+++ /dev/null
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Variables | tests/suites/honeycomb/resources/sub_interfaces.py
-| Suite Teardown | Honeycomb removes all bridge domains | ${node}
-| Force Tags | honeycomb_sanity
-| Documentation | *Honeycomb sub-interface management test suite.*
-| ...
-| ... | This test suite tests if it is posible to create, modify and \
-| ... | delete a sub-interface.
-
-*** Variables ***
-| ${node}= | ${nodes['DUT1']}
-
-# Test interface 1 and its sub-interface parameters:
-| ${super_if}= | ${node['interfaces']['port1']['name']}
-| ${sub_if_id}= | ${sub_if_1_settings['identifier']}
-| ${sub_if_name}= | ${super_if}.${sub_if_id}
-
-*** Test Cases ***
-| Honycomb creates sub-interface
-| | [Documentation] | Check if Honeycomb creates a sub-interface.
-| | ...
-| | Given sub-interface configuration from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | And interface configuration from VAT should be empty
-| | ... | ${node} | ${sub_if_name}
-| | When Honeycomb creates sub-interface | ${node} | ${super_if}
-| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings}
-| | Then run keyword and continue on failure
-| | ... | Sub-interface configuration from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper}
-| | And run keyword and continue on failure
-| | ... | Sub-interface configuration from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper}
-| | And sub-interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-
-| Honeycomb sets interface and sub-interface up
-| | [Documentation] | Honeycomb changes the state of interface up and then \
-| | ... | changes the state of its sub-interface up, in this order.
-| | ...
-| | Given interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | down
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | down
-| | When Honeycomb sets interface state
-| | ... | ${node} | ${super_if} | up
-| | Then interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | up
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | up
-| | Given run keyword and continue on failure
-| | ... | Sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down
-| | And run keyword and continue on failure
-| | ... | Sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | down | down
-| | When Honeycomb sets the sub-interface up
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | Then run keyword and continue on failure
-| | ... | Sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | up | up
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | up | up
-
-| Honeycomb sets sub-interface down while its super-interface is up
-| | [Documentation] | Honeycomb sets the sub-interface down while its \
-| | ... | super-interface is up. It must be possible.
-| | ...
-| | [Teardown] | Set super and sub interfaces up
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | up | up
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | up | up
-| | And interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | up
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | up
-| | When Honeycomb sets the sub-interface down
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | Then sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | down | down
-| | And interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | up
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | up
-
-| Honeycomb sets interface and sub-interface down
-| | [Documentation] | Honeycomb changes the state of interface down and then \
-| | ... | changes the state of its sub-interface down, in this order.
-| | ...
-| | [Teardown] | Set super and sub interfaces down
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | up
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | up
-| | When Honeycomb sets interface state
-| | ... | ${node} | ${super_if} | down
-| | Then interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | down
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | down
-| | Given sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | up | down
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | up | down
-| | When Honeycomb sets the sub-interface down
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | Then sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | down | down
-
-| Honeycomb fails to set sub-interface up while its super-interface is down
-| | [Documentation] | Honeycomb tries to set the sub-interface up while its \
-| | ... | super-interface is down. It must not be possible.
-| | ...
-| | Given interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | down
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | down
-| | And sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | down | down
-| | When Honeycomb fails to set sub-interface up
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | Then interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | down
-| | And interface state from VAT should be
-| | ... | ${node} | ${super_if} | down
-| | And sub-interface state from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down
-| | And sub-interface state from VAT should be
-| | ... | ${node} | ${sub_if_name} | down | down
-
-| Honeycomb fails to delete sub-interface
-| | [Documentation] | Check if Honeycomb can delete an existing sub-interface.
-| | ...
-| | [Setup] | Set super and sub interfaces down
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given sub-interface configuration from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper}
-| | And sub-interface configuration from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper}
-| | When Honeycomb fails to remove all sub-interfaces
-| | ... | ${node} | ${super_if}
-| | Then sub-interface configuration from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper}
-| | And sub-interface configuration from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper}
-
-| Honeycomb adds sub-interface to new bridge domain
-| | [Documentation] | Check if Honeycomb adds a sub-interface to bridge domain.
-| | ...
-| | [Setup] | Set super and sub interfaces down
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given sub-interface configuration from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_if_1_oper}
-| | And sub-interface configuration from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper}
-| | When Honeycomb creates L2 bridge domain
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Then bridge domain configuration from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | When Honeycomb adds sub-interface to bridge domain
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_bd_settings}
-| | Then sub-interface bridge domain configuration from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${sub_bd_settings}
-| | And sub-interface bridge domain configuration from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${sub_bd_settings}
-| | And sub-interface configuration from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper}
-
-| Honeycomb enables tag-rewrite pop 1
-| | [Documentation] | Check if Honeycomb enables tag-rewrite and sets its \
-| | ... | parameters correctly. Case: pop 1.
-| | ...
-| | [Teardown] | Honeycomb disables tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT}
-
-| Honeycomb enables tag-rewrite push
-| | [Documentation] | Check if Honeycomb enables tag-rewrite and sets its \
-| | ... | parameters correctly. Case: push.
-| | ...
-| | [Teardown] | Honeycomb disables tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_push_VAT}
-
-| Honeycomb enables tag-rewrite translate 1-2
-| | [Documentation] | Check if Honeycomb enables tag-rewrite and sets its \
-| | ... | parameters correctly. Case: translate 1-2.
-| | ...
-| | [Teardown] | Honeycomb disables tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_translate_1_2}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ... | ${tag_rewrite_translate_1_2_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_translate_1_2_VAT}
-
-| Honeycomb disables tag-rewrite
-| | [Documentation] | Check if Honeycomb disables the tag-rewrite.
-| | ...
-| | [Teardown] | Honeycomb disables tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_disabled}
-| | Then rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_disabled_VAT}
-
-| Honeycomb enables tag-rewrite pop 1 again
-| | [Documentation] | Check if Honeycomb can enable tag-rewrite again, once it \
-| | ... | was disabled by Honeycomb.
-| | ...
-| | [Teardown] | Honeycomb disables tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT}
-
-| Honeycomb modifies the tag-rewrite
-| | [Documentation] | Honeycomb sets the tag-rewrite:
-| | ... | 1. pop 1, then
-| | ... | 2. push, then
-| | ... | 3. translate 1 - 2
-| | ... | Then Honeycomb disables the tag-rewrite.
-| | ...
-| | [Teardown] | Honeycomb disables tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Given rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_pop_1_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_push_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_push_VAT}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_translate_1_2}
-| | Then rewrite tag from Honeycomb should be
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ... | ${tag_rewrite_translate_1_2_oper}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_translate_1_2_VAT}
-| | When Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_disabled}
-| | Then rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_disabled_VAT}
-
-| Honeycomb fails to set wrong vlan-type in tag-rewrite
-| | [Documentation] | Check that Honeycomb does not accept wrong values of \
-| | ... | vlan-type in tag-rewrite.
-| | ...
-| | Given rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | When Honeycomb fails to set wrong rewrite tag
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | ... | ${tag_rewrite_translate_1_2_wrong}
-| | Then rewrite tag from Honeycomb should be empty
-| | ... | ${node} | ${super_if} | ${sub_if_id}
-| | And rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_disabled_VAT}
-
-*** Keywords ***
-| Set super and sub interfaces up
-| | [Documentation] | Honeycomb sets super-interface and sub-interface up, in \
-| | ... | this order.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super interface. Type: string
-| | ... | - identifier - Sub-interface identifier. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Set super and sub interfaces up\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | Honeycomb sets interface state
-| | ... | ${node} | ${super_interface} | up
-| | Honeycomb sets the sub-interface up
-| | ... | ${node} | ${super_interface} | ${identifier}
-
-| Set super and sub interfaces down
-| | [Documentation] | Honeycomb sets super-interface and sub-interface down, in\
-| | ... | this order.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super interface. Type: string
-| | ... | - identifier - Sub-interface identifier. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Set super and sub interfaces down\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | Honeycomb sets interface state
-| | ... | ${node} | ${super_interface} | down
-| | Honeycomb sets the sub-interface down
-| | ... | ${node} | ${super_interface} | ${identifier}
-
-| Honeycomb disables tag rewrite
-| | [Documentation] |
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb disables tag rewrite \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${sub_if_id}
-| | ...
-| | Honeycomb configures tag rewrite
-| | ... | ${node} | ${super_if} | ${sub_if_id} | ${tag_rewrite_disabled}
Code Review / csit.git / blobdiff