| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.Trace
| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.LispUtil
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.VhostUser
| Resource | resources/libraries/robot/traffic.robot
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/interfaces.robot
| Resource | resources/libraries/robot/testing_path.robot
| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/vrf.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Resource | resources/libraries/robot/bridge_domain.robot
| Resource | resources/libraries/robot/lisp/lispgpe.robot
# Import configuration and test data:
| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py
| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | EXPECTED_FAILING
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
| ...
| Test Setup | Run Keywords | Setup all DUTs before test
| ... | AND | Setup all TGs before traffic script
| ...
| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
+| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
-| ... | both directions by TG on links to DUT1 and DUT2; on receive
-| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\
+| ... | both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\
| ... | and MAC addresses.
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Test Cases ***
| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces
| | [Documentation]
-| | ... | Case: ip4-lispgpe-ip4 - phy2lisp \
| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
| | ... | TG-DUTn.
| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on received
-| | ... | packets are correct.
+| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
+| | ... | received packets are correct.
| | ... | [Ref] RFC6830.
| | ...
| | Given Path for 3-node testing is set
| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
| | [Documentation]
-| | ... | Case: ip4-lispgpe-ip4 - vrf, phy2lisp \
| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
| | ... | TG-DUTn.
| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on received
-| | ... | packets are correct.
+| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, phy2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
+| | ... | received packets are correct.
| | ... | [Ref] RFC6830.
| | ...
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | VPP Show Errors | ${nodes['DUT1']}
+| | ... | AND | VPP Show Errors | ${nodes['DUT2']}
+| | ... | AND | Run keyword if test passed | Fail
+| | ...
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
+| | And Set up LISP GPE topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_to_dut2_ip4_static_adjacency}
+| | ... | ${dut2_to_dut1_ip4_static_adjacency}
+| | And IP addresses are set on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
| | When Setup VRF on DUT | ${dut1_node} | ${dut1_fib_table} | ${dut1_to_dut2}
| | ... | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac} | ${tg2_ip4} | ${dut1_to_tg}
| | ... | ${tg1_ip4} | ${tg_to_dut1_mac} | ${prefix4}
| | And Setup VRF on DUT | ${dut2_node} | ${dut2_fib_table} | ${dut2_to_dut1}
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac} | ${tg1_ip4} | ${dut2_to_tg}
| | ... | ${tg2_ip4} | ${tg_to_dut2_mac} | ${prefix4}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
+| | ... | [Ver] Case: ip4-lispgpe-ip4 - main fib, virt2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
+| | ... | received packets are correct.
+| | ...
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | VPP Show Errors | ${nodes['DUT1']}
+| | ... | AND | VPP Show Errors | ${nodes['DUT2']}
+| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node}
+| | ...
+| | [Tags] | EXPECTED_FAILING
+| | ...
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
| | And IP addresses are set on interfaces
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up LISP GPE topology
+| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
+| | ... | ${tg_to_dut2_mac}
+| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_dut1_mac}
+| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
+| | ... | ${dut1_to_dut2_mac}
+| | When Set up LISP GPE topology
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_to_dut2_ip4_static_adjacency}
| | ... | ${dut2_to_dut1_ip4_static_adjacency}
+| | And Setup Qemu DUT1
| | Then Send Packet And Check Headers
| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
| | And Send Packet And Check Headers
| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-*** Keywords ***
-| Setup VRF on DUT
+| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled
| | [Documentation]
-| | ... | The keyword sets a FIB table on a DUT, assigns two interfaces to it,\
-| | ... | adds two ARP items and a route, see example.
-| | ...
-| | ... | *Example:*
-| | ... | Three-node topology:
-| | ... | TG_if1 - DUT1_if1-DUT1_if2 - DUT2_if1-DUT2_if2 - TG_if2
-| | ... | Create one VRF on each DUT:
-| | ... | \| Setup VRF on DUT \| ${dut1_node} \| ${dut1_fib_table} \
-| | ... | \| ${dut1_to_dut2} \| ${dut2_to_dut1_ip4} \| ${dut2_to_dut1_mac} \
-| | ... | \| ${tg2_ip4} \| ${dut1_to_tg} \| ${tg1_ip4} \| ${tg_to_dut1_mac} \
-| | ... | \| 24 \|
-| | ... | \| Setup VRF on DUT \| ${dut2_node} \| ${dut2_fib_table} \
-| | ... | \| ${dut2_to_dut1} \| ${dut1_to_dut2_ip4} \| ${dut1_to_dut2_mac} \
-| | ... | \| ${tg1_ip4} \| ${dut2_to_tg} \| ${tg2_ip4} \| ${tg_to_dut2_mac} \
-| | ... | \| 24 \|
-| | ...
-| | [Arguments]
-| | ... | ${node} | ${table} | ${route_interface} | ${route_gateway_ip}
-| | ... | ${route_gateway_mac} | ${route_dst_ip} | ${vrf_src_if} | ${src_if_ip}
-| | ... | ${src_if_mac} | ${prefix_len}
-| | ...
-| | ${route_interface_idx}= | Get Interface SW Index
-| | ... | ${node} | ${route_interface}
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
+| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, virt2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
+| | ... | received packets are correct.
+| | ... | [Ref] RFC6830.
| | ...
-| | Add fib table | ${node}
-| | ... | ${route_dst_ip} | ${prefix_len} | ${table}
-| | ... | via ${route_gateway_ip} sw_if_index ${route_interface_idx} multipath
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | VPP Show Errors | ${nodes['DUT1']}
+| | ... | AND | VPP Show Errors | ${nodes['DUT2']}
+| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node}
| | ...
-| | Assign Interface To Fib Table
-| | ... | ${node} | ${route_interface} | ${table}
-| | Assign Interface To Fib Table
-| | ... | ${node} | ${vrf_src_if} | ${table}
+| | [Tags] | EXPECTED_FAILING
| | ...
-| | Add Arp On Dut | ${node} | ${vrf_src_if}
-| | ... | ${src_if_ip} | ${src_if_mac} | vrf=${table}
-| | Add Arp On Dut | ${node} | ${route_interface}
-| | ... | ${route_gateway_ip} | ${route_gateway_mac} | vrf=${table}
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | When Setup VRF on DUT | ${dut1_node} | ${dut1_fib_table} | ${dut1_to_dut2}
+| | ... | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac} | ${tg2_ip4} | ${dut1_to_tg}
+| | ... | ${tg1_ip4} | ${tg_to_dut1_mac} | ${prefix4}
+| | And Setup VRF on DUT | ${dut2_node} | ${dut2_fib_table} | ${dut2_to_dut1}
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac} | ${tg1_ip4} | ${dut2_to_tg}
+| | ... | ${tg2_ip4} | ${tg_to_dut2_mac} | ${prefix4}
+| | And IP addresses are set on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up LISP GPE topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_to_dut2_ip4_static_adjacency}
+| | ... | ${dut2_to_dut1_ip4_static_adjacency}
+| | And Setup Qemu DUT1
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+*** Keywords ***
+| Setup Qemu DUT1
+| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\
+| | ... | Qemu and bridge the vhosts.
| | ...
-| | Vpp Route Add | ${node} | ${route_dst_ip} | ${prefix_len}
-| | ... | ${route_gateway_ip} | ${route_interface} | vrf=${table}
+| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
+| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
+| | Set Interface State | ${dut1_node} | ${vhost1} | up
+| | Set Interface State | ${dut1_node} | ${vhost2} | up
+| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE}
+| | Interface is added to bridge domain | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${bid} | 0
+| | Interface is added to bridge domain | ${dut1_node}
+| | ... | ${vhost1} | ${bid} | 0
+| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
+| | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
+| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2}