+++ /dev/null
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-# Parameters to be set on existing interface
-| ${vxlan_gpe_existing_if}= | ${interface}
-| &{vxlan_gpe_base_wrong_interface_settings}=
-| ... | name=${vxlan_gpe_existing_if}
-| ... | type=iana-if-type:ethernetCsmacd
-| ... | description=for testing purposes
-| ... | enabled=true
-| ... | link-up-down-trap-enable=enabled
-| &{vxlan_gpe_wrong_interface_settings}=
-| ... | local=192.168.50.77
-| ... | remote=192.168.50.72
-| ... | vni=${9}
-| ... | next-protocol=wrong_ipv4
-| ... | encap-vrf-id=${0}
-| ... | decap-vrf-id=${0}
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
-# Import additional VxLAN GPE settings from resource file
-| Variables | resources/test_data/honeycomb/vxlan_gpe.py
-| Documentation | *Honeycomb VxLAN-GPE management test suite.*
-| Force Tags | honeycomb_sanity
-
-*** Test Cases ***
-| Honeycomb creates VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb API can configure VxLAN GPE tunnel.
-| | ...
-| | Given interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | When Honeycomb creates VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-| | Then run keyword and continue on failure
-| | ... | VxLAN GPE configuration from Honeycomb should be
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE configuration from VAT should be
-| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${vxlan_gpe_if1}
-
-| Honeycomb removes VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb API can remove VxLAN GPE tunnel.
-| | ...
-# Disabled beacuse of bug in Honeycomb.
-# TODO: Enable when fixed.
-#| | Given VxLAN GPE configuration from Honeycomb should be
-#| | ... | ${node} | ${vxlan_gpe_if1}
-#| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-#| | And VxLAN GPE configuration from VAT should be
-#| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
-| | When Honeycomb removes VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | Then VxLAN GPE configuration from VAT should be empty
-| | ... | ${node}
-| | And VxLAN GPE configuration from Honeycomb should be
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_disabled_base_settings} | ${vxlan_gpe_settings}
-
-| Honeycomb sets wrong interface type while creating VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
-| | ... | with a wrong interface type set.
-| | ...
-| | Given interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | When Honeycomb fails to create VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | ... | ${vxlan_gpe_wrong_type_base_settings} | ${vxlan_gpe_settings}
-| | Then interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-
-| Honeycomb sets wrong protocol while creating VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
-| | ... | with a wrong next-protocol set.
-| | ...
-| | Given interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | When Honeycomb fails to create VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | ... | ${vxlan_gpe_wrong_protocol_base_settings}
-| | ... | ${vxlan_gpe_wrong_protocol_settings}
-| | Then interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-
-| Honeycomb sets VxLAN GPE tunnel on existing interface with wrong type
-| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
-| | ... | on existing interface with wrong type.
-| | ...
-| | Given VxLAN GPE configuration from VAT should be empty
-| | ... | ${node}
-| | When Honeycomb fails to create VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_existing_if}
-| | ... | ${vxlan_gpe_base_wrong_interface_settings}
-| | ... | ${vxlan_gpe_wrong_interface_settings}
-| | Then VxLAN GPE configuration from VAT should be empty
-| | ... | ${node}
-
-| Honeycomb creates VxLAN GPE tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure VxLAN GPE tunnel\
-| | ... | with IPv6 addresses.
-| | ...
-| | Given VxLAN GPE configuration from VAT should be empty
-| | ... | ${node}
-# Disabled beacuse of bug in Honeycomb
-# TODO: Enable when fixed.
-#| | And VxLAN GPE configuration from Honeycomb should be
-#| | ... | ${node} | ${vxlan_gpe_if5}
-#| | ... | ${vxlan_gpe_disabled_base_settings} | ${vxlan_gpe_settings}
-| | When Honeycomb creates VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if5}
-| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
-| | Then run keyword and continue on failure
-| | ... | VxLAN GPE configuration from Honeycomb should be
-| | ... | ${node} | ${vxlan_gpe_if5}
-| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE configuration from VAT should be
-| | ... | ${node} | ${vxlan_gpe_if5} | ${vxlan_gpe_ipv6_settings}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${vxlan_gpe_if5}
-
-| Honeycomb creates the second VxLAN GPE tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure another one VxLAN\
-| | ... | GPE tunnel with IPv6 addresses.
-| | ...
-| | Given interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | When Honeycomb creates VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
-| | Then run keyword and continue on failure
-| | ... | VxLAN GPE configuration from Honeycomb should be
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE configuration from VAT should be
-| | ... | ${node} | ${vxlan_gpe_if6} | ${vxlan_gpe_ipv6_settings2}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${vxlan_gpe_if6}
Code Review / csit.git / blobdiff