CSIT-387 collect HW stats if binary search fails

[csit.git] / tests / perf / Long_IPv4_iAcl_Intel-X520-DA2.robot

diff --git a/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
index acf6245..e75c316 100644 (file)
--- a/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
@@ -22,8 +22,13 @@
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-IPv4
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
+| ...           | AND | Show vpp trace dump on all DUTs
 | Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -43,7 +48,7 @@
 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | generated payload. MAC addresses are matching MAC addresses of the TG
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
 | ... | node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
@@ -54,7 +59,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -62,7 +67,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -91,7 +96,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -99,7 +104,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -130,7 +135,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
@@ -138,7 +143,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -167,7 +172,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
@@ -175,7 +180,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -206,7 +211,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
@@ -214,7 +219,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
@@ -242,7 +247,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
@@ -250,7 +255,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
@@ -280,7 +285,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -288,7 +293,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -317,7 +322,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -325,7 +330,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -364,7 +369,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -401,7 +406,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -440,7 +445,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
@@ -476,7 +481,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
@@ -506,7 +511,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -514,7 +519,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -543,7 +548,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
@@ -551,7 +556,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -590,7 +595,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -627,7 +632,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -666,7 +671,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
@@ -702,7 +707,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3