| Library | resources.libraries.python.L2Util
| Library | resources.libraries.python.IPUtil
| Library | resources.libraries.python.IPv4Util
+| Library | resources.libraries.python.IPv6Util
| Library | resources.libraries.python.IPv4Setup
| Library | resources.libraries.python.NodePath
*** Keywords ***
-| Path for VXLAN testing is set
-| | [Documentation] | *Compute path for VXLAN testing on nodes.*
-| | ...
-| | ... | _Set testcase variables with interfaces and nodes:_
-| | ... | - ${tgs_to_dut1}
-| | ... | - ${dut1s_to_tg}
-| | ... | - ${tgs_to_dut2}
-| | ... | - ${dut2s_to_tg}
-| | ... | - ${dut1s_to_dut2}
-| | ... | - ${dut2s_to_dut1}
-| | ... | - ${tg}
-| | ... | - ${dut1}
-| | ... | - ${dut2}
-| | ...
-| | [Arguments] | ${TG} | ${DUT1} | ${DUT2}
-| | Append Nodes | ${TG} | ${DUT1} | ${DUT2} | ${TG}
-| | Compute Path
-| | ${tgs_to_dut1} | ${tg}= | Next Interface
-| | ${dut1s_to_tg} | ${dut1}= | Next Interface
-| | ${dut1s_to_dut2} | ${dut1}= | Next Interface
-| | ${dut2s_to_dut1} | ${dut2}= | Next Interface
-| | ${dut2s_to_tg} | ${dut2}= | Next Interface
-| | ${tgs_to_dut2} | ${tg}= | Next Interface
-| | Set Test Variable | ${tgs_to_dut1}
-| | Set Test Variable | ${dut1s_to_tg}
-| | Set Test Variable | ${tgs_to_dut2}
-| | Set Test Variable | ${dut2s_to_tg}
-| | Set Test Variable | ${dut1s_to_dut2}
-| | Set Test Variable | ${dut2s_to_dut1}
-| | Set Test Variable | ${tg}
-| | Set Test Variable | ${dut1}
-| | Set Test Variable | ${dut2}
-
-| Interfaces in path are up
-| | [Documentation] | *Set UP state on interfaces in path on nodes.*
-| | ...
-| | Set Interface State | ${tg} | ${tgs_to_dut1} | up
-| | Set Interface State | ${tg} | ${tgs_to_dut2} | up
-| | Set Interface State | ${dut1} | ${dut1s_to_tg} | up
-| | Set Interface State | ${dut1} | ${dut1s_to_dut2} | up
-| | Set Interface State | ${dut2} | ${dut2s_to_tg} | up
-| | Set Interface State | ${dut2} | ${dut2s_to_dut1} | up
-| | Vpp Node Interfaces Ready Wait | ${dut1}
-| | Vpp Node Interfaces Ready Wait | ${dut2}
-
-| IP addresses are set on interfaces
+| Configure IP addresses and neighbors on interfaces
| | [Documentation] | *Set IPv4 addresses on interfaces on DUTs.*
| | ... | If interface index is None then is determines with Get Interface Sw Index
+| | ... | in this case it is required the interface to be present in topology dict.
| | ... | It also executes VPP IP Probe to determine MACs to IPs on DUTs
| | ...
| | ... | _Set testcase variables with IP addresses and prefix length:_
| | Set Test Variable | ${dut1s_ip_address} | 172.16.0.1
| | Set Test Variable | ${dut2s_ip_address} | 172.16.0.2
| | Set Test Variable | ${duts_ip_address_prefix} | 24
+| | ${DUT1_INT_KEY}= | Run Keyword If | ${DUT1_INT_INDEX} is None
+| | | ... | Get Interface by name | ${DUT1} | ${DUT1_INT_NAME}
+| | ${DUT2_INT_KEY}= | Run Keyword If | ${DUT2_INT_INDEX} is None
+| | | ... | Get Interface by name | ${DUT2} | ${DUT2_INT_NAME}
| | ${DUT1_INT_INDEX}= | Run Keyword If | ${DUT1_INT_INDEX} is None
-| | | ... | Get Interface Sw Index | ${DUT1} | ${DUT1_INT_NAME}
+| | | ... | Get Interface Sw Index | ${DUT1} | ${DUT1_INT_KEY}
| | | ... | ELSE | Set Variable | ${DUT1_INT_INDEX}
| | ${DUT2_INT_INDEX}= | Run Keyword If | ${DUT2_INT_INDEX} is None
-| | | ... | Get Interface Sw Index | ${DUT2} | ${DUT2_INT_NAME}
+| | | ... | Get Interface Sw Index | ${DUT2} | ${DUT2_INT_KEY}
| | | ... | ELSE | Set Variable | ${DUT2_INT_INDEX}
+| | ${DUT1_INT_MAC}= | Vpp Get Interface Mac | ${DUT1} | ${DUT1_INT_INDEX}
+| | ${DUT2_INT_MAC}= | Vpp Get Interface Mac | ${DUT2} | ${DUT2_INT_INDEX}
| | Set Interface Address | ${DUT1} | ${DUT1_INT_INDEX}
| | ... | ${dut1s_ip_address} | ${duts_ip_address_prefix}
| | Set Interface Address | ${DUT2} | ${DUT2_INT_INDEX}
| | ... | ${dut2s_ip_address} | ${duts_ip_address_prefix}
-| | VPP IP Probe | ${DUT1} | ${DUT1_INT_NAME} | ${dut2s_ip_address}
-| | VPP IP Probe | ${DUT2} | ${DUT2_INT_NAME} | ${dut1s_ip_address}
+| | Add IP Neighbor | ${DUT1} | ${DUT1_INT_INDEX} | ${dut2s_ip_address} | ${DUT2_INT_MAC}
+| | Add IP Neighbor | ${DUT2} | ${DUT2_INT_INDEX} | ${dut1s_ip_address} | ${DUT1_INT_MAC}
| VXLAN interface is created
| | [Arguments] | ${DUT} | ${VNI} | ${SRC_IP} | ${DST_IP}
| | Create VXLAN interface | ${DUT} | ${VNI} | ${SRC_IP} | ${DST_IP}
-| Interfaces are added to BD
+| Add interfaces to L2BD
| | [Arguments] | ${DUT} | ${BID} | ${INTERFACE_1} | ${INTERFACE_2}
| | Vpp Add L2 Bridge Domain | ${DUT} | ${BID} | ${INTERFACE_1} | ${INTERFACE_2}
-| Interfaces are added to xconnect
+| Add interfaces to L2XC
| | [Arguments] | ${DUT} | ${INTERFACE_1} | ${INTERFACE_2}
-| | L2 setup xconnect on DUT | ${DUT} | ${INTERFACE_1} | ${INTERFACE_2}
+| | Configure L2XC | ${DUT} | ${INTERFACE_1} | ${INTERFACE_2}
-| Vlan interfaces for VXLAN are created
+| Create vlan interfaces for VXLAN
| | [Documentation] | *Create VLAN subinterface on interfaces on DUTs with given VLAN ID.*
| | ...
| | ... | _Set testcase variables with name and index of created interfaces:_
| | ... | - ${dut2s_vlan_index}
| | ...
| | [Arguments] | ${VLAN} | ${DUT1} | ${INT1} | ${DUT2} | ${INT2}
+| | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1}
+| | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2}
| | ${dut1s_vlan_name} | ${dut1s_vlan_index}= | Create Vlan Subinterface
-| | | ... | ${DUT1} | ${INT1} | ${VLAN}
+| | | ... | ${DUT1} | ${INT1_NAME} | ${VLAN}
| | ${dut2s_vlan_name} | ${dut2s_vlan_index}= | Create Vlan Subinterface
-| | | ... | ${DUT2} | ${INT2} | ${VLAN}
+| | | ... | ${DUT2} | ${INT2_NAME} | ${VLAN}
| | Set Interface State | ${DUT1} | ${dut1s_vlan_index} | up
| | Set Interface State | ${DUT2} | ${dut2s_vlan_index} | up
| | Set Test Variable | ${dut1s_vlan_name}
| | Set Test Variable | ${dut1s_vlan_index}
| | Set Test Variable | ${dut2s_vlan_name}
| | Set Test Variable | ${dut2s_vlan_index}
+
+| Send VXLAN encapsulated packet and verify received packet
+| | [Documentation] | Send VXLAN encapsulated Ethernet frame and check \
+| | ... | received one.
+| | ...
+| | ... | *Arguments:*
+| | ... | - tg_node - Node where to run traffic script. Type: dictionary
+| | ... | - tx_if - Interface from where send VXLAN packet. Type: string
+| | ... | - rx_if - Interface where receive VXLAN packet. Type: string
+| | ... | - tx_src_mac - Source MAC address of sent packet. Type: string
+| | ... | - tx_dst_mac - Destination MAC address of sent packet. Type: string
+| | ... | - tx_src_ip - Source IP address of sent VXLAN packet. Type: string
+| | ... | - tx_dst_ip - Destination IP address of sent VXLAN packet.
+| | ... | Type: string
+| | ... | - tx_vni - VNI of sent VXLAN packet. Type: string
+| | ... | - rx_src_ip - Source IP address of received VXLAN packet. Type: string
+| | ... | - rx_dst_ip - Destination IP address of received VXLAN packet.
+| | ... | Type: string
+| | ... | - rx_vni - VNI of received VXLAN packet. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send VXLAN encapsulated packet and verify received packet \| ${tg_node} \| port4 \| port4 \
+| | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \
+| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \|
+| | ...
+| | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if}
+| | ... | ${tx_src_mac} | ${tx_dst_mac}
+| | ... | ${tx_src_ip} | ${tx_dst_ip} | ${tx_vni}
+| | ... | ${rx_src_ip} | ${rx_dst_ip} | ${rx_vni}
+| | ${tx_if_name}= | Get interface name | ${tg_node} | ${tx_if}
+| | ${rx_if_name}= | Get interface name | ${tg_node} | ${rx_if}
+| | ${args}= | Catenate
+| | ... | --tx_if ${tx_if_name}
+| | ... | --rx_if ${rx_if_name}
+| | ... | --tx_src_mac ${tx_src_mac}
+| | ... | --tx_dst_mac ${tx_dst_mac}
+| | ... | --tx_src_ip ${tx_src_ip}
+| | ... | --tx_dst_ip ${tx_dst_ip}
+| | ... | --tx_vni ${tx_vni}
+| | ... | --rx_src_ip ${rx_src_ip}
+| | ... | --rx_dst_ip ${rx_dst_ip}
+| | ... | --rx_vni ${rx_vni}
+| | Run Traffic Script On Node | send_vxlan_check_vxlan.py | ${tg_node} | ${args}
Code Review / csit.git / blobdiff