fix: add missing closing END

[csit.git] / resources / libraries / robot / shared / interfaces.robot

diff --git a/resources/libraries/robot/shared/interfaces.robot b/resources/libraries/robot/shared/interfaces.robot
index a9b6440..d6d3538 100644 (file)
--- a/resources/libraries/robot/shared/interfaces.robot
+++ b/resources/libraries/robot/shared/interfaces.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -137,7 +137,8 @@
 | | Run Keyword If | ${index} >= 0 | Return From Keyword
 | | FOR | ${dut} | IN | @{duts}
 | | | Stop VPP Service | ${nodes['${dut}']}
-| | | PCI Driver Unbind List | ${nodes['${dut}']} | @{${dut}_pf_pci}
+| | | Unbind PCI Devices From Other Driver | ${nodes['${dut}']} | vfio-pci |
+| | | ... | @{${dut}_pf_pci}
 | | | Run keyword | ${dut}.Add DPDK Dev | @{${dut}_pf_pci}
 | | | Run Keyword If | ${dpdk_no_tx_checksum_offload}
 | | | ... | ${dut}.Add DPDK No Tx Checksum Offload
@@ -151,12 +152,9 @@
 | | | Run Keyword If | ${nic_txq_size} > 0
 | | | ... | ${dut}.Add DPDK Dev Default TXD | ${nic_txq_size}
 | | | Run Keyword If | '${crypto_type}' != '${None}'
-| | | ... | ${dut}.Add DPDK Cryptodev | ${thr_count_int}
+| | | ... | ${dut}.Add DPDK Cryptodev | ${dp_count_int}
+| | | Run Keyword | ${dut}.Add DPDK Max Simd Bitwidth | ${GRAPH_NODE_VARIANT}
 | | END
-| | ${_vlan_strip} | ${value}= | Run Keyword And Ignore Error
-| | ... | Variable Should Exist | ${vlan_strip_off}
-| | Run keyword If | '${_vlan_strip}' == 'PASS' and ${duts_count} == 2
-| | ... | Add DPDK VLAN strip offload switch off between DUTs
 
 | Pre-initialize layer avf on all DUTs
 | | [Documentation]
@@ -164,15 +162,29 @@
 | |
 | | No operation
 
+| Pre-initialize layer af_xdp on all DUTs
+| | [Documentation]
+| | ... | Pre-initialize af_xdp driver.
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Set Interface State PCI
+| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | state=up
+| | | Set Interface Channels
+| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | num_queues=${rxq_count_int}
+| | | ... | channel=combined
+| | END
+
 | Pre-initialize layer rdma-core on all DUTs
 | | [Documentation]
 | | ... | Pre-initialize rdma-core driver.
 | |
 | | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword If | ${jumbo}
+| | | ... | Set Interface MTU | ${nodes['${dut}']} | ${${dut}_pf_pci} | mtu=9200
+| | | ... | ELSE
+| | | ... | Set Interface MTU | ${nodes['${dut}']} | ${${dut}_pf_pci} | mtu=1518
 | | | Set Interface Flow Control
-| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | rx="off" | tx="off"
-| | | Set PCI Parameter
-| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | key="68.w" | value="3BCD"
+| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | rxf="off" | txf="off"
 | | END
 
 | Pre-initialize layer mlx5_core on all DUTs
@@ -183,11 +195,9 @@
 | | | Run Keyword If | ${jumbo}
 | | | ... | Set Interface MTU | ${nodes['${dut}']} | ${${dut}_pf_pci} | mtu=9200
 | | | ... | ELSE
-| | | ... | Set Interface MTU | ${nodes['${dut}']} | ${${dut}_pf_pci} | mtu=1500
+| | | ... | Set Interface MTU | ${nodes['${dut}']} | ${${dut}_pf_pci} | mtu=1518
 | | | Set Interface Flow Control
-| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | rx="off" | tx="off"
-| | | Set PCI Parameter
-| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | key="68.w" | value="3BCD"
+| | | ... | ${nodes['${dut}']} | ${${dut}_pf_pci} | rxf="off" | txf="off"
 | | END
 
 | Initialize layer driver
@@ -377,6 +387,32 @@
 | | | Set List Value | ${${dut}_vf${pf}_vlan} | ${vf} | ${_vlan}
 | | END
 
+| Initialize layer af_xdp on node
+| | [Documentation]
+| | ... | Initialize AF_XDP (eBPF) interfaces on DUT on NIC PF.
+| |
+| | ... | *Arguments:*
+| | ... | - dut - DUT node. Type: string
+| | ... | - pf - NIC physical function (physical port). Type: integer
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Initialize layer af_xdp on node \| DUT1 \| 1 \|
+| |
+| | [Arguments] | ${dut} | ${pf}
+| |
+| | ${_af_xdp}= | VPP Create AF XDP Interface
+| | ... | ${nodes['${dut}']} | ${${dut}_vf${pf}}[0]
+| | ... | num_rx_queues=${65535}
+| | ... | rxq_size=${nic_rxq_size} | txq_size=${nic_txq_size}
+| | ${cpu_skip_cnt}= | Evaluate | ${CPU_CNT_SYSTEM}+${CPU_CNT_MAIN}
+| | ${cpu_skip_cnt}= | Evaluate | ${cpu_skip_cnt}+${cpu_count_int}
+| | ${cpu_skip_cnt}= | Evaluate | ${cpu_skip_cnt}+(${pf}-${1})*${rxq_count_int}
+| | Set Interface IRQs Affinity
+| | ... | ${nodes['${dut}']} | ${_af_xdp}
+| | ... | cpu_skip_cnt=${cpu_skip_cnt} | cpu_cnt=${rxq_count_int}
+| | Set List Value | ${${dut}_vf${pf}} | 0 | ${_af_xdp}
+
 | Initialize layer rdma-core on node
 | | [Documentation]
 | | ... | Initialize rdma-core (Mellanox VPP) interfaces on DUT on NIC PF.