Perf: Add perfmon_plugin for telemetry
[csit.git] / tests / dpdk / perf / 10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
index ecbe0a3..b556c7f 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
 | Resource | resources/libraries/robot/dpdk/default.robot
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.InterfaceUtil
 | Library | resources.libraries.python.DPDK.DPDKTools
-| ...
+|
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA
 | ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE
-| ...
-| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X710
-| Suite Teardown | Tear down DPDK 3-node performance topology
-| ...
-| Test template | Local template
-| ...
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_1024 | TXQ_SIZE_1024
+| ... | eth-l2xcbase-testpmd
+|
+| Suite Setup | Setup suite topology interfaces | performance | dpdk
+| Suite Teardown | Tear down suite | performance | dpdk
+|
+| Test Template | Local Template
+|
 | Documentation | *Raw results L2 routing test cases*
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\
 | ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\
-| ... | 2p10GE NIC X710 by Intel.
+| ... | ${nic_name}.\
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
 | ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
 | ... | Test packets are generated by TG on\
 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
 | ... | (flow-group per direction, 254 flows per flow-group) with\
 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
 
 *** Variables ***
-# X710 bandwidth limit
-| ${s_limit}= | ${10000000000}
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 1024
+| ${nic_txq_size}= | 1024
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
 # Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254
 
 *** Keywords ***
-| Local template
+| Local Template
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2 frame forwarding config.\
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${20000}
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${jumbo_frames}= | Set Variable If
-| | ... | ${get_framesize} < ${1522} | ${False} | ${True}
-| | ...
-| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames}
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Pre-initialize layer driver | ${nic_driver}
+| | When Start testpmd on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
 | | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrpdr
+| 64B-1c-eth-l2xcbase-testpmd-ndrpdr
 | | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
+| | frame_size=${64} | phy_cores=${1}
 
-| tc02-1518B-1t1c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc03-9000B-1t1c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| 64B-2c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
 
-| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| 64B-4c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
 
-| tc05-64B-2t2c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
+| 1518B-1c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
 
-| tc06-1518B-2t2c-eth-l2xcbase-testpmd-ndrpdr
+| 1518B-2c-eth-l2xcbase-testpmd-ndrpdr
 | | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc07-9000B-2t2c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
 
-| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| 1518B-4c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
 
-| tc09-64B-4t4c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
+| 9000B-1c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
 
-| tc10-1518B-4t4c-eth-l2xcbase-testpmd-ndrpdr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| 9000B-2c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
 
-| tc11-9000B-4t4c-eth-l2xcbase-testpmd-ndrpdr
+| 9000B-4c-eth-l2xcbase-testpmd-ndrpdr
 | | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-eth-l2xcbase-testpmd-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
 
-| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-ndrpdr
+| IMIX-4c-eth-l2xcbase-testpmd-ndrpdr
 | | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}