CSIT-1142 2-node topology - keywords DPDK

[csit.git] / tests / dpdk / perf / 40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot

diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot
index 5d5418c..0916d7d 100644 (file)
--- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot
+++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -30,7 +30,7 @@
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\
 | ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\
-| ... | 2p40GE NIC XL710 Niantic by Intel.
+| ... | 2p40GE NIC XL710 by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -56,12 +56,12 @@
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 100kpps.
 | | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 64B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${100000}
@@ -69,19 +69,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 1 | 1 | no
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${100000}
@@ -89,7 +89,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 1 | 1 | no
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -97,12 +97,12 @@
 
 | tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 1518B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -110,19 +110,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 1 | 1 | no
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -130,7 +130,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 1 | 1 | no
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -138,12 +138,12 @@
 
 | tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 9000B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${9000}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -151,19 +151,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L2FWD on all DUTs | 1 | 1 | yes
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${9000}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -171,7 +171,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L2FWD on all DUTs | 1 | 1 | yes
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -179,12 +179,12 @@
 
 | tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 100kpps.
 | | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 2C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${100000}
@@ -192,19 +192,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 2 | 1 | no
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${100000}
@@ -212,7 +212,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 2 | 1 | no
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -220,12 +220,12 @@
 
 | tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -233,19 +233,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 2 | 1 | no
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -253,7 +253,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 2 | 1 | no
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -261,12 +261,12 @@
 
 | tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${9000}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -274,19 +274,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L2FWD on all DUTs | 2 | 1 | yes
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${9000}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -294,7 +294,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L2FWD on all DUTs | 2 | 1 | yes
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -302,12 +302,12 @@
 
 | tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\
 | | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 100kpps.
 | | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 4C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${100000}
@@ -315,19 +315,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 4 | 2 | no
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\
 | | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${100000}
@@ -335,7 +335,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 4 | 2 | no
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -343,12 +343,12 @@
 
 | tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\
 | | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -356,19 +356,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 4 | 2 | no
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\
 | | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -376,7 +376,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L2FWD on all DUTs | 4 | 2 | no
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -384,12 +384,12 @@
 
 | tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\
 | | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${9000}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -397,19 +397,19 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes'
+| | Given Start L2FWD on all DUTs | 4 | 2 | yes
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\
+| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\
 | | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\
 | | ... | linerate, step 5kpps, LT=0.5%.
 | | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${9000}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -417,8 +417,8 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes'
+| | Given Start L2FWD on all DUTs | 4 | 2 | yes
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
\ No newline at end of file
+| | ... | ${perf_pdr_loss_acceptance_type}