CSIT-662: KWI - KW renaming

[csit.git] / tests / perf / 10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot

diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
index 1e2cfba..3152a38 100644 (file)
--- a/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
+++ b/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
@@ -22,12 +22,12 @@
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST
 | ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance ndrchk test teardown
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance ndrchk test
 | ...
 | Documentation | *Reference NDR throughput IPv4 whitelist verify test cases*
 | ...
@@ -50,6 +50,10 @@
 | ... | TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
+*** Variables ***
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -57,14 +61,14 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
 | | ... | at 2x 4.1mpps.
-| | [Tags] | 1T1C | STHREAD
+| | [Tags] | 64B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${64}
 | | ${rate}= | Set Variable | 4.1mpps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -72,7 +76,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -80,14 +84,14 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 1518 Byte frames using single trial throughput test
 | | ... | at 2x 812743pps.
-| | [Tags] | 1T1C | STHREAD
+| | [Tags] | 1518B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -95,7 +99,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -103,13 +107,13 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 9000 Byte frames using single trial throughput test
 | | ... | at 2x 138580pps.
-| | [Tags] | 1T1C | STHREAD
+| | [Tags] | 9000B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -117,7 +121,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc04-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -125,14 +129,14 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
 | | ... | at 2x 7.2mpps.
-| | [Tags] | 2T2C | MTHREAD
+| | [Tags] | 64B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${64}
 | | ${rate}= | Set Variable | 7.2mpps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -140,7 +144,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc05-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -148,14 +152,14 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 1518 Byte frames using single trial throughput test
 | | ... | at 2x 812743pps.
-| | [Tags] | 2T2C | MTHREAD
+| | [Tags] | 1518B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -163,7 +167,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc06-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -171,13 +175,13 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 9000 Byte frames using single trial throughput test
 | | ... | at 2x 138580pps.
-| | [Tags] | 2T2C | MTHREAD
+| | [Tags] | 9000B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -185,7 +189,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc07-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -193,14 +197,14 @@
 | | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
 | | ... | at 2x 10.4mpps.
-| | [Tags] | 4T4C | MTHREAD
+| | [Tags] | 64B | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | ${64}
 | | ${rate}= | Set Variable | 10.4mpps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -208,7 +212,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc08-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -216,14 +220,14 @@
 | | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 1518 Byte frames using single trial throughput test
 | | ... | at 2x 812743pps.
-| | [Tags] | 4T4C | MTHREAD
+| | [Tags] | 1518B | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -231,7 +235,7 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc09-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
 | | [Documentation]
@@ -239,13 +243,13 @@
 | | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 9000 Byte frames using single trial throughput test
 | | ... | at 2x 138580pps.
-| | [Tags] | 4T4C | MTHREAD
+| | [Tags] | 9000B | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
 | | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
@@ -253,4 +257,4 @@
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${framesize} | ${traffic_profile}