CSIT-678: Re-organize L2 libraries - performance

[csit.git] / tests / perf / 10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot

diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot
index 483fd8a..9a7b8dc 100644 (file)
--- a/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot
+++ b/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot
@@ -12,7 +12,7 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/performance_setup.robot
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M
@@ -22,8 +22,9 @@
 | Suite Teardown | Tear down 3-node performance topology
 | ...
 | Test Setup | Set up performance test
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps | ${framesize}
-| ... | ${traffic_profile}
+| ...
+| Test Teardown | Tear down performance discovery test | ${min_rate}pps
+| ... | ${framesize} | ${traffic_profile}
 | ...
 | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
 | ...
@@ -71,7 +72,6 @@
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -94,7 +94,6 @@
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -118,7 +117,6 @@
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -141,7 +139,6 @@
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -164,7 +161,6 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -186,7 +182,6 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -210,7 +205,6 @@
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -233,7 +227,6 @@
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -257,7 +250,6 @@
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -280,7 +272,6 @@
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -303,7 +294,6 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -325,7 +315,6 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -349,7 +338,6 @@
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -372,7 +360,6 @@
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -396,7 +383,6 @@
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -419,7 +405,6 @@
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -442,7 +427,6 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}
@@ -464,7 +448,6 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add heapsize config to all DUTs | 3G
 | | And Apply startup configuration on all VPP DUTs
 | | And Initialize IPv6 forwarding with scaling in 3-node circular topology
 | | ... | ${rts_per_flow}