--- /dev/null
+job "prod-storage" {
+ # The "region" parameter specifies the region in which to execute the job.
+ # If omitted, this inherits the default region name of "global".
+ # region = "global"
+ #
+ # The "datacenters" parameter specifies the list of datacenters which should
+ # be considered when placing this task. This must be provided.
+ datacenters = [ "yul1" ]
+
+ # The "type" parameter controls the type of job, which impacts the scheduler's
+ # decision on placement. This configuration is optional and defaults to
+ # "service". For a full list of job types and their differences, please see
+ # the online documentation.
+ #
+ # For more information, please see the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/jobspec/schedulers.html
+ #
+ type = "service"
+
+ update {
+ # The "max_parallel" parameter specifies the maximum number of updates to
+ # perform in parallel. In this case, this specifies to update a single task
+ # at a time.
+ max_parallel = 0
+
+ # The "min_healthy_time" parameter specifies the minimum time the allocation
+ # must be in the healthy state before it is marked as healthy and unblocks
+ # further allocations from being updated.
+ min_healthy_time = "10s"
+
+ # The "healthy_deadline" parameter specifies the deadline in which the
+ # allocation must be marked as healthy after which the allocation is
+ # automatically transitioned to unhealthy. Transitioning to unhealthy will
+ # fail the deployment and potentially roll back the job if "auto_revert" is
+ # set to true.
+ healthy_deadline = "3m"
+
+ # The "progress_deadline" parameter specifies the deadline in which an
+ # allocation must be marked as healthy. The deadline begins when the first
+ # allocation for the deployment is created and is reset whenever an allocation
+ # as part of the deployment transitions to a healthy state. If no allocation
+ # transitions to the healthy state before the progress deadline, the
+ # deployment is marked as failed.
+ progress_deadline = "10m"
+
+ # The "auto_revert" parameter specifies if the job should auto-revert to the
+ # last stable job on deployment failure. A job is marked as stable if all the
+ # allocations as part of its deployment were marked healthy.
+ auto_revert = false
+
+ # The "canary" parameter specifies that changes to the job that would result
+ # in destructive updates should create the specified number of canaries
+ # without stopping any previous allocations. Once the operator determines the
+ # canaries are healthy, they can be promoted which unblocks a rolling update
+ # of the remaining allocations at a rate of "max_parallel".
+ #
+ # Further, setting "canary" equal to the count of the task group allows
+ # blue/green deployments. When the job is updated, a full set of the new
+ # version is deployed and upon promotion the old version is stopped.
+ canary = 0
+ }
+
+ # All groups in this job should be scheduled on different hosts.
+ constraint {
+ operator = "distinct_hosts"
+ value = "true"
+ }
+
+ # the same Nomad client. Any task within a group will be placed on the same
+ # client.
+ #
+ # For more information and examples on the "group" stanza, please see
+ # the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/job-specification/group.html
+ #
+ group "prod-group1-storage" {
+ # The "count" parameter specifies the number of the task groups that should
+ # be running under this group. This value must be non-negative and defaults
+ # to 1.
+ count = 2
+
+ # Hard coding prefered node as primary.
+ affinity {
+ attribute = "${attr.unique.hostname}"
+ value = "s46-nomad"
+ weight = 100
+ }
+
+ # https://www.nomadproject.io/docs/job-specification/volume
+ volume "prod-volume1-storage" {
+ type = "host"
+ read_only = false
+ source = "prod-volume-data1-1"
+ }
+
+ # The "task" stanza creates an individual unit of work, such as a Docker
+ # container, web application, or batch processing.
+ #
+ # For more information and examples on the "task" stanza, please see
+ # the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/job-specification/task.html
+ #
+ task "prod-task1-storage" {
+ # The "driver" parameter specifies the task driver that should be used to
+ # run the task.
+ driver = "docker"
+
+ volume_mount {
+ volume = "prod-volume1-storage"
+ destination = "/data/"
+ read_only = false
+ }
+
+ # The "config" stanza specifies the driver configuration, which is passed
+ # directly to the driver to start the task. The details of configurations
+ # are specific to each driver, so please see specific driver
+ # documentation for more information.
+ config {
+ image = "minio/minio:RELEASE.2020-11-19T23-48-16Z"
+ dns_servers = [ "${attr.unique.network.ip-address}" ]
+ command = "server"
+ args = [ "/data/" ]
+ port_map {
+ http = 9000
+ }
+ privileged = false
+ }
+
+ env {
+ MINIO_ACCESS_KEY = "minio"
+ MINIO_SECRET_KEY = "minio123"
+ MINIO_BROWSER = "off"
+ }
+
+ # The service stanza instructs Nomad to register a service with Consul.
+ #
+ # For more information and examples on the "task" stanza, please see
+ # the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/job-specification/service.html
+ #
+ service {
+ name = "storage"
+ port = "http"
+ tags = [ "storage${NOMAD_ALLOC_INDEX}" ]
+ check {
+ name = "alive"
+ type = "http"
+ port = "http"
+ protocol = "http"
+ method = "GET"
+ path = "/minio/health/live"
+ interval = "10s"
+ timeout = "2s"
+ task = "${TASK}"
+ }
+ }
+
+ # The "resources" stanza describes the requirements a task needs to
+ # execute. Resource requirements include memory, network, cpu, and more.
+ # This ensures the task will execute on a machine that contains enough
+ # resource capacity.
+ #
+ # For more information and examples on the "resources" stanza, please see
+ # the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/job-specification/resources.html
+ #
+ resources {
+ cpu = 2000
+ memory = 2048
+ network {
+ port "http" {
+ static = 9000
+ }
+ }
+ }
+ }
+
+ task "prod-task2-sync" {
+ # The "raw_exec" parameter specifies the task driver that should be used
+ # to run the task.
+ driver = "raw_exec"
+
+ # The "template" stanza instructs Nomad to manage a template, such as
+ # a configuration file or script. This template can optionally pull data
+ # from Consul or Vault to populate runtime configuration data.
+ #
+ # For more information and examples on the "template" stanza, please see
+ # the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/job-specification/template.html
+ #
+ template {
+ data = <<EOH
+#!/bin/bash
+
+INOTIFY_OPTONS="--recursive --monitor"
+VOLUMES="/data/logs.fd.io /data/docs.fd.io"
+
+if [ '{{ env "attr.unique.network.ip-address" }}' = "10.32.8.14" ]; then
+echo "Running notify daemon"
+ inotifywait -e moved_to ${INOTIFY_OPTONS} ${VOLUMES} | \
+ while read path action file; do
+ key="testuser"
+ secret="Csit1234"
+
+ resource=${path#"/data"}${file}
+ date=$(date -R)
+ _signature="PUT\n\napplication/octet-stream\n${date}\n${resource}"
+ signature=$(echo -en ${_signature} | openssl sha1 -hmac ${secret} -binary | base64)
+
+ curl -v -X PUT -T "${path}${file}" \
+ -H "Host: storage0.storage.service.consul:9000" \
+ -H "Date: ${date}" \
+ -H "Content-Type: application/octet-stream" \
+ -H "Authorization: AWS ${key}:${signature}" \
+ http://storage0.storage.service.consul:9000${resource}
+ done
+else
+ while :; do sleep 2073600; done
+fi
+
+EOH
+ destination = "local/sync.sh"
+ perms = "755"
+ }
+
+ # The "config" stanza specifies the driver configuration, which is passed
+ # directly to the driver to start the task. The details of configurations
+ # are specific to each driver, so please see specific driver
+ # documentation for more information.
+ config {
+ command = "local/sync.sh"
+ }
+
+ # The "resources" stanza describes the requirements a task needs to
+ # execute. Resource requirements include memory, network, cpu, and more.
+ # This ensures the task will execute on a machine that contains enough
+ # resource capacity.
+ #
+ # For more information and examples on the "resources" stanza, please see
+ # the online documentation at:
+ #
+ # https://www.nomadproject.io/docs/job-specification/resources.html
+ #
+ resources {
+ cpu = 500
+ memory = 256
+ }
+ }
+ }
+}
\ No newline at end of file
Code Review / csit.git / blobdiff