CSIT-524: Traffic generator using python profiles

[csit.git] / tests / perf / 10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot

diff --git a/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot
index f3bcac2..27739e9 100644 (file)
--- a/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot
+++ b/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot
@@ -62,6 +62,8 @@
 *** Variables ***
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4udp-1u15p
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
@@ -73,7 +75,7 @@
 | | ... | linerate, step 100kpps.
 | | ...
 | | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
-| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p
+| | ... | ${framesize} | ${traffic_profile}
 | | ... | AND | Show SNAT verbose | ${dut1}
 | | ... | AND | Show SNAT verbose | ${dut2}
 | | ...
@@ -92,8 +94,8 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When SNAT is initialized in a 3-node circular topology
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc02-64B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
 | | [Documentation]
@@ -104,7 +106,7 @@
 | | ... | linerate, step 100kpps.
 | | ...
 | | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
-| | ... | 3-node-IPv4-SNAT-1u-15p
+| | ... | ${traffic_profile}
 | | ...
 | | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | ...
@@ -121,8 +123,8 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When SNAT is initialized in a 3-node circular topology
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
 | tc03-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
@@ -134,7 +136,7 @@
 | | ... | linerate, step 100kpps.
 | | ...
 | | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
-| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p
+| | ... | ${framesize} | ${traffic_profile}
 | | ... | AND | Show SNAT verbose | ${dut1}
 | | ... | AND | Show SNAT verbose | ${dut2}
 | | ...
@@ -153,8 +155,8 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When SNAT is initialized in a 3-node circular topology
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | ... | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc04-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
 | | [Documentation]
@@ -165,7 +167,7 @@
 | | ... | linerate, step 100kpps.
 | | ...
 | | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
-| | ... | 3-node-IPv4-SNAT-1u-15p
+| | ... | ${traffic_profile}
 | | ...
 | | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | ...
@@ -182,24 +184,26 @@
 | | And Apply startup configuration on all VPP DUTs
 | | When SNAT is initialized in a 3-node circular topology
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
 | | ... | ${perf_pdr_loss_acceptance_type}
 
-| tc05-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
+| tc05-IMIX-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
 | | ... | 1 user and 15 ports (sessions) per user.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps.
 | | ...
-| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
-| | ... | 3-node-IPv4-SNAT-1u-15p
+| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
+| | ... | ${framesize} | ${traffic_profile}
+| | ... | AND | Show SNAT verbose | ${dut1}
+| | ... | AND | Show SNAT verbose | ${dut2}
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
 | | ...
-| | ${framesize}= | Set Variable | ${1518}
+| | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${100000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
@@ -211,25 +215,22 @@
 | | And Add SNAT to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When SNAT is initialized in a 3-node circular topology
-| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
-| | ... | ${perf_pdr_loss_acceptance_type}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
-| tc06-IMIX-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
+| tc06-IMIX-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
 | | ... | 1 user and 15 ports (sessions) per user.
-| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\
+| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps.
 | | ...
-| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
-| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p
-| | ... | AND | Show SNAT verbose | ${dut1}
-| | ... | AND | Show SNAT verbose | ${dut2}
+| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
+| | ... | ${traffic_profile}
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${100000}
@@ -243,6 +244,7 @@
 | | And Add SNAT to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When SNAT is initialized in a 3-node circular topology
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
\ No newline at end of file