CSIT-1142 2-node topology - keywords DPDK

[csit.git] / tests / dpdk / perf / 10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot

diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot
index 5cf6a44..c955547 100644 (file)
--- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot
+++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot
@@ -50,8 +50,8 @@
 *** Keywords ***
 | Check RR for ethip4-ip4base-l3fwd
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with ${wt} thread(s), ${wt}\
-| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with ${wt} phy core(s),\
+| | ... | ${rxq} receive queue(s) per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
 | | ... | trial throughput test.
 | | ...
@@ -64,7 +64,7 @@
 | | ${jumbo_frames}= | Set Variable If
 | | ... | ${get_framesize} < ${1522} | no | yes
 | | ...
-| | Given Start L3FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}'
+| | Given Start L3FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 
@@ -120,7 +120,7 @@
 
 | tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 2 phy cores, 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\
 | | ... | trial throughput test.
@@ -132,7 +132,7 @@
 
 | tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 2 phy cores, 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
 | | ... | trial throughput test.
@@ -144,7 +144,7 @@
 
 | tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 2 phy cores, 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
 | | ... | trial throughput test.
@@ -156,7 +156,7 @@
 
 | tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 2 phy cores, 1 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\
 | | ... | trial throughput test.
@@ -169,7 +169,7 @@
 
 | tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 4 phy cores, 2 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\
 | | ... | trial throughput test.
@@ -181,7 +181,7 @@
 
 | tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 4 phy cores, 2 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
 | | ... | trial throughput test.
@@ -193,7 +193,7 @@
 
 | tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 4 phy cores, 2 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
 | | ... | trial throughput test.
@@ -205,7 +205,7 @@
 
 | tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr
 | | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with \
 | | ... | 4 phy cores, 2 receive queue per NIC port.
 | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\
 | | ... | trial throughput test.