| Resource | resources/libraries/robot/honeycomb/port_mirroring.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
| Resource | resources/libraries/robot/testing_path.robot
| Resource | resources/libraries/robot/telemetry/span.robot
-| Variables | resources/test_data/honeycomb/spanrx-apihc-apivat.py
-| ... | ${node} | ${node['interfaces']['port1']['name']}
-| ... | ${node['interfaces']['port3']['name']} | local0
+| Variables | resources/test_data/honeycomb/span.py
+| ... | ${node['interfaces']['port1']['name']}
+| ... | ${node['interfaces']['port3']['name']}
+| ... | local0
+| Variables | resources/test_data/honeycomb/sub_interfaces.py
| Force Tags | HC_FUNC
| Suite Setup | Add Interface local0 To Topology | ${node}
| Suite Teardown | Restart Honeycomb and VPP | ${node}
| Documentation | *Honeycomb port mirroring test suite.*
*** Test Cases ***
-| TC01: Honeycomb can configure SPAN on an interface receive
+| TC01: Honeycomb can configure SPAN on an interface - receive
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state receive.
| | ...
| | When Honeycomb Configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_1}
-| | Then Interface SPAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface1} | ${settings_1}
+| | ... | ${node} | ${interface1} | ${settings_receive}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_receive}
-| TC02: Honeycomb can configure SPAN on an interface transmit
+| TC02: Honeycomb can configure SPAN on an interface - transmit
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state transmit.
| | ...
| | When Honeycomb Configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_2}
-| | Then Interface SPAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface1} | ${settings_2}
+| | ... | ${node} | ${interface1} | ${settings_transmit}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_transmit}
-| TC03: Honeycomb can configure SPAN on an interface both
+| TC03: Honeycomb can configure SPAN on an interface - both
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state both.
| | ...
| | When Honeycomb Configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_3}
-| | Then Interface SPAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface1} | ${settings_3}
+| | ... | ${node} | ${interface1} | ${settings_both}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_both}
-| TC04: Honeycomb can configure SPAN on two interfaces
+| TC04: Honeycomb can configure SPAN on an interface with two source interfaces
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state both.
| | ...
| | When Honeycomb Configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_2} | ${settings_4}
-| | Then Interface SPAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface1} | ${settings_2} | ${settings_4}
+| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
| TC05: Honeycomb can disable SPAN on interface
| | [Documentation] | Honeycomb removes existing SPAN configuration
-| | ... | on interface.
+| | ... | from interface.
| | ...
-| | Given Interface SPAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface1} | ${settings_2} | ${settings_4}
+| | Given Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
| | When Honeycomb removes interface SPAN configuration
| | ... | ${node} | ${interface1}
-| | Then Interface SPAN Operational Data From Honeycomb Should Be empty
+| | Then Interface SPAN Operational Data from Honeycomb should be empty
| | ... | ${node} | ${interface1}
-| TC06: DUT mirrors IPv4 packets from one interface to another
-| | [TearDown] | Show Packet Trace on All DUTs | ${nodes}
+| TC06: Honeycomb can configure SPAN with two destination interfaces from the same source
+| | [Documentation] | Honeycomb configures SPAN on two interfaces and verifies
+| | ... | against VPP SPAN dump.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes interface SPAN configuration
+| | ... | ${node} | ${interface1} | AND
+| | ... | Honeycomb removes interface SPAN configuration
+| | ... | ${node} | ${interface2}
+| | When Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${interface1} | ${settings_if2}
+| | And Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${interface2} | ${settings_if2}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_if2}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface2} | ${settings_if2}
+
+| TC07: DUT mirrors IPv4 packets from one interface to another
| | [Documentation]
| | ... | [Top] TG=DUT1
| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\
| | ... | then receive a copy of sent packet and of DUT's ARP reply\
| | ... | on the second interface.
| | ...
-| | Path for 2-node testing is set
+| | [Teardown] | Run Keywords
+| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
+| | ... | Honeycomb clears all interface ipv4 neighbors
+| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
+| | ... | Honeycomb removes interface ipv4 addresses
+| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
+| | ... | Honeycomb removes interface SPAN configuration
+| | ... | ${node} | ${dut_to_tg_if2}
+| | Given Path for 2-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix}
-| | Add ARP on DUT
-| | ... | ${node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip}
-| | ... | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac}
| | ${settings_5}= | create dictionary | state=both
| | ... | iface-ref=${dut_to_tg_if1}
-| | InterfaceCLI.All Vpp Interfaces Ready Wait | ${nodes}
+| | And InterfaceCLI.All Vpp Interfaces Ready Wait | ${nodes}
| | When Honeycomb Configures SPAN on interface
| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5}
| | Then Send Packet And Check Received Copies | ${tg_node}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2}
| | ... | ${tg_to_dut_if1_ip} | ${dut_to_tg_if1_ip} | ICMP
+
+| TC08: Honeycomb can configure SPAN on a sub-interface - receive
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state receive.
+| | ...
+| | Given Honeycomb creates sub-interface | ${node} | ${interface1}
+| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings}
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_receive}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_receive}
+
+| TC09: Honeycomb can configure SPAN on a sub-interface - transmit
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state transmit.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit}
+
+| TC10: Honeycomb can configure SPAN on a sub-interface - both
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state both.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both}
+
+| TC11: Honeycomb can configure SPAN on a sub-interface with two source interfaces
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state both.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
+
+| TC12: Honeycomb can disable SPAN on interface
+| | [Documentation] | Honeycomb removes existing SPAN configuration
+| | ... | from sub-interface.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | Given sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
+| | When Honeycomb removes sub-interface SPAN configuration
+| | ... | ${node} | ${interface1} | ${1}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be empty
+| | ... | ${node} | ${interface1} | ${1}
+
+| TC13: Honeycomb can configure SPAN with two destination sub-interfaces from the same source
+| | [Documentation] | Honeycomb configures SPAN on two sub-interfaces
+| | ... | and verifies against VPP SPAN dump.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes sub-interface SPAN configuration
+| | ... | ${node} | ${interface1} | ${1} | AND
+| | ... | Honeycomb removes sub-interface SPAN configuration
+| | ... | ${node} | ${interface2} | ${1}
+| | Given Honeycomb creates sub-interface | ${node} | ${interface2}
+| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings}
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_if2}
+| | And Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface2} | ${1} | ${settings_if2}
+| | Then Sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_if2}
+| | Then Sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface2} | ${1} | ${settings_if2}
+
+| TC14: DUT mirrors IPv4 packets from one interface to another
+| | [Documentation]
+| | ... | [Top] TG=DUT1
+| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\
+| | ... | mirroring from one DUT interface to a sub-interface on the other\
+| | ... | interface.
+| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\
+| | ... | then receive a copy of sent packet and of DUT's ARP reply\
+| | ... | on the sub-interface.
+| | ...
+| | [Teardown] | Show Packet Trace on All DUTs | ${nodes}
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Sub-interface state from Honeycomb should be
+| | ... | ${dut_node} | ${interface1} | ${1} | down | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets the sub-interface up
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1}
+| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix}
+| | And And Honeycomb adds interface ipv4 neighbor
+| | ... | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac}
+| | ${settings_5}= | create dictionary | state=both
+| | ... | iface-ref=${dut_to_tg_if2}
+| | And InterfaceCLI.All Vpp Interfaces Ready Wait | ${nodes}
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${dut_to_tg_if1} | ${1} | ${settings_5}
+| | Then Send Packet And Check Received Copies | ${tg_node}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
+| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2_ip} | ${dut_to_tg_if2_ip} | ICMP
Code Review / csit.git / blobdiff