Func test reorg - decrease exec time per vpp patch

[csit.git] / tests / func / ipv6 / eth2p-ethip6-ip6base-func.robot

diff --git a/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot b/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
index 4eed078..d08c291 100644 (file)
--- a/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
+++ b/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
@@ -18,7 +18,7 @@
 | Resource | resources/libraries/robot/counters.robot
 | Resource | resources/libraries/robot/default.robot
 | Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
-| Force Tags | HW_ENV
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | SKIP_VPP_PATCH
 | Suite Setup | Run Keywords
 | ... | Setup ipv6 to all dut in topology | ${nodes} | ${nodes_ipv6_addr} | AND
 | ... | Vpp nodes ra suppress link layer | ${nodes} | AND
@@ -45,18 +45,18 @@
 
 *** Test Cases ***
 | TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
 | | ... | verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 icmp echo | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
 
 | TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
 | | ... | incrementating frame size from 64B to 1500B with increment step
 | | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
 
 | TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
@@ -64,7 +64,6 @@
 | | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
 | | ... | incrementating frame size from 1500B to 9000B with increment
 | | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
 | | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
 | | [Teardown] | Run keywords
 | | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
@@ -81,41 +80,41 @@
 | | ...            | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
 
 | TC04: DUT routes to its egress interface
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
 | | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 tg to dut1 egress | ${nodes['TG']} | ${nodes['DUT1']} |
 | | ...                    | ${nodes['DUT2']} | ${nodes_ipv6_addr}
 
 | TC05: DUT1 routes to DUT2 ingress interface
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
 | | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 tg to dut2 via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
 | | ...                      | ${nodes['DUT2']} | ${nodes_ipv6_addr}
 
 | TC06: DUT1 routes to DUT2 egress interface
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
 | | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 tg to dut2 egress via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
 | | ...                             | ${nodes['DUT2']} | ${nodes_ipv6_addr}
 
 | TC07: DUT1 and DUT2 route between TG interfaces
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
 | | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
 | | ...                  | ${nodes_ipv6_addr}
 
 | TC08: DUT replies to IPv6 Neighbor Solicitation
+| | [Tags] | VM_ENV
 | | [Documentation]
 | | ... | On DUT configure interface IPv6 address in the main routing\
 | | ... | domain. Make TG send Neighbor Solicitation message on the link
 | | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
 | | Ipv6 neighbor solicitation | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}