-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Variables | resources/libraries/python/topology.py
| Variables | resources/libraries/python/PapiHistory.py
| Variables | resources/libraries/python/Constants.py
-| ...
+|
| Library | Collections
| Library | OperatingSystem
| Library | String
-| ...
-| Library | resources.libraries.python.CoreDumpUtil
+|
+| Library | resources.libraries.python.Adl
+| Library | resources.libraries.python.Classify
| Library | resources.libraries.python.CpuUtils
+| Library | resources.libraries.python.CoreDumpUtil
| Library | resources.libraries.python.DUTSetup
+| Library | resources.libraries.python.FlowUtil
| Library | resources.libraries.python.L2Util
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.IrqUtil
+| Library | resources.libraries.python.model.export_json
+| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.Namespaces
+| Library | resources.libraries.python.PapiHistory
| Library | resources.libraries.python.SchedUtils
| Library | resources.libraries.python.Tap
+| Library | resources.libraries.python.Tap.TapFeatureMask
+| Library | resources.libraries.python.TestConfig
| Library | resources.libraries.python.TGSetup
-| Library | resources.libraries.python.PapiHistory
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.VhostUser.VirtioFeatureMask
| Library | resources.libraries.python.VppCounters
| Library | resources.libraries.python.VPPUtil
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.topology.Topology
-| ...
+|
+| Resource | resources/libraries/robot/lb/load_balancer.robot
| Resource | resources/libraries/robot/crypto/ipsec.robot
-| Resource | resources/libraries/robot/performance/performance_configuration.robot
-| Resource | resources/libraries/robot/performance/performance_limits.robot
+| Resource | resources/libraries/robot/features/acl.robot
+| Resource | resources/libraries/robot/features/policer.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/ip/nat.robot
+| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
+| Resource | resources/libraries/robot/l2/l2_patch.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Resource | resources/libraries/robot/l2/tagging.robot
+| Resource | resources/libraries/robot/overlay/srv6.robot
+| Resource | resources/libraries/robot/overlay/lisp.robot
+| Resource | resources/libraries/robot/overlay/lispgpe.robot
+| Resource | resources/libraries/robot/overlay/lisp_api.robot
| Resource | resources/libraries/robot/performance/performance_utils.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
| Resource | resources/libraries/robot/shared/container.robot
-| Resource | resources/libraries/robot/shared/qemu.robot
+| Resource | resources/libraries/robot/shared/memif.robot
| Resource | resources/libraries/robot/shared/suite_teardown.robot
| Resource | resources/libraries/robot/shared/suite_setup.robot
| Resource | resources/libraries/robot/shared/test_teardown.robot
| Resource | resources/libraries/robot/shared/test_setup.robot
| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/shared/vm.robot
-*** Keywords ***
-| Show Vpp Errors On All DUTs
-| | [Documentation] | Show VPP errors verbose on all DUTs.
-| | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
-| | | Vpp Show Errors | ${nodes['${dut}']}
+*** Variables ***
+| ${cpu_alloc_str}= | ${0}
+| ${page_size}= | ${DEFAULT_HUGEPAGE_SIZE}
-| Show Bridge Domain Data On All DUTs
-| | [Documentation] | Show Bridge Domain data on all DUTs.
-| | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
-| | | Vpp Get Bridge Domain Data | ${nodes['${dut}']}
+*** Keywords ***
+| Call Resetter
+| | [Documentation]
+| | ... | Check for a presence of test variable \${resetter}.
+| | ... | If it exists (and not None), call the resetter (as a Python callable).
+| | ... | This is usually used to reset any state on DUT before next trial.
+| |
+| | ... | TODO: Move to a more specific library if needed.
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Call Resetter \|
+| |
+| | ${resetter} = | Get Resetter
+| | # See http://robotframework.org/robotframework/3.1.2/libraries/BuiltIn.html
+| | # #Evaluating%20expressions for $variable (without braces) syntax.
+| | # Parens are there to perform the call.
+| | Run Keyword If | $resetter | Evaluate | $resetter()
| Configure crypto device on all DUTs
| | [Documentation] | Verify if Crypto QAT device virtual functions are
| | ... | initialized on all DUTs. If parameter force_init is set to True, then
| | ... | try to initialize/disable.
-| | ...
+| |
| | ... | *Arguments:*
-| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx.
-| | ... | Type: string, default value: HW_DH895xcc
-| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs
-| | ... | Type: integer, default value: ${32}
+| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx; default
+| | ... | value: HW_DH895xcc. Type: string
+| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs; default
+| | ... | value: ${32} Type: integer
| | ... | - force_init - Force to initialize. Type: boolean
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Configure crypto device on all DUTs \| HW_DH895xcc \| ${32} \|
-| | ...
+| |
| | [Arguments] | ${crypto_type} | ${numvfs} | ${force_init}=${False}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
| | | Crypto Device Verify | ${nodes['${dut}']} | ${crypto_type}
| | | ... | ${numvfs} | force_init=${force_init}
+| | END
| Configure kernel module on all DUTs
| | [Documentation] | Verify if specific kernel module is loaded on all DUTs.
| | ... | If parameter force_load is set to True, then try to load.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - module - Module to verify. Type: string
| | ... | - force_load - Try to load module. Type: boolean
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Configure kernel module on all DUTs \| ${True} \|
-| | ...
+| |
| | [Arguments] | ${module} | ${force_load}=${False}
-| | ...
+| |
| | Verify Kernel Module on All DUTs | ${nodes} | ${module}
| | ... | force_load=${force_load}
+| Get Keyname for DUT
+| | [Documentation]
+| | ... | Get the Keyname for the DUT in the keyname list.
+| | ... | Returns lowercase keyname value.
+| |
+| | ... | *Arguments:*
+| | ... | - dutx - DUT to find keyname. Type: dict
+| | ... | - dut_keys - DUT Keynames to search. Type: list
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Get Keyname for DUT \| ${dutx} \| ${duts} \|
+| |
+| | [Arguments] | ${dutx} | ${dut_keys}
+| |
+| | FOR | ${key} | IN | @{dut_keys}
+| | | ${found_key} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Dictionaries Should Be Equal | ${nodes['${key}']} | ${dutx}
+| | | Run Keyword If | '${found_key}' == 'PASS' | EXIT FOR LOOP
+| | END
+| | Run Keyword If | '${found_key}' != 'PASS'
+| | ... | Fail | Keyname for ${dutx} not found
+| | ${keyname}= | Convert To Lowercase | ${key}
+| | Return From Keyword | ${keyname}
+
| Create base startup configuration of VPP on all DUTs
| | [Documentation] | Create base startup configuration of VPP to all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
| | | Import Library | resources.libraries.python.VppConfigGenerator
| | | ... | WITH NAME | ${dut}
-| | | Run keyword | ${dut}.Set Node | ${nodes['${dut}']}
-| | | Run keyword | ${dut}.Add Unix Log
-| | | Run keyword | ${dut}.Add Unix CLI Listen
-| | | Run keyword | ${dut}.Add Unix Nodaemon
-| | | Run keyword | ${dut}.Add Unix Coredump
-| | | Run keyword | ${dut}.Add DPDK No Tx Checksum Offload
-| | | Run keyword | ${dut}.Add DPDK Log Level | debug
-| | | Run keyword | ${dut}.Add DPDK Uio Driver
-| | | Run keyword | ${dut}.Add Heapsize | 4G
-| | | Run keyword | ${dut}.Add Statseg size | 4G
-| | | Run keyword | ${dut}.Add Statseg Per Node Counters | on
-| | | Run keyword | ${dut}.Add Plugin | disable | default
-| | | Run keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
-| | | Run keyword | ${dut}.Add IP6 Hash Buckets | 2000000
-| | | Run keyword | ${dut}.Add IP6 Heap Size | 4G
-| | | Run keyword | ${dut}.Add IP Heap Size | 4G
+| | | Run Keyword | ${dut}.Set Node | ${nodes['${dut}']} | node_key=${dut}
+| | | Run Keyword | ${dut}.Add Unix Log
+| | | Run Keyword | ${dut}.Add Unix CLI Listen
+| | | Run Keyword | ${dut}.Add Unix CLI No Pager
+| | | Run Keyword | ${dut}.Add Unix Nodaemon
+| | | Run Keyword | ${dut}.Add Unix Coredump
+| | | Run Keyword | ${dut}.Add Socksvr | ${SOCKSVR_PATH}
+| | | Run Keyword | ${dut}.Add Main Heap Size | ${${heap_size_mult}*${2}}G
+| | | Run Keyword | ${dut}.Add Main Heap Page Size | ${page_size}
+| | | Run Keyword | ${dut}.Add Default Hugepage Size | ${page_size}
+| | | Run Keyword | ${dut}.Add Statseg Size | 2G
+| | | Run Keyword | ${dut}.Add Statseg Page Size | ${page_size}
+| | | Run Keyword | ${dut}.Add Statseg Per Node Counters | on
+| | | Run Keyword | ${dut}.Add Plugin | disable | default
+| | | Run Keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
+| | | Run Keyword | ${dut}.Add IP6 Hash Buckets | 2000000
+| | | Run Keyword | ${dut}.Add IP6 Heap Size | 4G
+| | | Run Keyword | ${dut}.Add Graph Node Variant | ${GRAPH_NODE_VARIANT}
+| | END
-| Add worker threads and rxqueues to all DUTs
-| | [Documentation] | Setup worker threads and rxqueues in vpp startup
-| | ... | configuration on all DUTs. Based on the SMT configuration of DUT if
-| | ... | enabled keyword will automatically map also the sibling logical cores.
+| Add worker threads to all DUTs
+| | [Documentation] | Setup worker threads in vpp startup configuration on all
+| | ... | DUTs. Based on the SMT configuration of DUT if enabled keyword will
+| | ... | automatically map also the sibling logical cores.
| | ... | Keyword will automatically set the appropriate test TAGs in format
| | ... | mTnC, where m=logical_core_count and n=physical_core_count.
-| | ...
+| | ... | User can manually override RXQ, RXD, TXD parameters if needed.
+| |
| | ... | *Arguments:*
| | ... | - phy_cores - Number of physical cores to use. Type: integer
| | ... | - rx_queues - Number of RX queues. Type: integer
-| | ...
+| | ... | - rxd - Number of RX descriptors. Type: integer
+| | ... | - txd - Number of TX descriptors. Type: integer
+| |
| | ... | *Example:*
-| | ...
-| | ... | \| Add worker threads and rxqueues to all DUTs \| ${1} \| ${1} \|
-| | ...
-| | [Arguments] | ${phy_cores} | ${rx_queues}=${None}
-| | ...
-| | ${cpu_count_int} | Convert to Integer | ${phy_cores}
-| | ${thr_count_int} | Convert to Integer | ${phy_cores}
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | @{if_list}= | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Create List | ${${dut}_if1}
-| | | ... | ELSE | Create List | ${${dut}_if1_1} | ${${dut}_if1_2}
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Append To List | ${if_list} | ${${dut}_if2}
-| | | ... | ELSE
-| | | ... | Append To List | ${if_list} | ${${dut}_if2_1} | ${${dut}_if2_2}
-| | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']} | @{if_list}
-| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
-| | | ${skip_cnt}= | Set variable | ${CPU_CNT_SYSTEM}
-| | | ${cpu_main}= | Cpu list per node str | ${nodes['${dut}']} | ${numa}
-| | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${CPU_CNT_MAIN}
-| | | ${skip_cnt}= | Evaluate | ${CPU_CNT_SYSTEM} + ${CPU_CNT_MAIN}
-| | | ${cpu_wt}= | Run keyword if | ${cpu_count_int} > 0 |
-| | | ... | Cpu list per node str | ${nodes['${dut}']} | ${numa}
-| | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${cpu_count_int}
-| | | ... | smt_used=${smt_used}
-| | | ${thr_count_int}= | Run keyword if | ${smt_used}
-| | | ... | Evaluate | int(${cpu_count_int}*2)
-| | | ... | ELSE | Set variable | ${thr_count_int}
-| | | ${rxq_count_int}= | Run keyword if | ${rx_queues}
-| | | ... | Set variable | ${rx_queues}
-| | | ... | ELSE | Evaluate | int(${thr_count_int}/2)
-| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
-| | | ... | Set variable | ${1}
-| | | ... | ELSE | Set variable | ${rxq_count_int}
-| | | Run keyword if | ${cpu_count_int} > 0
-| | | ... | ${dut}.Add CPU Main Core | ${cpu_main}
-| | | Run keyword if | ${cpu_count_int} > 0
+| |
+| | ... | \| Add worker threads to all DUTs \| ${1} \| ${1} \|
+| |
+| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${rxd}=${None}
+| | ... | ${txd}=${None}
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | &{compute_resource_info}= | Get Affinity Vswitch
+| | | ... | ${nodes} | ${dut} | ${phy_cores} | rx_queues=${rx_queues}
+| | | ... | rxd=${rxd} | txd=${txd}
+| | | Set Test Variable | &{compute_resource_info}
+| | | Create compute resources variables
+| | | Run Keyword | ${dut}.Add CPU Main Core | ${cpu_main}
+| | | Run Keyword If | ${cpu_count_int} > 0
| | | ... | ${dut}.Add CPU Corelist Workers | ${cpu_wt}
-| | | Run keyword
-| | | ... | ${dut}.Add DPDK Dev Default RXQ | ${rxq_count_int}
-# For now there is no way to easily predict the number of buffers. Statically
-# doing maximum amount of buffers allowed by DPDK.
-| | | Run keyword if | ${smt_used}
-| | | ... | Run keyword | ${dut}.Add Buffers Per Numa | ${215040} | ELSE
-| | | ... | Run keyword | ${dut}.Add Buffers Per Numa | ${107520}
-| | | Run keyword if | ${thr_count_int} > 1
-| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
-| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
-| | Set Test Variable | ${smt_used}
-| | Set Test Variable | ${thr_count_int}
-| | Set Test Variable | ${cpu_count_int}
-| | Set Test Variable | ${rxq_count_int}
-
-| Create Kubernetes VSWITCH startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${jumbo} - Jumbo packet. Type: boolean
-| | ... | - ${phy_cores} - Physical cores. Type: integer
-| | ... | - ${rxq} - RX queues. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${True} \
-| | ... | \| ${1} \| ${1}
-| | ...
-| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo}=${False}
-| | ...
-| | ${cpu_count_int} | Convert to Integer | ${phy_cores}
-| | ${thr_count_int} | Convert to Integer | ${phy_cores}
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']}
-| | | ... | ${${dut}_if1} | ${${dut}_if2}
-| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
-| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2}
-| | | ${thr_count_int}= | Run keyword if | ${smt_used}
-| | | ... | Evaluate | int(${cpu_count_int}*2)
-| | | ... | ELSE | Set variable | ${thr_count_int}
-| | | ${rxq_count_int}= | Run keyword if | ${rx_queues}
-| | | ... | Set variable | ${rx_queues}
-| | | ... | ELSE | Evaluate | int(${thr_count_int}/2)
-| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
-| | | ... | Set variable | ${1}
-| | | ... | ELSE | Set variable | ${rxq_count_int}
-| | | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | | ... | node=${nodes['${dut}']} | phy_cores=${phy_cores}
-| | | ... | cpu_node=${numa} | jumbo=${jumbo} | rxq_count_int=${rxq_count_int}
-| | | ... | buffers_per_numa=${215040}
-| | | ... | filename=/tmp/vswitch.conf | if1=${if1_pci} | if2=${if2_pci}
-| | | Run keyword if | ${thr_count_int} > 1
-| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
-| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
-| | Set Test Variable | ${smt_used}
-| | Set Test Variable | ${thr_count_int}
-| | Set Test Variable | ${cpu_count_int}
-| | Set Test Variable | ${rxq_count_int}
+| | | Run Keyword | ${dut}.Add Buffers Per Numa | ${buffers_numa}
+| | END
-| Create Kubernetes VNF'${i}' startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VNF in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ${i_int}= | Convert To Integer | ${i}
-| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut1} | phy_cores=${vnf_cpus} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut2} | phy_cores=${vnf_cpus} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-
-| Add PCI devices to all DUTs
-| | [Documentation]
-| | ... | Add PCI devices to VPP configuration file.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | ${if1_pci}= | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ${if1_1_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_1}
-| | | ${if1_2_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_2}
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | ${if2_pci}= | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2}
-| | | ${if2_1_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_1}
-| | | ${if2_2_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_2}
-| | | @{pci_devs}= | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Create List | ${if1_pci}
-| | | ... | ELSE
-| | | ... | Create List | ${if1_1_pci} | ${if1_2_pci}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Append To List | ${pci_devs} | ${if2_pci}
-| | | ... | ELSE
-| | | ... | Append To List | ${pci_devs} | ${if2_1_pci} | ${if2_2_pci}
-| | | Run keyword | ${dut}.Add DPDK Dev | @{pci_devs}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if1_1_pci} | ${if1_1_pci}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if1_2_pci} | ${if1_2_pci}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci}
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if2_1_pci} | ${if2_1_pci}
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Set Test Variable | ${${dut}_if2_2_pci} | ${if2_2_pci}
-
-| Add single PCI device to all DUTs
+| Create compute resources variables
| | [Documentation]
-| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on
-| | ... | DUT2 to VPP configuration file.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
-| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci}
-| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci}
-
-| Add no multi seg to all DUTs
-| | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK No Multi Seg
-
-| Add DPDK no PCI to all DUTs
-| | [Documentation] | Add DPDK no-pci to VPP startup configuration to all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK no PCI
-
-| Add DPDK dev default RXD to all DUTs
-| | [Documentation] | Add DPDK num-rx-desc to VPP startup configuration to all
-| | ... | DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - rxd - Number of RX descriptors. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK dev default RXD to all DUTs \| ${rxd} \|
-| | ...
-| | [Arguments] | ${rxd}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Dev Default RXD | ${rxd}
-
-| Add DPDK dev default TXD to all DUTs
-| | [Documentation] | Add DPDK num-tx-desc to VPP startup configuration to all
-| | ... | DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - txd - Number of TX descriptors. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK dev default TXD to all DUTs \| ${txd} \|
-| | ...
-| | [Arguments] | ${txd}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Dev Default TXD | ${txd}
-
-| Add DPDK Uio Driver on all DUTs
-| | [Documentation] | Add DPDK uio driver to VPP startup configuration on all
-| | ... | DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - uio_driver - Required uio driver. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK Uio Driver on all DUTs \| igb_uio \|
-| | ...
-| | [Arguments] | ${uio_driver}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Uio Driver | ${uio_driver}
+| | ... | Create compute resources variables
+| |
+| | ... | _NOTE:_ This KW sets various suite variables based on computed
+| | ... | resources.
+| |
+| | ${variables}= | Get Dictionary Keys | ${compute_resource_info}
+| | FOR | ${variable} | IN | @{variables}
+| | | ${value}= | Get From Dictionary | ${compute_resource_info} | ${variable}
+| | | Set Test Variable | ${${variable}} | ${value}
+| | END
+| | Run Keyword If | ${dp_count_int} > 1
+| | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
+| | Set Tags | ${dp_count_int}T${cpu_count_int}C
| Add NAT to all DUTs
| | [Documentation] | Add NAT configuration to all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add NAT
-
-| Add cryptodev to all DUTs
-| | [Documentation] | Add Cryptodev to VPP startup configuration to all DUTs.
-| | ...
+| |
| | ... | *Arguments:*
-| | ... | - count - Number of QAT devices. Type: integer
-| | ...
+| | ... | - nat_mode - NAT mode; default value: deterministic. Type: string
+| |
| | ... | *Example:*
-| | ...
-| | ... | \| Add cryptodev to all DUTs \| ${4} \|
-| | ...
-| | [Arguments] | ${count}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
-| | | ${thr_count_int}= | Run keyword if | ${smt_used}
-| | | ... | Evaluate | int(${count}*2)
-| | | ... | ELSE | Set variable | ${count}
-| | | Run keyword | ${dut}.Add DPDK Cryptodev | ${thr_count_int}
+| |
+| | ... | \| Add NAT to all DUTs \| nat_mode=endpoint-dependent \|
+| |
+| | [Arguments] | ${nat_mode}=deterministic
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword | ${dut}.Add NAT | value=${nat_mode}
+| | END
-| Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
-| | [Documentation] | Add required number of SW crypto devices of given type
-| | ... | to VPP startup configuration on all DUTs in 3-node single-link
-| | ... | circular topology.
-| | ...
+| Add NAT max translations per thread to all DUTs
+| | [Documentation] | Add NAT maximum number of translations per thread
+| | ... | configuration.
+| |
| | ... | *Arguments:*
-| | ... | - sw_pmd_type - PMD type of SW crypto device. Type: string
-| | ... | - count - Number of SW crypto devices. Type: string
-| | ...
+| | ... | - max_translations_per_thread - NAT maximum number of translations per
+| | ... | thread. Type: string
+| |
| | ... | *Example:*
-| | ...
-| | ... | \| Add DPDK SW cryptodev on DUTs in 3-node single-link circular\
-| | ... | topology \| aesni-mb \| ${2} \|
-| | ...
-| | [Arguments] | ${sw_pmd_type} | ${count}
-| | ${smt_used}= | Is SMT enabled | ${nodes['DUT1']['cpuinfo']}
-| | ${thr_count_int}= | Run keyword if | ${smt_used}
-| | ... | Evaluate | int(${count}*2)
-| | ... | ELSE | Set variable | ${count}
-| | ${socket_id}= | Get Interface Numa Node | ${nodes['DUT1']} | ${dut1_if2}
-| | Run keyword | DUT1.Add DPDK SW Cryptodev | ${sw_pmd_type} | ${socket_id}
-| | ... | ${thr_count_int}
-| | ${smt_used}= | Is SMT enabled | ${nodes['DUT2']['cpuinfo']}
-| | ${thr_count_int}= | Run keyword if | ${smt_used}
-| | ... | Evaluate | int(${count}*2)
-| | ... | ELSE | Set variable | ${count}
-| | ${socket_id}= | Get Interface Numa Node | ${nodes['DUT2']} | ${dut2_if1}
-| | Run keyword | DUT2.Add DPDK SW Cryptodev | ${sw_pmd_type} | ${socket_id}
-| | ... | ${thr_count_int}
+| |
+| | ... | \| Add NAT translation memory to all DUTs \
+| | ... | \| max_translations_per_thread=2048 \|
+| |
+| | [Arguments] | ${max_translations_per_thread}=1024
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword | ${dut}.Add NAT max translations per thread
+| | | ... | value=${max_translations_per_thread}
+| | END
| Write startup configuration on all VPP DUTs
-| | [Documentation] | Write VPP startup configuration on all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Write Config
+| | [Documentation] | Write VPP startup configuration without restarting VPP.
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword | ${dut}.Write Config
+| | END
| Apply startup configuration on all VPP DUTs
| | [Documentation] | Write VPP startup configuration and restart VPP on all
| | ... | DUTs.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - with_trace - Enable packet trace after VPP restart Type: boolean
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Apply startup configuration on all VPP DUTs \| False \|
-| | ...
+| |
| | [Arguments] | ${with_trace}=${False}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Apply Config
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword | ${dut}.Apply Config
+| | END
| | Save VPP PIDs
| | Enable Coredump Limit VPP on All DUTs | ${nodes}
| | Update All Interface Data On All Nodes | ${nodes} | skip_tg=${True}
-| | Run keyword If | ${with_trace} | VPP Enable Traces On All Duts | ${nodes}
+| | Run Keyword If | ${with_trace} | VPP Enable Traces On All Duts | ${nodes}
+
+| Apply startup configuration on VPP DUT
+| | [Documentation] | Write VPP startup configuration and restart VPP DUT.
+| |
+| | ... | *Arguments:*
+| | ... | - dut - DUT on which to apply the configuration. Type: string
+| | ... | - with_trace - Enable packet trace after VPP restart Type: boolean
+| |
+| | [Arguments] | ${dut} | ${with_trace}=${False}
+| |
+| | Run Keyword | ${dut}.Apply Config
+| | Save VPP PIDs on DUT | ${dut}
+| | Enable Coredump Limit VPP on DUT | ${nodes['${dut}']}
+| | ${dutnode}= | Copy Dictionary | ${nodes}
+| | Keep In Dictionary | ${dutnode} | ${dut}
+| | Update All Interface Data On All Nodes | ${dutnode} | skip_tg=${True}
+| | Run Keyword If | ${with_trace} | VPP Enable Traces On Dut
+| | ... | ${nodes['${dut}']}
| Save VPP PIDs
| | [Documentation] | Get PIDs of VPP processes from all DUTs in topology and\
| | ... | set it as a test variable. The PIDs are stored as dictionary items\
| | ... | where the key is the host and the value is the PID.
-| | ...
+| |
| | ${setup_vpp_pids}= | Get VPP PIDs | ${nodes}
| | ${keys}= | Get Dictionary Keys | ${setup_vpp_pids}
-| | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${key} | IN | @{keys}
+| | FOR | ${key} | IN | @{keys}
| | | ${pid}= | Get From Dictionary | ${setup_vpp_pids} | ${key}
| | | Run Keyword If | $pid is None | FAIL | No VPP PID found on node ${key}
+| | END
+| | Set Test Variable | ${setup_vpp_pids}
+
+| Save VPP PIDs on DUT
+| | [Documentation] | Get PID of VPP processes from DUT and\
+| | ... | set it as a test variable. The PID is stored as dictionary item\
+| | ... | where the key is the host and the value is the PID.
+| |
+| | [Arguments] | ${dut}
+| |
+| | ${vpp_pids}= | Get VPP PID | ${nodes['${dut}']}
+| | Run Keyword If | ${vpp_pids} is None | FAIL
+| | ... | No VPP PID found on node ${nodes['${dut}']['host']
+| | ${status} | ${message}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${setup_vpp_pids}
+| | ${setup_vpp_pids}= | Run Keyword If | '${status}' == 'FAIL'
+| | ... | Create Dictionary | ${nodes['${dut}']['host']}=${vpp_pids}
+| | ... | ELSE | Set To Dictionary | ${setup_vpp_pids}
+| | ... | ${nodes['${dut}']['host']}=${vpp_pids}
| | Set Test Variable | ${setup_vpp_pids}
| Verify VPP PID in Teardown
| | [Documentation] | Check if the VPP PIDs on all DUTs are the same at the end\
| | ... | of test as they were at the begining. If they are not, only a message\
| | ... | is printed on console and to log. The test will not fail.
-| | ...
+| |
| | ${teardown_vpp_pids}= | Get VPP PIDs | ${nodes}
| | ${err_msg}= | Catenate | ${SUITE NAME} - ${TEST NAME}
| | ... | \nThe VPP PIDs are not equal!\nTest Setup VPP PIDs:
| | ... | ${setup_vpp_pids}\nTest Teardown VPP PIDs: ${teardown_vpp_pids}
-| | ${rc} | ${msg}= | Run keyword and ignore error
+| | ${rc} | ${msg}= | Run Keyword And Ignore Error
| | ... | Dictionaries Should Be Equal
| | ... | ${setup_vpp_pids} | ${teardown_vpp_pids}
| | Run Keyword And Return If | '${rc}'=='FAIL' | Log | ${err_msg}
| | ... | console=yes | level=WARN
-
-| Set up functional test
-| | [Documentation] | Common test setup for functional tests.
-| | ...
-| | Restart Vpp Service On All Duts | ${nodes}
-| | Verify Vpp On All Duts | ${nodes}
-| | VPP Enable Traces On All Duts | ${nodes}
-| | Save VPP PIDs
-| | All TGs Set Interface Default Driver | ${nodes}
-| | Update All Interface Data On All Nodes | ${nodes}
-| | Reset PAPI History On All DUTs | ${nodes}
-
-| Tear down functional test
-| | [Documentation] | Common test teardown for functional tests.
-| | ...
-| | Remove All Added Ports On All DUTs From Topology | ${nodes}
-| | Show Packet Trace on All DUTs | ${nodes}
-| | Show PAPI History On All DUTs | ${nodes}
-| | Vpp Show Errors On All DUTs | ${nodes}
-| | Verify VPP PID in Teardown
-
-| Tear down LISP functional test
-| | [Documentation] | Common test teardown for functional tests with LISP.
-| | ...
-| | Remove All Added Ports On All DUTs From Topology | ${nodes}
-| | Show Packet Trace on All DUTs | ${nodes}
-| | Show PAPI History On All DUTs | ${nodes}
-| | Show Vpp Settings | ${nodes['DUT1']}
-| | Show Vpp Settings | ${nodes['DUT2']}
-| | Vpp Show Errors On All DUTs | ${nodes}
-| | Verify VPP PID in Teardown
-
-| Stop VPP Service on DUT
-| | [Documentation] | Stop the VPP service on the specified node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Stop VPP Service on DUT \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop VPP Service | ${node}
Code Review / csit.git / blobdiff