--- /dev/null
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Resource | resources/libraries/robot/lisp/lispgpe.robot
+| Resource | resources/libraries/robot/bridge_domain.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Library | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.VhostUser
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.VPPUtil
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
+| ... | VM_ENV | HW_ENV
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *LISP static adjacency test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
+| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
+| ... | routing and static routes. LISPoIPv4 tunnel is configured\
+| ... | between DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv6 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP tunnel between them; verify IPv6 headers on received\
+| | ... | packets are correct.
+| | ... | [Cfg2] Reconf LISP.
+| | ... | [Ver2] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And IP addresses are set on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4}
+| | ... | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
+| | ... | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4}
+| | ... | ${dut2_node} | ${dut2_to_tg}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
+| | And Add IP Neighbors
+| | When Set up Lisp topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node}
+| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
+| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip6o4}
+| | ... | ${dut2_to_dut1_ip6o4_reconf} | ${dut_prefix6o4}
+| | ... | ${dut1_ip6o4_static_adjacency}
+| | ... | ${dut1_ip6o4_static_adjacency_reconf}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+*** Keywords ***
+| Add IP Neighbors
+| | [Documentation]
+| | ... | Add IP neighbors to physical interfaces on DUTs.\
+| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0.
+| | ...
+| | [Arguments] | ${fib_id}=0
+| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4}
+| | ... | ${tg_to_dut1_mac} | ${fib_id}
+| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4}
+| | ... | ${tg_to_dut2_mac} | ${fib_id}
+| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_dut1_mac}
+| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4}
+| | ... | ${dut1_to_dut2_mac}
Code Review / csit.git / blobdiff