| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M
| ...
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 1.8mpps.
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 1.8mpps.
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc02-1518B-1t1c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
| tc02-1518B-1t1c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc03-9000B-1t1c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
| tc03-9000B-1t1c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc04-78B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 4.0mpps.
| tc04-78B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 4.0mpps.
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc05-1518B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
| tc05-1518B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc06-9000B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
| tc06-9000B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc07-78B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 6.8mpps.
| tc07-78B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 6.8mpps.
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc08-1518B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
| tc08-1518B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| tc09-9000B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
| tc09-9000B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add heapsize config to all DUTs | 3G
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}