-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/vm/qemu.robot
| Variables | resources/libraries/python/topology.py
-| Variables | resources/libraries/python/VatHistory.py
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.VatHistory
+| Variables | resources/libraries/python/PapiHistory.py
+| ...
+| Library | Collections
+| Library | OperatingSystem
+| Library | String
+| ...
+| Library | resources.libraries.python.CoreDumpUtil
| Library | resources.libraries.python.CpuUtils
| Library | resources.libraries.python.DUTSetup
-| Library | resources.libraries.python.SchedUtils
-| Library | resources.libraries.python.TGSetup
| Library | resources.libraries.python.L2Util
+| Library | resources.libraries.python.SchedUtils
| Library | resources.libraries.python.Tap
-| Library | resources.libraries.python.VppConfigGenerator
+| Library | resources.libraries.python.TGSetup
+| Library | resources.libraries.python.PapiHistory
| Library | resources.libraries.python.VppCounters
| Library | resources.libraries.python.VPPUtil
-| Library | Collections
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.topology.Topology
+| ...
+| Resource | resources/libraries/robot/shared/container.robot
+| Resource | resources/libraries/robot/vm/qemu.robot
*** Keywords ***
| Configure all DUTs before test
| Configure crypto device on all DUTs
| | [Documentation] | Verify if Crypto QAT device virtual functions are
| | ... | initialized on all DUTs. If parameter force_init is set to True, then
-| | ... | try to initialize.
+| | ... | try to initialize/disable.
| | ...
| | ... | *Arguments:*
-| | ... | - ${force_init} - Try to initialize. Type: boolean
+| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx.
+| | ... | Type: string, default value: HW_DH895xcc
+| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs
+| | ... | Type: integer, default value: ${32}
+| | ... | - force_init - Force to initialize. Type: boolean
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Configure crypto device on all DUTs \| ${True} \|
+| | ... | \| Configure crypto device on all DUTs \| HW_DH895xcc \| ${32} \|
| | ...
-| | [Arguments] | ${force_init}=${False}
+| | [Arguments] | ${crypto_type} | ${numvfs} | ${force_init}=${False}
| | ...
| | ${duts}= | Get Matches | ${nodes} | DUT*
| | :FOR | ${dut} | IN | @{duts}
-| | | Crypto Device Verify | ${nodes['${dut}']} | force_init=${force_init}
+| | | Crypto Device Verify | ${nodes['${dut}']} | ${crypto_type}
+| | | ... | ${numvfs} | force_init=${force_init}
+
+| Configure AVF interfaces on all DUTs
+| | [Documentation] | Configure virtual functions for AVF interfaces on PCI
+| | ... | interface on all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs
+| | ... | (Optional). Type: integer, default value: ${1}
+| | ... | - traffic_profile - A value affecting behavior, such as spoofing.
+| | ... | (Optional). Type: string, default value: L2
+| | ... | Note: This is NOT the usual traffic profile
+| | ... | (which is python module name to initialize TG with).
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure AVF device on all DUTs \| ${1} \| L2 \|
+| | ...
+| | [Arguments] | ${numvfs}=${1} | ${traffic_profile}=L2
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${if1_avf_arr}= | Init AVF interface | ${nodes['${dut}']} | ${${dut}_if1}
+| | | ... | numvfs=${numvfs} | traffic_type=${traffic_profile}
+| | | ${if2_avf_arr}= | Init AVF interface | ${nodes['${dut}']} | ${${dut}_if2}
+| | | ... | numvfs=${numvfs} | traffic_type=${traffic_profile}
+# Currently only one AVF is supported.
+| | | Set Suite Variable | ${${dut}_if1_vf0} | ${if1_avf_arr[0]}
+| | | Set Suite Variable | ${${dut}_if2_vf0} | ${if2_avf_arr[0]}
| Configure kernel module on all DUTs
| | [Documentation] | Verify if specific kernel module is loaded on all DUTs.
-| | ... | If parameter force_load is set to True, then try to initialize.
+| | ... | If parameter force_load is set to True, then try to load.
| | ...
| | ... | *Arguments:*
-| | ... | - ${module} - Module to verify. Type: string
-| | ... | - ${force_load} - Try to load module. Type: boolean
+| | ... | - module - Module to verify. Type: string
+| | ... | - force_load - Try to load module. Type: boolean
| | ...
| | ... | *Example:*
| | ...
| | ...
| | [Arguments] | ${module} | ${force_load}=${False}
| | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
-| | | Kernel Module Verify | ${nodes['${dut}']} | ${module}
-| | | ... | force_load=${force_load}
+| | Verify Kernel Module on All DUTs | ${nodes} | ${module}
+| | ... | force_load=${force_load}
| Create base startup configuration of VPP on all DUTs
| | [Documentation] | Create base startup configuration of VPP to all DUTs.
| | | Run keyword | ${dut}.Add Unix Log
| | | Run keyword | ${dut}.Add Unix CLI Listen
| | | Run keyword | ${dut}.Add Unix Nodaemon
-| | | Run keyword | ${dut}.Add DPDK Socketmem | "1024,1024"
-| | | Run keyword | ${dut}.Add Heapsize | "3G"
-| | | Run keyword | ${dut}.Add IP6 Hash Buckets | "2000000"
-| | | Run keyword | ${dut}.Add IP6 Heap Size | "3G"
+| | | Run keyword | ${dut}.Add Unix Coredump
+| | | Run keyword | ${dut}.Add DPDK No Tx Checksum Offload
+| | | Run keyword | ${dut}.Add DPDK Log Level | debug
+| | | Run keyword | ${dut}.Add DPDK Uio Driver
+| | | Run keyword | ${dut}.Add Heapsize | 4G
+| | | Run keyword | ${dut}.Add Statseg size | 4G
+| | | Run keyword | ${dut}.Add Plugin | disable | default
+| | | Run keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
+| | | Run keyword | ${dut}.Add IP6 Hash Buckets | 2000000
+| | | Run keyword | ${dut}.Add IP6 Heap Size | 4G
+| | | Run keyword | ${dut}.Add IP Heap Size | 4G
-| Add '${m}' worker threads and '${n}' rxqueues in 3-node single-link circular topology
-| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\
-| | ... | configuration on all DUTs in 3-node single-link topology.
+| Add worker threads and rxqueues to all DUTs
+| | [Documentation] | Setup worker threads and rxqueues in vpp startup
+| | ... | configuration on all DUTs. Based on the SMT configuration of DUT if
+| | ... | enabled keyword will automatically map also the sibling logical cores.
+| | ... | Keyword will automatically set the appropriate test TAGs in format
+| | ... | mTnC, where m=logical_core_count and n=physical_core_count.
| | ...
-| | ${m_int}= | Convert To Integer | ${m}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${1} | cpu_cnt=${1}
-| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${2} | cpu_cnt=${m_int}
-| | ${dut2_cpu_main}= | Cpu list per node str | ${dut2} | ${dut2_numa}
-| | ... | skip_cnt=${1} | cpu_cnt=${1}
-| | ${dut2_cpu_w}= | Cpu list per node str | ${dut2} | ${dut2_numa}
-| | ... | skip_cnt=${2} | cpu_cnt=${m_int}
-| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main}
-| | Run keyword | DUT2.Add CPU Main Core | ${dut2_cpu_main}
-| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w}
-| | Run keyword | DUT2.Add CPU Corelist Workers | ${dut2_cpu_w}
-| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n}
-| | Run keyword | DUT2.Add DPDK Dev Default RXQ | ${n}
-
-| Add '${m}' worker threads and '${n}' rxqueues in 2-node single-link circular topology
-| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\
-| | ... | configuration on all DUTs in 2-node single-link topology.
-| | ...
-| | ${m_int}= | Convert To Integer | ${m}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${1} | cpu_cnt=${1}
-| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${2} | cpu_cnt=${m_int}
-| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main}
-| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w}
-| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n}
-
-| Add '${m}' worker threads using SMT and '${n}' rxqueues in 3-node single-link circular topology
-| | [Documentation] | Setup M worker threads using SMT and N rxqueues in vpp\
-| | ... | startup configuration on all DUTs in 3-node single-link topology.
-| | ...
-| | ${m_int}= | Convert To Integer | ${m}
+| | ... | *Arguments:*
+| | ... | - phy_cores - Number of physical cores to use. Type: integer
+| | ... | - rx_queues - Number of RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add worker threads and rxqueues to all DUTs \| ${1} \| ${1} \|
+| | ...
+| | [Arguments] | ${phy_cores} | ${rx_queues}=${None}
+| | ...
+| | ${cpu_count_int} | Convert to Integer | ${phy_cores}
+| | ${thr_count_int} | Convert to Integer | ${phy_cores}
+| | ${num_mbufs_int} | Convert to Integer | 16384
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if1}
+| | | @{if_list}= | Run Keyword If | '${if1_status}' == 'PASS'
+| | | ... | Create List | ${${dut}_if1}
+| | | ... | ELSE | Create List | ${${dut}_if1_1} | ${${dut}_if1_2}
+| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if2}
+| | | Run Keyword If | '${if2_status}' == 'PASS'
+| | | ... | Append To List | ${if_list} | ${${dut}_if2}
+| | | ... | ELSE
+| | | ... | Append To List | ${if_list} | ${${dut}_if2_1} | ${${dut}_if2_2}
+| | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']} | @{if_list}
+| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
+| | | ${cpu_main}= | Cpu list per node str | ${nodes['${dut}']} | ${numa}
+| | | ... | skip_cnt=${1} | cpu_cnt=${1}
+| | | ${cpu_wt}= | Cpu list per node str | ${nodes['${dut}']} | ${numa}
+| | | ... | skip_cnt=${2} | cpu_cnt=${cpu_count_int} | smt_used=${smt_used}
+| | | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | | ... | Evaluate | int(${cpu_count_int}*2)
+| | | ... | ELSE | Set variable | ${thr_count_int}
+| | | ${rxq_count_int}= | Run keyword if | ${rx_queues}
+| | | ... | Set variable | ${rx_queues}
+| | | ... | ELSE | Evaluate | int(${thr_count_int}/2)
+| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
+| | | ... | Set variable | ${1}
+| | | ... | ELSE | Set variable | ${rxq_count_int}
+| | | ${num_mbufs_int}= | Evaluate | int(${num_mbufs_int}*${rxq_count_int})
+| | | Run keyword | ${dut}.Add CPU Main Core | ${cpu_main}
+| | | Run keyword | ${dut}.Add CPU Corelist Workers | ${cpu_wt}
+| | | Run keyword | ${dut}.Add DPDK Dev Default RXQ | ${rxq_count_int}
+# Temporarily desabling due to API changes:
+# https://gerrit.fd.io/r/#/c/16638/
+#| | | Run keyword | ${dut}.Add DPDK Num Mbufs | ${num_mbufs_int}
+| | | Run keyword if | ${thr_count_int} > 1
+| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
+| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
+| | Set Test Variable | ${smt_used}
+| | Set Test Variable | ${thr_count_int}
+| | Set Test Variable | ${cpu_count_int}
+| | Set Test Variable | ${rxq_count_int}
+
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${jumbo} - Jumbo packet. Type: boolean
+| | ... | - ${phy_cores} - Physical cores. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${True} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo}=${False}
+| | ...
+| | ${cpu_count_int} | Convert to Integer | ${phy_cores}
+| | ${thr_count_int} | Convert to Integer | ${phy_cores}
+| | ${num_mbufs_int} | Convert to Integer | 16384
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']}
+| | | ... | ${${dut}_if1} | ${${dut}_if2}
+| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
+| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1}
+| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2}
+| | | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | | ... | Evaluate | int(${cpu_count_int}*2)
+| | | ... | ELSE | Set variable | ${thr_count_int}
+| | | ${rxq_count_int}= | Run keyword if | ${rx_queues}
+| | | ... | Set variable | ${rx_queues}
+| | | ... | ELSE | Evaluate | int(${thr_count_int}/2)
+| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
+| | | ... | Set variable | ${1}
+| | | ... | ELSE | Set variable | ${rxq_count_int}
+| | | ${num_mbufs_int}= | Evaluate | int(${num_mbufs_int}*${rxq_count_int})
+| | | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | | ... | node=${nodes['${dut}']} | phy_cores=${phy_cores}
+| | | ... | cpu_node=${numa} | jumbo=${jumbo} | rxq_count_int=${rxq_count_int}
+| | | ... | num_mbufs_int=${num_mbufs_int}
+| | | ... | filename=/tmp/vswitch.conf | if1=${if1_pci} | if2=${if2_pci}
+| | | Run keyword if | ${thr_count_int} > 1
+| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
+| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
+| | Set Test Variable | ${smt_used}
+| | Set Test Variable | ${thr_count_int}
+| | Set Test Variable | ${cpu_count_int}
+| | Set Test Variable | ${rxq_count_int}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
| | ... | ${dut1_if1} | ${dut1_if2}
| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True}
-| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True}
-| | ${dut2_cpu_main}= | Cpu list per node str | ${dut2} | ${dut2_numa}
-| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True}
-| | ${dut2_cpu_w}= | Cpu list per node str | ${dut2} | ${dut2_numa}
-| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True}
-| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main}
-| | Run keyword | DUT2.Add CPU Main Core | ${dut2_cpu_main}
-| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w}
-| | Run keyword | DUT2.Add CPU Corelist Workers | ${dut2_cpu_w}
-| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n}
-| | Run keyword | DUT2.Add DPDK Dev Default RXQ | ${n}
-
-| Add '${m}' worker threads using SMT and '${n}' rxqueues in 2-node single-link circular topology
-| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\
-| | ... | configuration on all DUTs in 2-node single-link topology.
-| | ...
-| | ${m_int}= | Convert To Integer | ${m}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True}
-| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa}
-| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True}
-| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main}
-| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w}
-| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | phy_cores=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | phy_cores=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
| Add no multi seg to all DUTs
| | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs.
| | :FOR | ${dut} | IN | @{duts}
| | | Run keyword | ${dut}.Add DPDK No Multi Seg
+| Add DPDK no PCI to all DUTs
+| | [Documentation] | Add DPDK no-pci to VPP startup configuration to all DUTs.
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Run keyword | ${dut}.Add DPDK no PCI
+
| Add DPDK dev default RXD to all DUTs
| | [Documentation] | Add DPDK num-rx-desc to VPP startup configuration to all
| | ... | DUTs.
| | :FOR | ${dut} | IN | @{duts}
| | | Run keyword | ${dut}.Add DPDK Dev Default TXD | ${txd}
+| Add DPDK Uio Driver on all DUTs
+| | [Documentation] | Add DPDK uio driver to VPP startup configuration on all
+| | ... | DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - uio_driver - Required uio driver. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add DPDK Uio Driver on all DUTs \| igb_uio \|
+| | ...
+| | [Arguments] | ${uio_driver}
+| | ...
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Run keyword | ${dut}.Add DPDK Uio Driver | ${uio_driver}
+
| Add NAT to all DUTs
| | [Documentation] | Add NAT configuration to all DUTs.
| | ...
| | [Documentation] | Add Cryptodev to VPP startup configuration to all DUTs.
| | ...
| | ... | *Arguments:*
-| | ... | - ${count} - Number of QAT devices. Type: integer
+| | ... | - count - Number of QAT devices. Type: integer
| | ...
| | ... | *Example:*
| | ...
| | [Arguments] | ${count}
| | ${duts}= | Get Matches | ${nodes} | DUT*
| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add DPDK Cryptodev | ${count}
+| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
+| | | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | | ... | Evaluate | int(${count}*2)
+| | | ... | ELSE | Set variable | ${count}
+| | | Run keyword | ${dut}.Add DPDK Cryptodev | ${thr_count_int}
+
+| Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
+| | [Documentation] | Add required number of SW crypto devices of given type
+| | ... | to VPP startup configuration on all DUTs in 3-node single-link
+| | ... | circular topology.
+| | ...
+| | ... | *Arguments:*
+| | ... | - sw_pmd_type - PMD type of SW crypto device. Type: string
+| | ... | - count - Number of SW crypto devices. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Add DPDK SW cryptodev on DUTs in 3-node single-link circular\
+| | ... | topology \| aesni-mb \| ${2} \|
+| | ...
+| | [Arguments] | ${sw_pmd_type} | ${count}
+| | ${smt_used}= | Is SMT enabled | ${nodes['DUT1']['cpuinfo']}
+| | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | ... | Evaluate | int(${count}*2)
+| | ... | ELSE | Set variable | ${count}
+| | ${socket_id}= | Get Interface Numa Node | ${nodes['DUT1']} | ${dut1_if2}
+| | Run keyword | DUT1.Add DPDK SW Cryptodev | ${sw_pmd_type} | ${socket_id}
+| | ... | ${thr_count_int}
+| | ${smt_used}= | Is SMT enabled | ${nodes['DUT2']['cpuinfo']}
+| | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | ... | Evaluate | int(${count}*2)
+| | ... | ELSE | Set variable | ${count}
+| | ${socket_id}= | Get Interface Numa Node | ${nodes['DUT2']} | ${dut2_if1}
+| | Run keyword | DUT2.Add DPDK SW Cryptodev | ${sw_pmd_type} | ${socket_id}
+| | ... | ${thr_count_int}
| Apply startup configuration on all VPP DUTs
| | [Documentation] | Write startup configuration and restart VPP on all DUTs.
| | ...
+| | ... | *Arguments:*
+| | ... | - restart_vpp - Whether to restart VPP (Optional). Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Apply startup configuration on all VPP DUTs \| ${False} \|
+| | ...
+| | [Arguments] | ${restart_vpp}=${True}
+| | ...
| | ${duts}= | Get Matches | ${nodes} | DUT*
| | :FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Apply Config
-| | Update All Interface Data On All Nodes | ${nodes} | skip_tg=${TRUE}
+| | | Run keyword | ${dut}.Apply Config | restart_vpp=${restart_vpp}
+| | Enable Coredump Limit VPP on All DUTs | ${nodes}
+| | Update All Interface Data On All Nodes | ${nodes} | skip_tg=${True}
| Save VPP PIDs
| | [Documentation] | Get PIDs of VPP processes from all DUTs in topology and\
| | Save VPP PIDs
| | Configure all TGs for traffic script
| | Update All Interface Data On All Nodes | ${nodes}
-| | Reset VAT History On All DUTs | ${nodes}
+| | Reset PAPI History On All DUTs | ${nodes}
| Tear down functional test
| | [Documentation] | Common test teardown for functional tests.
| | ...
| | Remove All Added Ports On All DUTs From Topology | ${nodes}
| | Show Packet Trace on All DUTs | ${nodes}
-| | Show VAT History On All DUTs | ${nodes}
+| | Show PAPI History On All DUTs | ${nodes}
+| | Vpp Show Errors On All DUTs | ${nodes}
+| | Verify VPP PID in Teardown
+
+| Set up VPP device test
+# TODO: Generalize this KW if it will not diverge from Functional derivate too
+# much
+| | [Documentation] | Common test setup for vpp-device tests.
+| | ...
+| | Configure all DUTs before test
+| | Save VPP PIDs
+| | Configure all TGs for traffic script
+| | Update All Interface Data On All Nodes | ${nodes} | skip_tg_udev=${True}
+| | Reset PAPI History On All DUTs | ${nodes}
+
+| Tear down VPP device test
+# TODO: Generalize this KW if it will not diverge from Functional derivate too
+# much
+| | [Documentation] | Common test teardown for vpp-device tests.
+| | ...
+| | Remove All Added Ports On All DUTs From Topology | ${nodes}
+| | Show Packet Trace on All DUTs | ${nodes}
+| | Show PAPI History On All DUTs | ${nodes}
| | Vpp Show Errors On All DUTs | ${nodes}
| | Verify VPP PID in Teardown
| | ...
| | Remove All Added Ports On All DUTs From Topology | ${nodes}
| | Show Packet Trace on All DUTs | ${nodes}
-| | Show VAT History On All DUTs | ${nodes}
+| | Show PAPI History On All DUTs | ${nodes}
| | Show Vpp Settings | ${nodes['DUT1']}
| | Show Vpp Settings | ${nodes['DUT2']}
| | Vpp Show Errors On All DUTs | ${nodes}
| | [Documentation] | Common test teardown for functional tests with LISP and\
| | ... | QEMU.
| | ...
-| | ... | *Arguments:*
-| | ... | - vm_node - VM to stop. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Tear down LISP functional test with QEMU \| ${vm_node} \|
-| | ...
-| | [Arguments] | ${vm_node}
-| | ...
| | Remove All Added Ports On All DUTs From Topology | ${nodes}
| | Show Packet Trace on All DUTs | ${nodes}
-| | Show VAT History On All DUTs | ${nodes}
+| | Show PAPI History On All DUTs | ${nodes}
| | Show Vpp Settings | ${nodes['DUT1']}
| | Show Vpp Settings | ${nodes['DUT2']}
| | Vpp Show Errors On All DUTs | ${nodes}
-| | Stop and clear QEMU | ${nodes['DUT1']} | ${vm_node}
+| | Tear down QEMU
| | Verify VPP PID in Teardown
| Set up TAP functional test
| | Set up functional test
| | Clean Up Namespaces | ${nodes['DUT1']}
+| Set up functional test with containers
+| | [Documentation]
+| | ... | Common test setup for functional tests with containers.
+| | ...
+| | ... | *Arguments:*
+| | ... | - chains: Total number of chains (Optional). Type: integer, default
+| | ... | value: ${1}
+| | ... | - nodeness: Total number of nodes per chain (Optional). Type: integer,
+| | ... | default value: ${1}
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variables:
+| | ... | - dcr_uuid - Parent container UUID.
+| | ... | - dcr_root - Parent container overlay.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Set up functional test with containers \| 1 \| 1 \|
+| | ...
+| | [Arguments] | ${chains}=${1} | ${nodeness}=${1}
+| | ...
+| | Set Test Variable | @{container_groups} | @{EMPTY}
+| | Set Test Variable | ${container_group} | CNF
+| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager
+| | ... | engine=${container_engine} | WITH NAME | ${container_group}
+| | ...
+| | ${dcr_uuid}= | Get Environment Variable | CSIT_DUT1_UUID
+| | ${dcr_root}= | Run Keyword | Get Docker Mergeddir | ${nodes['DUT1']}
+| | ... | ${dcr_uuid}
+| | Set Test Variable | ${dcr_uuid}
+| | Set Test Variable | ${dcr_root}
+| | ...
+| | Construct chains of containers on all DUTs | ${chains} | ${nodeness}
+| | ... | nested=${True}
+| | Acquire all '${container_group}' containers
+| | Create all '${container_group}' containers
+| | Configure VPP in all '${container_group}' containers
+| | Start VPP in all '${container_group}' containers
+| | Append To List | ${container_groups} | ${container_group}
+
| Tear down TAP functional test
| | [Documentation] | Common test teardown for functional tests with TAP.
| | ...
| | Linux Del Bridge | ${nodes['DUT1']} | ${bid_TAP}
| | Clean Up Namespaces | ${nodes['DUT1']}
+| Tear down functional test with container
+| | [Documentation]
+| | ... | Common test teardown for functional tests which uses containers.
+| | ...
+| | :FOR | ${container_group} | IN | @{container_groups}
+| | | Destroy all '${container_group}' containers
+
| Stop VPP Service on DUT
| | [Documentation] | Stop the VPP service on the specified node.
| | ...
Code Review / csit.git / blobdiff