CSIT-678: Re-organize L2 libraries - performance

[csit.git] / tests / perf / 10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot

diff --git a/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot
index ad13636..06c38df 100644 (file)
--- a/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot
+++ b/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot
@@ -12,20 +12,21 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/performance_setup.robot
 | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
 | ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
-| ... | ${traffic_profile}
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance discovery test | ${min_rate}pps
+| ... | ${framesize} | ${traffic_profile}
 | ...
 | Documentation | *RFC6830: Pkt throughput Lisp test cases*
 | ...
@@ -65,14 +66,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -95,14 +96,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -126,14 +127,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -156,14 +157,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -187,13 +188,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -216,13 +217,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -246,14 +247,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -276,14 +277,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -307,14 +308,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -337,14 +338,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -368,13 +369,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -397,13 +398,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -427,14 +428,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -457,14 +458,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -488,14 +489,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -518,14 +519,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -549,13 +550,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
@@ -578,13 +579,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
 | | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}