CSIT-576 HC Test: Improve SPAN test coverage
[csit.git] / tests / func / honeycomb / mgmt-cfg-spanrx-apihc-apivat-func.robot
index ff72f95..1cc385c 100644 (file)
 | Resource | resources/libraries/robot/honeycomb/port_mirroring.robot
 | Resource | resources/libraries/robot/honeycomb/interfaces.robot
 | Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-# Test suite out of date since https://gerrit.fd.io/r/4272
-# | Force Tags | honeycomb_sanity
+| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/telemetry/span.robot
+| Variables | resources/test_data/honeycomb/span.py
+| ... | ${node['interfaces']['port1']['name']}
+| ... | ${node['interfaces']['port3']['name']}
+| ... | local0
+| Variables | resources/test_data/honeycomb/sub_interfaces.py
+| Force Tags | HC_FUNC
 | Suite Setup | Add Interface local0 To Topology | ${node}
-| Suite Teardown | Run Keyword If Any Tests Failed
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| Suite Teardown | Restart Honeycomb and VPP | ${node}
 | Documentation | *Honeycomb port mirroring test suite.*
-| ...
-| ... | Test suite uses the first interface of the first DUT node.
-
-*** Variables ***
-| ${interface1}= | ${node['interfaces']['port1']['name']}
-| ${interface2}= | ${node['interfaces']['port3']['name']}
-| ${interface3}= | local0
 
 *** Test Cases ***
-# TODO: Add verification once operational data is available (HONEYCOMB-306)
-| TC01: Honeycomb can configure SPAN on an interface
-| | [Documentation] | Honeycomb configures SPAN on interface and verifies/
-| | ... | against VPP SPAN dump.
-| | Given SPAN configuration from VAT should not exist
-| | ... | ${node}
+| TC01: Honeycomb can configure SPAN on an interface - receive
+| | [Documentation] | Honeycomb configures SPAN on interface and verifies
+| | ... | against VPP SPAN dump in state receive.
+| | ...
+| | When Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${interface1} | ${settings_receive}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_receive}
+
+| TC02: Honeycomb can configure SPAN on an interface - transmit
+| | [Documentation] | Honeycomb configures SPAN on interface and verifies
+| | ... | against VPP SPAN dump in state transmit.
+| | ...
+| | When Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${interface1} | ${settings_transmit}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_transmit}
+
+| TC03: Honeycomb can configure SPAN on an interface - both
+| | [Documentation] | Honeycomb configures SPAN on interface and verifies
+| | ... | against VPP SPAN dump in state both.
+| | ...
+| | When Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${interface1} | ${settings_both}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_both}
+
+| TC04: Honeycomb can configure SPAN on an interface with two source interfaces
+| | [Documentation] | Honeycomb configures SPAN on interface and verifies
+| | ... | against VPP SPAN dump in state both.
+| | ...
 | | When Honeycomb Configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${interface2}
-| | Then Interface SPAN configuration from VAT should be
-| | ... | ${node} | ${interface1} | ${interface2}
+| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
 
-| TC02: Honeycomb can disable SPAN on interface
-| | [Documentation] | Honeycomb removes existing SPAN configuration\
-| | ... | on interface and verifies against VPP SPAN dump.
-| | Given Interface SPAN configuration from VAT should be
-| | ... | ${node} | ${interface1} | ${interface2}
+| TC05: Honeycomb can disable SPAN on interface
+| | [Documentation] | Honeycomb removes existing SPAN configuration
+| | ... | from interface.
+| | ...
+| | Given Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
 | | When Honeycomb removes interface SPAN configuration
 | | ... | ${node} | ${interface1}
-| | Then SPAN configuration from VAT should not exist
-| | ... | ${node}
+| | Then Interface SPAN Operational Data from Honeycomb should be empty
+| | ... | ${node} | ${interface1}
 
-| TC03: Honeycomb can configure SPAN on one interface to mirror two interfaces
-| | [Documentation] | Honeycomb configures SPAN on interface, mirroring\
-| | ... | two interfaces at the same time. Then verifies against VPP SPAN dump.
-| | [Teardown] | Honeycomb removes interface SPAN configuration
-| | ... | ${node} | ${interface1}
-| | Given SPAN configuration from VAT should not exist
-| | ... | ${node}
+| TC06: Honeycomb can configure SPAN with two destination interfaces from the same source
+| | [Documentation] | Honeycomb configures SPAN on two interfaces and verifies
+| | ... | against VPP SPAN dump.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes interface SPAN configuration
+| | ... | ${node} | ${interface1} | AND
+| | ... | Honeycomb removes interface SPAN configuration
+| | ... | ${node} | ${interface2}
 | | When Honeycomb Configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${interface2} | ${interface3}
-| | Then Interface SPAN configuration from VAT should be
-| | ... | ${node} | ${interface1} | ${interface2} | ${interface3}
+| | ... | ${node} | ${interface1} | ${settings_if2}
+| | And Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${interface2} | ${settings_if2}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${settings_if2}
+| | Then Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface2} | ${settings_if2}
+
+| TC07: DUT mirrors IPv4 packets from one interface to another
+| | [Documentation]
+| | ... | [Top] TG=DUT1
+| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\
+| | ... | mirroring from one DUT interface to the other.
+| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\
+| | ... | then receive a copy of sent packet and of DUT's ARP reply\
+| | ... | on the second interface.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
+| | ... | Honeycomb clears all interface ipv4 neighbors
+| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
+| | ... | Honeycomb removes interface ipv4 addresses
+| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
+| | ... | Honeycomb removes interface SPAN configuration
+| | ... | ${node} | ${dut_to_tg_if2}
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix}
+| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac}
+| | ${settings_5}= | create dictionary | state=both
+| | ... | iface-ref=${dut_to_tg_if1}
+| | And InterfaceCLI.All Vpp Interfaces Ready Wait | ${nodes}
+| | When Honeycomb Configures SPAN on interface
+| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5}
+| | Then Send Packet And Check Received Copies | ${tg_node}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2}
+| | ... | ${tg_to_dut_if1_ip} | ${dut_to_tg_if1_ip} | ICMP
+
+| TC08: Honeycomb can configure SPAN on a sub-interface - receive
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state receive.
+| | ...
+| | Given Honeycomb creates sub-interface | ${node} | ${interface1}
+| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings}
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_receive}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_receive}
+
+| TC09: Honeycomb can configure SPAN on a sub-interface - transmit
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state transmit.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit}
+
+| TC10: Honeycomb can configure SPAN on a sub-interface - both
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state both.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both}
+
+| TC11: Honeycomb can configure SPAN on a sub-interface with two source interfaces
+| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
+| | ... | against VPP SPAN dump in state both.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
+
+| TC12: Honeycomb can disable SPAN on interface
+| | [Documentation] | Honeycomb removes existing SPAN configuration
+| | ... | from sub-interface.
+| | ...
+| | Given Sub-interface state from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | down | up
+| | Given sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
+| | When Honeycomb removes sub-interface SPAN configuration
+| | ... | ${node} | ${interface1} | ${1}
+| | Then sub-Interface SPAN Operational Data from Honeycomb should be empty
+| | ... | ${node} | ${interface1} | ${1}
+
+| TC13: Honeycomb can configure SPAN with two destination sub-interfaces from the same source
+| | [Documentation] | Honeycomb configures SPAN on two sub-interfaces
+| | ... | and verifies against VPP SPAN dump.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes sub-interface SPAN configuration
+| | ... | ${node} | ${interface1} | ${1} | AND
+| | ... | Honeycomb removes sub-interface SPAN configuration
+| | ... | ${node} | ${interface2} | ${1}
+| | Given Honeycomb creates sub-interface | ${node} | ${interface2}
+| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings}
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface1} | ${1} | ${settings_if2}
+| | And Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${interface2} | ${1} | ${settings_if2}
+| | Then Sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface1} | ${1} | ${settings_if2}
+| | Then Sub-Interface SPAN Operational Data from Honeycomb should be
+| | ... | ${node} | ${interface2} | ${1} | ${settings_if2}
+
+| TC14: DUT mirrors IPv4 packets from one interface to another
+| | [Documentation]
+| | ... | [Top] TG=DUT1
+| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\
+| | ... | mirroring from one DUT interface to a sub-interface on the other\
+| | ... | interface.
+| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\
+| | ... | then receive a copy of sent packet and of DUT's ARP reply\
+| | ... | on the sub-interface.
+| | ...
+| | [Teardown] | Show Packet Trace on All DUTs | ${nodes}
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Sub-interface state from Honeycomb should be
+| | ... | ${dut_node} | ${interface1} | ${1} | down | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets the sub-interface up
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1}
+| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix}
+| | And And Honeycomb adds interface ipv4 neighbor
+| | ... | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac}
+| | ${settings_5}= | create dictionary | state=both
+| | ... | iface-ref=${dut_to_tg_if2}
+| | And InterfaceCLI.All Vpp Interfaces Ready Wait | ${nodes}
+| | When Honeycomb Configures SPAN on sub-interface
+| | ... | ${node} | ${dut_to_tg_if1} | ${1} | ${settings_5}
+| | Then Send Packet And Check Received Copies | ${tg_node}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
+| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2_ip} | ${dut_to_tg_if2_ip} | ICMP

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.