CSIT-219: Realocate resources for Honeycomb tests

[csit.git] / resources / test_data / honeycomb / l2_fib.py

diff --git a/resources/test_data/honeycomb/l2_fib.py b/resources/test_data/honeycomb/l2_fib.py
new file mode 100644 (file)
index 0000000..b06193a
--- /dev/null
+++ b/resources/test_data/honeycomb/l2_fib.py
@@ -0,0 +1,142 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables for Honeycomb L2 FIB test suite."""
+
+# Bridge domain name.
+bd_name = 'test-l2-bd'
+bd_index = 1
+
+# Bridge domain settings used while creating a test bridge domain.
+bd_settings = {
+    'flood': True,
+    'forward': True,
+    'learn': True,
+    'unknown-unicast-flood': True,
+    'arp-termination': True
+}
+
+# Bridge domain configuration used while adding the bridge domain to an
+# interface.
+if_bd_settings = {
+    'bridge-domain': bd_name,
+    'split-horizon-group': 1,
+    'bridged-virtual-interface': False
+}
+
+# Add L2 FIB entry (forward).
+# Configuration data:
+l2_fib_forward_cfg = {
+    "phys-address": "aa:bb:cc:dd:ee:ff",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "action": "l2-fib-forward"
+}
+
+# Expected operational data:
+l2_fib_forward_oper = {
+    "phys-address": "aa:bb:cc:dd:ee:ff",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "bridged-virtual-interface": False,
+    "action": "v3po:l2-fib-forward",
+    "static-config": False
+}
+
+# Expected VAT data:
+l2_fib_forward_vat = {
+    "mac": int("".join(l2_fib_forward_oper["phys-address"].split(':')), 16),
+    "static_mac": 0,
+    "filter_mac": 0,
+    "bvi_mac": 0
+  }
+
+# Add L2 FIB entry (static, forward).
+# Configuration data:
+l2_fib_static_forward_cfg = {
+    "phys-address": "22:22:33:44:55:66",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "static-config": True,
+    "action": "l2-fib-forward"
+}
+
+# Expected operational data:
+l2_fib_static_forward_oper = {
+    "phys-address": "22:22:33:44:55:66",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "bridged-virtual-interface": False,
+    "action": "v3po:l2-fib-forward",
+    "static-config": True
+}
+
+# Expected VAT data:
+l2_fib_static_forward_vat = {
+    "mac": int("".join(l2_fib_static_forward_oper["phys-address"].
+                       split(':')), 16),
+    "sw_if_index": 5,
+    "static_mac": 1,
+    "filter_mac": 0,
+    "bvi_mac": 0
+}
+
+# Add L2 FIB entry (filter).
+# Configuration data:
+l2_fib_filter_cfg = {
+    "phys-address": "00:01:02:03:04:05",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "static-config": True,
+    "action": "l2-fib-filter"
+}
+
+# Expected operational data:
+l2_fib_filter_oper = {
+    "phys-address": "00:01:02:03:04:05",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "bridged-virtual-interface": False,
+    "action": "v3po:l2-fib-filter",
+    "static-config": True
+}
+
+# Expected VAT data:
+l2_fib_filter_vat = {
+    "mac": int("".join(l2_fib_filter_oper["phys-address"].split(':')), 16),
+    "sw_if_index": 5,
+    "static_mac": 1,
+    "filter_mac": 1,
+    "bvi_mac": 0
+}
+
+# WRONG configuration data - Add L2 FIB entry.
+l2_fib_forward_cfg_wrong_mac = {
+    "phys-address": "WRONG-MAC",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "action": "l2-fib-forward"
+}
+
+l2_fib_forward_cfg_wrong_if = {
+    "phys-address": "aa:bb:cc:dd:ee:ff",
+    "outgoing-interface": "WRONG-INTERFACE",
+    "action": "l2-fib-forward"
+}
+
+l2_fib_forward_cfg_wrong_action = {
+    "phys-address": "aa:bb:cc:dd:ee:ff",
+    "outgoing-interface": "GigabitEthernet0/8/0",
+    "action": "WRONG-ACTION"
+}
+
+# Modify L2 FIB entry (forward).
+# Configuration data:
+l2_fib_forward_modified_cfg = {
+    "phys-address": "aa:bb:cc:dd:ee:ff",
+    "outgoing-interface": "GigabitEthernet0/9/0",
+    "action": "l2-fib-forward"
+}