
+| | ... | - tag_rewrite - Method of tag rewrite. Type: string
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - ${dut1} - DUT1 node.
+| | ... | - ${dut2} - DUT2 node.
+| | ... | - ${dut1_if2} - DUT1 interface towards DUT2.
+| | ... | - ${dut2_if1} - DUT2 interface towards DUT1.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domains with VLAN dot1q sub-interfaces
+| | ... | in a 3-node circular topology \| 1 \| 2 \| 10 \| pop-1 \|
+| | ...
+| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
+| | ...
+| | Set interfaces in path in 3-node circular topology up
+| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
+| | Configure L2 tag rewrite method on interfaces
+| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
+| | ... | ${tag_rewrite}
+| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1}
+| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1}
+| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id2}
+| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
| | All Vpp Interfaces Ready Wait | ${nodes}
| Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology
| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1}
| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2}
| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
-| | All Vpp Interfaces Ready Wait | ${nodes}
| Add PCI devices to DUTs in 3-node single link topology
| | [Documentation]
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
| | ... | ${True}
-| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | apply_patch=${apply_patch}
+| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | force_install=${True} | apply_patch=${apply_patch}
| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin}
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number}
| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number}
| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2}
+| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
+| | | ... | ${True}
| Configure guest VM with dpdk-testpmd using SMT connected via vhost-user
| | [Documentation]
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
| | ... | ${True}
-| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | apply_patch=${apply_patch}
+| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | force_install=${True} | apply_patch=${apply_patch}
| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin}
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
| | ... | ${True}
-| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | apply_patch=${apply_patch}
+| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | force_install=${True} | apply_patch=${apply_patch}
| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin}
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus}
| | | ... | count=${vm_cpus} | qemu_id=${number}
| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2}
+| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
+| | | ... | ${True}
| Configure guest VM with dpdk-testpmd-mac using SMT connected via vhost-user
| | [Documentation]
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
| | ... | ${True}
-| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | apply_patch=${apply_patch}
+| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | force_install=${True} | apply_patch=${apply_patch}
| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin}
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${False}
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1}
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
-| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True}
+| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
+| | ... | ${True}
+| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | force_install=${True} | apply_patch=${apply_patch}
| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin}
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True}
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1}
| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
-| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True}
+| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
+| | ... | ${True}
+| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | force_install=${True} | apply_patch=${apply_patch}
| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin}
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address}
| | ... | ${dut1_if2_mac}
-| Initialize SNAT in 3-node circular topology
-| | [Documentation] | Initialization of 3-node topology with SNAT between DUTs:
+| Initialize NAT44 in 3-node circular topology
+| | [Documentation] | Initialization of 3-node topology with NAT44 between DUTs:
| | ... | - set interfaces up
| | ... | - set IP addresses
| | ... | - set ARP
| | ... | - create routes
-| | ... | - set SNAT - only on DUT1
+| | ... | - set NAT44 - only on DUT1
| | ...
| | Set Interface State | ${dut1} | ${dut1_if1} | up
| | Set Interface State | ${dut1} | ${dut1_if2} | up
| | ...
| | Configure inside and outside interfaces
| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2}
-| | Configure deterministic mode for SNAT
+| | Configure deterministic mode for NAT44
| | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30
| Initialize L2 xconnect for '${nr}' memif pairs in 3-node circular topology
| | Set Interface State | ${dut2} | ${dut2_if1} | up
| | Set Interface State | ${dut2} | ${dut2_if2} | up
| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1
-| | | ${sock1}= | Set Variable | /tmp/memif-${number}-1
-| | | ${sock2}= | Set Variable | /tmp/memif-${number}-2
+| | | ${sock1}= | Set Variable | /tmp/memif-DUT1_VNF${number}-1
+| | | ${sock2}= | Set Variable | /tmp/memif-DUT1_VNF${number}-2
| | | ${prev_index}= | Evaluate | ${number}-1
| | | Set up memif interfaces on DUT node | ${dut1}
| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1
| | | ... | ${dut1-memif-${prev_index}-if2}
| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1}
| | | ... | ${dut1-memif-${number}-if1}
+| | | ${sock1}= | Set Variable | /tmp/memif-DUT2_VNF${number}-1
+| | | ${sock2}= | Set Variable | /tmp/memif-DUT2_VNF${number}-2
| | | Set up memif interfaces on DUT node | ${dut2}
| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1
| | | ... | dut2-memif-${number}-if2
| | | ... | ${dut1} | ${dut1-memif-${number}-if2} | ${dut1_if2}
| | | Run Keyword If | ${number}==${nr} | Configure L2XC
| | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2}
+
+| Initialize L2 Bridge Domain for '${nr}' memif pairs in 3-node circular topology
+| | [Documentation]
+| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each
+| | ... | Memif interface to separate L2 bridge domain with one physical or
+| | ... | virtual interface to create a chain accross DUT node.
+| | ...
+| | ... | *Arguments:*
+| | ... | _None_
+| | ...
+| | ... | *Note:*
+| | ... | Socket paths for Memif are defined in following format:
+| | ... | - /tmp/memif-${number}-1
+| | ... | - /tmp/memif-${number}-2
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular\
+| | ... | topology \|
+| | ...
+| | ${bd_id2}= | Evaluate | ${nr}+1
+| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${1}
+| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2}
+| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${1}
+| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
+| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1
+| | | ${sock1}= | Set Variable | /tmp/memif-DUT1_VNF${number}-1
+| | | ${sock2}= | Set Variable | /tmp/memif-DUT1_VNF${number}-2
+| | | Set up memif interfaces on DUT node | ${dut1}
+| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1
+| | | ... | dut1-memif-${number}-if2
+| | | ${bd_id2}= | Evaluate | ${number}+1
+| | | Add interface to bridge domain | ${dut1}
+| | | ... | ${dut1-memif-${number}-if1} | ${number}
+| | | Add interface to bridge domain | ${dut1}
+| | | ... | ${dut1-memif-${number}-if2} | ${bd_id2}
+| | | ${sock1}= | Set Variable | /tmp/memif-DUT2_VNF${number}-1
+| | | ${sock2}= | Set Variable | /tmp/memif-DUT2_VNF${number}-2
+| | | Set up memif interfaces on DUT node | ${dut2}
+| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1
+| | | ... | dut2-memif-${number}-if2
+| | | Add interface to bridge domain | ${dut2}
+| | | ... | ${dut2-memif-${number}-if1} | ${number}
+| | | Add interface to bridge domain | ${dut2}
+| | | ... | ${dut2-memif-${number}-if2} | ${bd_id2}
Code Review / csit.git / blobdiff