| Resource | resources/libraries/robot/l2_traffic.robot
| Library | resources.libraries.python.Trace
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
| Resource | resources/libraries/robot/l2_traffic.robot
| Library | resources.libraries.python.Trace
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
| Documentation | *L2XC with VLAN tag rewrite test cases - translate-1-2*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| Documentation | *L2XC with VLAN tag rewrite test cases - translate-1-2*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | tagged with one Dot1q tag from one of its interfaces to another one
| | ... | via DUT1 and DUT2; verify that packet is received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | ... | tagged with one Dot1q tag from one of its interfaces to another one
| | ... | via DUT1 and DUT2; verify that packet is received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links
| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links
| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links
| | ... | to another one via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
| | ... | to another one via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| TC05: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links
| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| TC05: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links
| | ... | tagegd with one Dot1q tag from one of its interfaces to another one
| | ... | via DUT1 and DUT2; verify that packet is received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | ... | tagegd with one Dot1q tag from one of its interfaces to another one
| | ... | via DUT1 and DUT2; verify that packet is received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1}
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
| | ... | via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | to another one via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
| | ... | to another one via DUT1 and DUT2; verify that packet is not received.
| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
| | [Tags] | SKIP_PATCH
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
| | ... | type_subif=two_tags dot1ad
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}
| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
| | ... | vlan1=${outer_vlan_id1}