-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.5mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc04-64B-2t2c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.5mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.5mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc07-64B-4t4c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
Code Review / csit.git / blobdiff