CSIT-662: KWI - KW renaming

[csit.git] / tests / func / lisp / eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot

diff --git a/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot
index c470b3c..66c8a58 100644 (file)
--- a/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot
+++ b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot
@@ -38,14 +38,14 @@
 | Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipsec_ipv6.py
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH
 | ...
-| Test Setup | Run Keywords | Func Test Setup
+| Test Setup | Run Keywords | Set up functional test
 | ...        | AND          | Vpp All Ra Suppress Link Layer | ${nodes}
 | Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
 | ... | AND | Show VAT History On All DUTs | ${nodes}
 | ... | AND | Show Vpp Settings | ${nodes['DUT1']}
 | ... | AND | Show Vpp Settings | ${nodes['DUT2']}
-| ... | AND | Stop and Clear QEMU | ${nodes['DUT1']} | ${vm_node}
-| ... | AND | Check VPP PID in Teardown
+| ... | AND | Stop and clear QEMU | ${nodes['DUT1']} | ${vm_node}
+| ... | AND | Verify VPP PID in Teardown
 | ...
 | Documentation | *IPv6 - ip6-ipsec-lispgpe-ip6 - main fib,
 | ... | vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp*
@@ -90,26 +90,26 @@
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Setup Topology
 | | And Setup Qemu DUT1
-| | And Set up LISP GPE topology
+| | And Configure LISP GPE topology in 3-node circular topology
 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_to_dut2_ip6_static_adjacency}
 | | ... | ${dut2_to_dut1_ip6_static_adjacency}
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | When VPP Setup IPsec Manual Keyed Connection
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | When Configure manual keyed connection for IPSec
 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
 | | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
 | | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
-| | And VPP Setup IPsec Manual Keyed Connection
+| | And Configure manual keyed connection for IPSec
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
 | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
 | | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
-| | Then Send Packet And Check Headers
+| | Then Send packet and verify headers
 | | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
 | | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
 | | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
+| | And Send packet and verify headers
 | | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
 | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
 | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
@@ -131,7 +131,7 @@
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Setup Topology
 | | And Setup Qemu DUT1
-| | And Set up LISP GPE topology
+| | And Configure LISP GPE topology in 3-node circular topology
 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
@@ -141,29 +141,29 @@
 | | ... | ${dut1_node} | lisp_gpe0
 | | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index
 | | ... | ${dut2_node} | lisp_gpe0
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | When VPP Setup IPsec Manual Keyed Connection
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | When Configure manual keyed connection for IPSec
 | | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key}
 | | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
 | | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
-| | And VPP Setup IPsec Manual Keyed Connection
+| | And Configure manual keyed connection for IPSec
 | | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key}
 | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
 | | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
-| | Then Send Packet And Check Headers
+| | Then Send packet and verify headers
 | | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
 | | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
 | | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
+| | And Send packet and verify headers
 | | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
 | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
 | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
 
 *** Keywords ***
 | Setup Topology
-| | Path for 3-node testing is set
+| | Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | Interfaces in 3-node path are up
+| | Set interfaces in 3-node circular topology up
 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
 | | ... | ${prefix6}
 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
@@ -194,11 +194,11 @@
 | | Set Interface State | ${dut1_node} | ${vhost1} | up
 | | Set Interface State | ${dut1_node} | ${vhost2} | up
 | | Vpp RA Suppress Link Layer | ${dut1_node} | ${vhost2}
-| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE}
-| | Interface is added to bridge domain | ${dut1_node}
+| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE}
+| | Add interface to bridge domain | ${dut1_node}
 | | ... | ${dut1_to_tg} | ${bid} | 0
-| | Interface is added to bridge domain | ${dut1_node}
+| | Add interface to bridge domain | ${dut1_node}
 | | ... | ${vhost1} | ${bid} | 0
 | | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
 | | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
-| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2}
+| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2}