-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/shared/default.robot
| Resource | resources/libraries/robot/dpdk/default.robot
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.DPDK.DPDKTools
-| ...
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA
| ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH
-| ...
-| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X710
-| Suite Teardown | Tear down DPDK 3-node performance topology
-| ...
-| Test template | Local template
-| ...
-| Documentation | *Raw results IPv4 routing test cases*
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\
-| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 Niantic by Intel.
-| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\
-| ... | at line rate and reports total received/sent packets over trial period.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_1024 | TXQ_SIZE_1024
+| ... | ethip4-ip4base-l3fwd
+|
+| Suite Setup | Setup suite topology interfaces | performance | dpdk
+| Suite Teardown | Tear down suite | performance | dpdk
+| Test Setup | Start Test Export
+| Test Teardown | Finalize Test Export
+|
+| Test Template | Local Template
+|
+| Documentation | **Raw results IPv4 routing test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L3 IPv4 routing.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 run the DPDK l3fwd \
+| ... | application. DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
+| ... | payload. MAC addresses are matching MAC addresses of the TG node \
| ... | interfaces.
*** Variables ***
-# X710-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 1024
+| ${nic_txq_size}= | 1024
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst253_l3fwd
*** Keywords ***
-| Local template
+| Local Template
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config.\
+| | ... | - **[Cfg]** DUT runs L3 IPv4 routing config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${20000}
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${jumbo_frames}= | Set Variable If
-| | ... | ${get_framesize} < ${1522} | ${False} | ${True}
-| | ...
-| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames}
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Pre-initialize layer driver | ${nic_driver}
+| | When Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
*** Test Cases ***
-| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrpdr
+| 64B-1c-ethip4-ip4base-l3fwd-ndrpdr
| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
+| | frame_size=${64} | phy_cores=${1}
-| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| 64B-2c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
-| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| 64B-4c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
-| tc05-64B-2t2c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
+| 1518B-1c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
-| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-ndrpdr
+| 1518B-2c-ethip4-ip4base-l3fwd-ndrpdr
| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
-| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| 1518B-4c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
-| tc09-64B-4t4c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
+| 9000B-1c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
-| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-ndrpdr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| 9000B-2c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
-| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-ndrpdr
+| 9000B-4c-ethip4-ip4base-l3fwd-ndrpdr
| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4-ip4base-l3fwd-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-ndrpdr
+| IMIX-4c-ethip4-ip4base-l3fwd-ndrpdr
| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff