VIRL test: Replace IP probe for VXLAN test

[csit.git] / resources / libraries / robot / vxlan.robot

diff --git a/resources/libraries/robot/vxlan.robot b/resources/libraries/robot/vxlan.robot
index ebf5d35..0b53c85 100644 (file)
--- a/resources/libraries/robot/vxlan.robot
+++ b/resources/libraries/robot/vxlan.robot
@@ -20,58 +20,15 @@
 | Library  | resources.libraries.python.L2Util
 | Library  | resources.libraries.python.IPUtil
 | Library  | resources.libraries.python.IPv4Util
+| Library  | resources.libraries.python.IPv6Util
 | Library  | resources.libraries.python.IPv4Setup
 | Library  | resources.libraries.python.NodePath
 
 *** Keywords ***
-| Path for VXLAN testing is set
-| | [Documentation] | *Compute path for VXLAN testing on nodes.*
-| | ...
-| | ... | _Set testcase variables with interfaces and nodes:_
-| | ... | - ${tgs_to_dut1}
-| | ... | - ${dut1s_to_tg}
-| | ... | - ${tgs_to_dut2}
-| | ... | - ${dut2s_to_tg}
-| | ... | - ${dut1s_to_dut2}
-| | ... | - ${dut2s_to_dut1}
-| | ... | - ${tg}
-| | ... | - ${dut1}
-| | ... | - ${dut2}
-| | ...
-| | [Arguments] | ${TG} | ${DUT1} | ${DUT2}
-| | Append Nodes | ${TG} | ${DUT1} | ${DUT2} | ${TG}
-| | Compute Path
-| | ${tgs_to_dut1} | ${tg}= | Next Interface
-| | ${dut1s_to_tg} | ${dut1}= | Next Interface
-| | ${dut1s_to_dut2} | ${dut1}= | Next Interface
-| | ${dut2s_to_dut1} | ${dut2}= | Next Interface
-| | ${dut2s_to_tg} | ${dut2}= | Next Interface
-| | ${tgs_to_dut2} | ${tg}= | Next Interface
-| | Set Test Variable | ${tgs_to_dut1}
-| | Set Test Variable | ${dut1s_to_tg}
-| | Set Test Variable | ${tgs_to_dut2}
-| | Set Test Variable | ${dut2s_to_tg}
-| | Set Test Variable | ${dut1s_to_dut2}
-| | Set Test Variable | ${dut2s_to_dut1}
-| | Set Test Variable | ${tg}
-| | Set Test Variable | ${dut1}
-| | Set Test Variable | ${dut2}
-
-| Interfaces in path are up
-| | [Documentation] | *Set UP state on interfaces in path on nodes.*
-| | ...
-| | Set Interface State | ${tg} | ${tgs_to_dut1} | up
-| | Set Interface State | ${tg} | ${tgs_to_dut2} | up
-| | Set Interface State | ${dut1} | ${dut1s_to_tg} | up
-| | Set Interface State | ${dut1} | ${dut1s_to_dut2} | up
-| | Set Interface State | ${dut2} | ${dut2s_to_tg} | up
-| | Set Interface State | ${dut2} | ${dut2s_to_dut1} | up
-| | Vpp Node Interfaces Ready Wait | ${dut1}
-| | Vpp Node Interfaces Ready Wait | ${dut2}
-
 | IP addresses are set on interfaces
 | | [Documentation] | *Set IPv4 addresses on interfaces on DUTs.*
 | | ... | If interface index is None then is determines with Get Interface Sw Index
+| | ... | in this case it is required the interface to be present in topology dict.
 | | ... | It also executes VPP IP Probe to determine MACs to IPs on DUTs
 | | ...
 | | ... | _Set testcase variables with IP addresses and prefix length:_
@@ -84,18 +41,24 @@
 | | Set Test Variable | ${dut1s_ip_address} | 172.16.0.1
 | | Set Test Variable | ${dut2s_ip_address} | 172.16.0.2
 | | Set Test Variable | ${duts_ip_address_prefix} | 24
+| | ${DUT1_INT_KEY}= | Run Keyword If | ${DUT1_INT_INDEX} is None
+| |                  | ... | Get Interface by name | ${DUT1} | ${DUT1_INT_NAME}
+| | ${DUT2_INT_KEY}= | Run Keyword If | ${DUT2_INT_INDEX} is None
+| |                  | ... | Get Interface by name | ${DUT2} | ${DUT2_INT_NAME}
 | | ${DUT1_INT_INDEX}= | Run Keyword If | ${DUT1_INT_INDEX} is None
-| |                    | ... | Get Interface Sw Index | ${DUT1} | ${DUT1_INT_NAME}
+| |                    | ... | Get Interface Sw Index | ${DUT1} | ${DUT1_INT_KEY}
 | |                    | ... | ELSE | Set Variable | ${DUT1_INT_INDEX}
 | | ${DUT2_INT_INDEX}= | Run Keyword If | ${DUT2_INT_INDEX} is None
-| |                    | ... | Get Interface Sw Index | ${DUT2} | ${DUT2_INT_NAME}
+| |                    | ... | Get Interface Sw Index | ${DUT2} | ${DUT2_INT_KEY}
 | |                    | ... | ELSE | Set Variable | ${DUT2_INT_INDEX}
+| | ${DUT1_INT_MAC}= | Vpp Get Interface Mac | ${DUT1} | ${DUT1_INT_INDEX}
+| | ${DUT2_INT_MAC}= | Vpp Get Interface Mac | ${DUT2} | ${DUT2_INT_INDEX}
 | | Set Interface Address | ${DUT1} | ${DUT1_INT_INDEX}
 | | ... | ${dut1s_ip_address} | ${duts_ip_address_prefix}
 | | Set Interface Address | ${DUT2} | ${DUT2_INT_INDEX}
 | | ... | ${dut2s_ip_address} | ${duts_ip_address_prefix}
-| | VPP IP Probe | ${DUT1} | ${DUT1_INT_NAME} | ${dut2s_ip_address}
-| | VPP IP Probe | ${DUT2} | ${DUT2_INT_NAME} | ${dut1s_ip_address}
+| | Add IP Neighbor | ${DUT1} | ${DUT1_INT_INDEX} | ${dut2s_ip_address} | ${DUT2_INT_MAC}
+| | Add IP Neighbor | ${DUT2} | ${DUT2_INT_INDEX} | ${dut1s_ip_address} | ${DUT1_INT_MAC}
 
 | VXLAN interface is created
 | | [Arguments] | ${DUT} | ${VNI} | ${SRC_IP} | ${DST_IP}
@@ -107,7 +70,7 @@
 
 | Interfaces are added to xconnect
 | | [Arguments] | ${DUT} | ${INTERFACE_1} | ${INTERFACE_2}
-| |  L2 setup xconnect on DUT | ${DUT} | ${INTERFACE_1} | ${INTERFACE_2}
+| | L2 setup xconnect on DUT | ${DUT} | ${INTERFACE_1} | ${INTERFACE_2}
 
 | Vlan interfaces for VXLAN are created
 | | [Documentation] | *Create VLAN subinterface on interfaces on DUTs with given VLAN ID.*
@@ -119,10 +82,12 @@
 | | ... | - ${dut2s_vlan_index}
 | | ...
 | | [Arguments] | ${VLAN} | ${DUT1} | ${INT1} | ${DUT2} | ${INT2}
+| | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1}
+| | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2}
 | | ${dut1s_vlan_name} | ${dut1s_vlan_index}= | Create Vlan Subinterface
-| |                    | ...                  | ${DUT1} | ${INT1} | ${VLAN}
+| |                    | ...                  | ${DUT1} | ${INT1_NAME} | ${VLAN}
 | | ${dut2s_vlan_name} | ${dut2s_vlan_index}= | Create Vlan Subinterface
-| |                    | ...                  | ${DUT2} | ${INT2} | ${VLAN}
+| |                    | ...                  | ${DUT2} | ${INT2_NAME} | ${VLAN}
 | | Set Interface State | ${DUT1} | ${dut1s_vlan_index} | up
 | | Set Interface State | ${DUT2} | ${dut2s_vlan_index} | up
 | | Set Test Variable | ${dut1s_vlan_name}