{
"version": 4,
"terraform_version": "0.14.5",
- "serial": 1108,
+ "serial": 1112,
"lineage": "e4e7f30a-652d-7a31-e31c-5e3a3388c9b9",
"outputs": {},
"resources": [
"attributes": {
"filename": null,
"id": "9078b0e92799cb1fa8e6a6a0f7c9950fd4c0b563b3e98fd4168ebd9c770ba033",
- "rendered": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/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'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/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'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
+ "rendered": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
"template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-${version}.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: '${slack_default_receiver}'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: ${slack_jenkins_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_jenkins_receiver}'\n\n - match_re:\n service: .*\n receiver: ${slack_default_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_default_receiver}'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: '${slack_jenkins_receiver}'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/${slack_jenkins_api_key}'\n channel: '#${slack_jenkins_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: '${slack_default_receiver}'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/${slack_default_api_key}'\n channel: '#${slack_default_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
"vars": {
"cpu": "1000",
"deregister_on_id_change": true,
"detach": false,
"id": "prod-alertmanager",
- "jobspec": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/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'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/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'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'https://hooks.slack.com/services/'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
"json": null,
"modify_index": "7224418",
"name": "prod-alertmanager",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "631050b2-0973-35f9-30ab-1f80b2b56b28"
+ "a1bc1a10-95a5-3c33-a46d-849522abe4fe"
],
"datacenters": [
"yul1"
"id": "prod-mc",
"jobspec": "job \"prod-mc\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"batch\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-mc\" {\n task \"prod-task1-create-buckets\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/mc:RELEASE.2020-12-10T01-26-17Z\"\n entrypoint = [\n \"/bin/sh\",\n \"-c\",\n \"mc config host add LOCALMINIO http://storage.service.consul:9000 $MINIO_ACCESS_KEY $MINIO_SECRET_KEY \u0026\u0026 mc mb -p LOCALMINIO/logs.fd.io LOCALMINIO/docs.fd.io ; mc policy set public LOCALMINIO/logs.fd.io mc policy set public LOCALMINIO/docs.fd.io mc ilm add --expiry-days '180' LOCALMINIO/logs.fd.io mc admin user add LOCALMINIO storage Storage1234 mc admin policy set LOCALMINIO writeonly user=storage\"\n ]\n dns_servers = [ \"${attr.unique.network.ip-address}\" ]\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n \n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n \n \n }\n }\n }\n}\n",
"json": null,
- "modify_index": "7254273",
+ "modify_index": "7254549",
"name": "prod-mc",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "4a4840cd7c13ce07d6bf0743f56a523eabde46a27c583d17865967a03dbf717a",
- "rendered": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on VPP jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on VPP jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n %{ if use_host_volume }\n volume \"prod-volume1-${service_name}\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_host_volume }\n volume_mount {\n volume = \"prod-volume1-${service_name}\"\n destination = \"${data_dir}\"\n read_only = false\n }\n %{ endif }\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-${version}.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=${data_dir}prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on VPP jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on VPP jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
+ "id": "f4fe3d282a60afb0ef6713540a32d855d65713707e68cf8636a1afd38521b604",
+ "rendered": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n %{ if use_host_volume }\n volume \"prod-volume1-${service_name}\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_host_volume }\n volume_mount {\n volume = \"prod-volume1-${service_name}\"\n destination = \"${data_dir}\"\n read_only = false\n }\n %{ endif }\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-${version}.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=${data_dir}prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
"vars": {
"cpu": "2000",
"data_dir": "/data/",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "7722e831-d956-55a4-c375-f0e33485d234",
+ "fc9ab3e3-7854-65d5-0c82-28283383976a",
+ "5e526c5d-f7b5-f275-357c-48a739a96071",
+ "d816ca29-4cf4-f9be-4d48-edbddac472ae",
+ "794f7531-14f5-c1c3-9bf3-88936ee335e3",
"b1edacab-e57f-e014-4d4c-50e563c81ab7",
"2ee67e9b-5bc1-ca2b-c3c4-0509e02ee954",
- "c9c55369-2e27-8087-b156-f1923a57e1a0",
- "922f75f9-39c1-c232-9ef6-81d68a03c719",
- "6e23349f-9644-a20b-5c0e-db9d79733b3d",
- "0337957a-0d04-f4b6-4dfc-3b828a731498",
- "2705a9d9-913a-f2db-2535-abd85e9a5e6b",
- "57b9c1f1-0dbe-321e-5cce-861f766c5ee3"
+ "922f75f9-39c1-c232-9ef6-81d68a03c719"
],
"datacenters": [
"yul1"
],
- "deployment_id": "02342e30-fde4-3402-b201-ef649d404a95",
+ "deployment_id": "0a36a612-38de-5e1c-448e-72e29a2fb5f3",
"deployment_status": "successful",
"deregister_on_destroy": true,
"deregister_on_id_change": true,
"detach": false,
"id": "prod-prometheus",
- "jobspec": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on VPP jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on VPP jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e= 10\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "7254268",
+ "modify_index": "7254539",
"name": "prod-prometheus",
"namespace": "default",
"policy_override": null,
Code Review / csit.git / blobdiff