CSIT-387 collect HW stats if binary search fails

[csit.git] / tests / perf / Long_IPv4_Fib_200k_Intel-X520-DA2.robot

diff --git a/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
index 07634aa..670566d 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
@@ -19,7 +19,12 @@
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
 | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -38,7 +43,7 @@
 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
 | ... | (flow-group per direction, 100k flows per flow-group) with all packets
 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | generated payload. MAC addresses are matching MAC addresses of the TG
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
 | ... | is applied to both streams.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
@@ -52,7 +57,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -76,7 +81,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -102,7 +107,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
@@ -126,7 +131,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
@@ -152,7 +157,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
@@ -175,7 +180,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
@@ -200,7 +205,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -224,7 +229,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -348,7 +353,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -372,7 +377,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}