| Library | resources.libraries.python.KubernetesUtils
| Library | resources.libraries.python.VhostUser
| Library | resources.libraries.python.TrafficGenerator
+| Library | resources.libraries.python.TrafficGenerator.OptimizedSearch
| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
| Library | resources.libraries.python.Trace
| Resource | resources/libraries/robot/shared/default.robot
| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
+| Find NDR and PDR intervals using optimized search
+| | [Documentation]
+| | ... | Find boundaries for RFC2544 compatible NDR and PDR values
+| | ... | using an optimized search algorithm.
+| | ... | Display results as formatted test message.
+| | ... | Fail if a resulting lower bound has too high loss fraction.
+| | ... | Proceed with Perform additional measurements based on NDRPDR result.
+| | ... | TODO: Should the trial duration of the additional
+| | ... | measurements be configurable?
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - minimum_transmit_rate - Lower limit of search [pps]. Type: float
+| | ... | - maximum_transmit_rate - Upper limit of search [pps]. Type: float
+| | ... | - packet_loss_ratio - Accepted loss during search. Type: float
+| | ... | - final_relative_width - Maximal width multiple of upper. Type: float
+| | ... | - final_trial_duration - Duration of final trials [s]. Type: float
+| | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float
+| | ... | - intermediate phases - Number of intermediate phases [1]. Type: int
+| | ... | - timeout - Fail if search duration is longer [s]. Type: float
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Find NDR and PDR intervals using optimized search \| \${64} \| \
+| | ... | 3-node-IPv4 \| \${100000} \| \${14880952} \| \${0.005} \| \${0.005} \
+| | ... | \| \${30.0} \| \${1.0} \| \${2} \| ${600.0}
+| | ...
+| | [Arguments] | ${frame_size} | ${topology_type} | ${minimum_transmit_rate}
+| | ... | ${maximum_transmit_rate} | ${packet_loss_ratio}=${0.005}
+| | ... | ${final_relative_width}=${0.005} | ${final_trial_duration}=${30.0}
+| | ... | ${initial_trial_duration}=${1.0}
+| | ... | ${number_of_intermediate_phases}=${2} | ${timeout}=${600.0}
+| | ...
+| | ${result}= | Perform optimized ndrpdr search | ${frame_size}
+| | ... | ${topology_type} | ${minimum_transmit_rate} | ${maximum_transmit_rate}
+| | ... | ${packet_loss_ratio} | ${final_relative_width}
+| | ... | ${final_trial_duration} | ${initial_trial_duration}
+| | ... | ${number_of_intermediate_phases} | timeout=${timeout}
+| | Display result of NDRPDR search | ${result} | ${frame_size}
+| | Check NDRPDR interval validity | ${result.pdr_interval}
+| | ... | ${packet_loss_ratio}
+| | Check NDRPDR interval validity | ${result.ndr_interval}
+| | Perform additional measurements based on NDRPDR result
+| | ... | ${result} | ${frame_size} | ${topology_type}
+
+| Display single bound
+| | [Documentation]
+| | ... | Display one bound of NDR+PDR search,
+| | ... | in packet per seconds (total and per stream)
+| | ... | and Gbps total bandwidth with untagged packet.
+| | ... | Througput is calculated as:
+| | ... | Measured rate per stream * Total number of streams
+| | ... | Bandwidth is calculated as:
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
+| | ... | The given result should contain latency data as well.
+| | ...
+| | ... | *Arguments:*
+| | ... | - text - Flavor text describing which bound is this. Type: string
+| | ... | - rate_total - Total (not per stream) measured Tr [pps]. Type: float
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - latency - Latency data to display if non-empty. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Display single bound \| NDR lower bound \| \${12345.67} \
+| | ... | \| \${64} \| show_latency=\${EMPTY}
+| | ...
+| | [Arguments] | ${text} | ${rate_total} | ${framesize} | ${latency}=${EMPTY}
+| | ...
+| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
+| | Set Test Message | ${\n}${text}: ${rate_total} pps, | append=yes
+| | Set Test Message | ${bandwidth_total} Gbps (untagged) | append=yes
+| | Return From Keyword If | not """${latency}"""
+| | Set Test Message | ${\n}LATENCY usec [min/avg/max] per stream: ${latency}
+| | ... | append=yes
+
+| Display result of NDRPDR search
+| | [Documentation]
+| | ... | Display result of NDR+PDR search, both quantities, both bounds,
+| | ... | in packet per seconds (total and per stream)
+| | ... | and Gbps total bandwidth with untagged packet.
+| | ... | Througput is calculated as:
+| | ... | Measured rate per stream * Total number of streams
+| | ... | Bandwidth is calculated as:
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
+| | ... | The given result should contain latency data as well.
+| | ...
+| | ... | *Arguments:*
+| | ... | - result - Measured result data per stream [pps]. Type: NdrPdrResult
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Display result of NDRPDR search \| \${result} \| \${64}
+| | ...
+| | [Arguments] | ${result} | ${framesize}
+| | ...
+| | ${framesize}= | Get Frame Size | ${framesize}
+| | Display single bound | NDR_LOWER
+| | ... | ${result.ndr_interval.measured_low.transmit_rate} | ${framesize}
+| | ... | ${result.ndr_interval.measured_low.latency}
+| | Display single bound | NDR_UPPER
+| | ... | ${result.ndr_interval.measured_high.transmit_rate} | ${framesize}
+| | Display single bound | PDR_LOWER
+| | ... | ${result.pdr_interval.measured_low.transmit_rate} | ${framesize}
+| | ... | ${result.pdr_interval.measured_low.latency}
+| | Display single bound | PDR_UPPER
+| | ... | ${result.pdr_interval.measured_high.transmit_rate} | ${framesize}
+
+| Check NDRPDR interval validity
+| | [Documentation]
+| | ... | Extract loss ratio of lower bound of the interval.
+| | ... | Fail if it does not reach the allowed value.
+| | ...
+| | ... | *Arguments:*
+| | ... | - interval - Measured interval. Type: ReceiveRateInterval
+| | ... | - packet_loss_ratio - Accepted loss (0.0 for NDR). Type: float
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Check NDRPDR interval validity \| \${result.pdr_interval} \
+| | ... | \| \${0.005}
+| | ...
+| | [Arguments] | ${interval} | ${packet_loss_ratio}=${0.0}
+| | ...
+| | ${lower_bound_lf}= | Set Variable | ${interval.measured_low.loss_fraction}
+| | Return From Keyword If | ${lower_bound_lf} <= ${packet_loss_ratio}
+| | ${messagge}= | Catenate | SEPARATOR=${SPACE}
+| | ... | Lower bound fraction ${lower_bound_lf}
+| | ... | does not reach ${packet_loss_ratio}.
+| | Fail | ${message}
+
+| Perform additional measurements based on NDRPDR result
+| | [Documentation]
+| | ... | Perform any additional measurements which are not directly needed
+| | ... | for determining NDR nor PDR, but which are needed for gathering
+| | ... | additional data for debug purposes.
+| | ... | Currently, just "Traffic should pass with no loss" is called.
+| | ... | TODO: Move latency measurements from optimized search here.
+| | ...
+| | ... | *Arguments:*
+| | ... | - result - Measured result data per stream [pps]. Type: NdrPdrResult
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - topology_type - Topology type. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Perform additional measurements based on NDRPDR result \
+| | ... | \| \${result} \| ${64} \| 3-node-IPv4
+| | ...
+| | [Arguments] | ${result} | ${framesize} | ${topology_type}
+| | ...
+| | ${duration}= | Set Variable | 5.0
+| | ${rate_per_stream}= | Evaluate
+| | ... | ${result.ndr_interval.measured_low.target_tr} / 2.0
+| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
+| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
+
| Display result of NDR search
| | [Documentation]
| | ... | Display result of NDR search in packet per seconds (total and per
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \
+| | ... | \| Traffic should pass with maximum rate \| 10 \| 4.0mpps \| 64 \
| | ... | \| 3-node-IPv4 \|
| | ...
| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
+| | ... | ${fail_no_traffic}=${True}
| | ...
| | ${results}= | Send traffic at specified rate | ${duration} | ${rate}
| | ... | ${framesize} | ${topology_type}
| | Display raw results | ${framesize} | ${results}
+| | Run Keyword If | ${fail_no_traffic} | Fail if no traffic forwarded
| Send traffic at specified rate
| | [Documentation]
| | ... | ${topology_type} | warmup_time=0
| | Run Keyword If | ${dut_stats}==${True} | Show statistics on all DUTs | ${nodes}
| | Run Keyword If | ${dut_stats}==${True} and ${pkt_trace}==${True}
-| | ... | Show Packet Trace On All Duts | ${nodes}
+| | ... | Show Packet Trace On All Duts | ${nodes} | maximum=${100}
| | Return From Keyword | ${results}
| Clear and show runtime counters with running traffic
Code Review / csit.git / blobdiff