--- /dev/null
+#!/usr/bin/env python
+
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Traffic script - IPFIX listener."""
+
+import sys
+from ipaddress import IPv4Address, IPv6Address, AddressValueError
+
+from scapy.layers.inet import IP, TCP, UDP
+from scapy.layers.inet6 import IPv6
+from scapy.layers.l2 import Ether
+
+from resources.libraries.python.IPFIXUtil import IPFIXHandler, IPFIXData
+from resources.libraries.python.PacketVerifier import RxQueue, TxQueue, auto_pad
+from resources.libraries.python.TrafficScriptArg import TrafficScriptArg
+
+
+def valid_ipv4(ip):
+ """Check if IP address has the correct IPv4 address format.
+
+ :param ip: IP address.
+ :type ip: str
+ :return: True in case of correct IPv4 address format,
+ otherwise return false.
+ :rtype: bool
+ """
+ try:
+ IPv4Address(unicode(ip))
+ return True
+ except (AttributeError, AddressValueError):
+ return False
+
+
+def valid_ipv6(ip):
+ """Check if IP address has the correct IPv6 address format.
+
+ :param ip: IP address.
+ :type ip: str
+ :return: True in case of correct IPv6 address format,
+ otherwise return false.
+ :rtype: bool
+ """
+ try:
+ IPv6Address(unicode(ip))
+ return True
+ except (AttributeError, AddressValueError):
+ return False
+
+
+def main():
+ """Send packets to VPP, then listen for IPFIX flow report. Verify that
+ the correct packet count was reported."""
+ args = TrafficScriptArg(
+ ['src_mac', 'dst_mac', 'src_ip', 'dst_ip', 'protocol', 'port', 'count']
+ )
+
+ dst_mac = args.get_arg('dst_mac')
+ src_mac = args.get_arg('src_mac')
+ src_ip = args.get_arg('src_ip')
+ dst_ip = args.get_arg('dst_ip')
+ tx_if = args.get_arg('tx_if')
+
+ protocol = args.get_arg('protocol')
+ source_port = int(args.get_arg('port'))
+ destination_port = int(args.get_arg('port'))
+ count = int(args.get_arg('count'))
+
+ txq = TxQueue(tx_if)
+ rxq = RxQueue(tx_if)
+
+ # generate simple packet based on arguments
+ ip_version = None
+ if valid_ipv4(src_ip) and valid_ipv4(dst_ip):
+ ip_version = IP
+ elif valid_ipv6(src_ip) and valid_ipv6(dst_ip):
+ ip_version = IPv6
+ else:
+ raise ValueError("Invalid IP version!")
+
+ if protocol.upper() == 'TCP':
+ protocol = TCP
+ elif protocol.upper() == 'UDP':
+ protocol = UDP
+ else:
+ raise ValueError("Invalid type of protocol!")
+
+ pkt_raw = (Ether(src=src_mac, dst=dst_mac) /
+ ip_version(src=src_ip, dst=dst_ip) /
+ protocol(sport=int(source_port),
+ dport=int(destination_port)))
+
+ # do not print details for sent packets when sending more than one
+ if count > 1:
+ verbose = False
+ print("Sending more than one packet. Details will be filtered for "
+ "all packets sent.")
+ else:
+ verbose = True
+
+ pkt_pad = auto_pad(pkt_raw)
+ ignore = []
+ for _ in range(count):
+ txq.send(pkt_pad, verbose=verbose)
+ ignore.append(pkt_pad)
+
+ # allow scapy to recognize IPFIX headers and templates
+ ipfix = IPFIXHandler()
+
+ # clear receive buffer
+ while True:
+ pkt = rxq.recv(1, ignore=ignore, verbose=verbose)
+ if pkt is None:
+ break
+
+ data = None
+ # get IPFIX template and data
+ while True:
+ pkt = rxq.recv(5)
+ if pkt is None:
+ raise RuntimeError("RX timeout")
+ if pkt.haslayer("IPFIXHeader"):
+ if pkt.haslayer("IPFIXTemplate"):
+ # create or update template for IPFIX data packets
+ ipfix.update_template(pkt)
+ elif pkt.haslayer("IPFIXData"):
+ data = pkt.getlayer(IPFIXData).fields
+ break
+ else:
+ raise RuntimeError("Unable to parse IPFIX set after header.")
+ else:
+ raise RuntimeError("Received non-IPFIX packet or IPFIX header "
+ "not recognized.")
+
+ # verify packet count
+ if data["packetTotalCount"] != count:
+ raise RuntimeError(
+ "IPFIX reported wrong packet count. Count was {0},"
+ " but should be {1}".format(data["packetTotalCount"], count))
+ # verify IP addresses
+ keys = data.keys()
+ err = "{0} mismatch. Packets used {1}, but were classified as {2}."
+ if ip_version == IP:
+ if "IPv4_src" in keys:
+ if data["IPv4_src"] != src_ip:
+ raise RuntimeError(
+ err.format("Source IP", src_ip, data["IPv4_src"]))
+ if "IPv4_dst" in keys:
+ if data["IPv4_dst"] != dst_ip:
+ raise RuntimeError(
+ err.format("Destination IP", dst_ip, data["IPv4_dst"]))
+ else:
+ if "IPv6_src" in keys:
+ if data["IPv6_src"] != src_ip:
+ raise RuntimeError(
+ err.format("Source IP", src_ip, data["IPv6_src"]))
+ if "IPv6_dst" in keys:
+ if data["IPv6_dst"] != dst_ip:
+ raise RuntimeError(
+ err.format("Source IP", src_ip, data["IPv6_dst"]))
+ # verify port numbers
+ for item in ("src_port", "tcp_src_port", "udp_src_port"):
+ try:
+ if int(data[item]) != source_port:
+ raise RuntimeError(
+ err.format("Source port", source_port, data[item]))
+ except KeyError:
+ pass
+ for item in ("dst_port", "tcp_dst_port", "udp_dst_port"):
+ try:
+ if int(data[item]) != destination_port:
+ raise RuntimeError(
+ err.format("Source port", destination_port, data[item]))
+ except KeyError:
+ pass
+ # verify protocol ID
+ if "Protocol_ID" in keys:
+ if protocol == TCP and int(data["Protocol_ID"]) != 6:
+ raise RuntimeError("TCP Packets were classified as not TCP.")
+ if protocol == UDP and int(data["Protocol_ID"]) != 17:
+ raise RuntimeError("UDP Packets were classified as not UDP.")
+ sys.exit(0)
+
+
+if __name__ == "__main__":
+
+ main()
Code Review / csit.git / blobdiff