CSIT-219: Realocate resources for Honeycomb tests

[csit.git] / tests / suites / honeycomb / resources / l2_fib.py

diff --git a/tests/suites/honeycomb/resources/l2_fib.py b/tests/suites/honeycomb/resources/l2_fib.py
deleted file mode 100644 (file)
index b06193a..0000000
--- a/tests/suites/honeycomb/resources/l2_fib.py
+++ /dev/null
@@ -1,142 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Test variables for Honeycomb L2 FIB test suite."""
-
-# Bridge domain name.
-bd_name = 'test-l2-bd'
-bd_index = 1
-
-# Bridge domain settings used while creating a test bridge domain.
-bd_settings = {
-    'flood': True,
-    'forward': True,
-    'learn': True,
-    'unknown-unicast-flood': True,
-    'arp-termination': True
-}
-
-# Bridge domain configuration used while adding the bridge domain to an
-# interface.
-if_bd_settings = {
-    'bridge-domain': bd_name,
-    'split-horizon-group': 1,
-    'bridged-virtual-interface': False
-}
-
-# Add L2 FIB entry (forward).
-# Configuration data:
-l2_fib_forward_cfg = {
-    "phys-address": "aa:bb:cc:dd:ee:ff",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "action": "l2-fib-forward"
-}
-
-# Expected operational data:
-l2_fib_forward_oper = {
-    "phys-address": "aa:bb:cc:dd:ee:ff",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "bridged-virtual-interface": False,
-    "action": "v3po:l2-fib-forward",
-    "static-config": False
-}
-
-# Expected VAT data:
-l2_fib_forward_vat = {
-    "mac": int("".join(l2_fib_forward_oper["phys-address"].split(':')), 16),
-    "static_mac": 0,
-    "filter_mac": 0,
-    "bvi_mac": 0
-  }
-
-# Add L2 FIB entry (static, forward).
-# Configuration data:
-l2_fib_static_forward_cfg = {
-    "phys-address": "22:22:33:44:55:66",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "static-config": True,
-    "action": "l2-fib-forward"
-}
-
-# Expected operational data:
-l2_fib_static_forward_oper = {
-    "phys-address": "22:22:33:44:55:66",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "bridged-virtual-interface": False,
-    "action": "v3po:l2-fib-forward",
-    "static-config": True
-}
-
-# Expected VAT data:
-l2_fib_static_forward_vat = {
-    "mac": int("".join(l2_fib_static_forward_oper["phys-address"].
-                       split(':')), 16),
-    "sw_if_index": 5,
-    "static_mac": 1,
-    "filter_mac": 0,
-    "bvi_mac": 0
-}
-
-# Add L2 FIB entry (filter).
-# Configuration data:
-l2_fib_filter_cfg = {
-    "phys-address": "00:01:02:03:04:05",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "static-config": True,
-    "action": "l2-fib-filter"
-}
-
-# Expected operational data:
-l2_fib_filter_oper = {
-    "phys-address": "00:01:02:03:04:05",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "bridged-virtual-interface": False,
-    "action": "v3po:l2-fib-filter",
-    "static-config": True
-}
-
-# Expected VAT data:
-l2_fib_filter_vat = {
-    "mac": int("".join(l2_fib_filter_oper["phys-address"].split(':')), 16),
-    "sw_if_index": 5,
-    "static_mac": 1,
-    "filter_mac": 1,
-    "bvi_mac": 0
-}
-
-# WRONG configuration data - Add L2 FIB entry.
-l2_fib_forward_cfg_wrong_mac = {
-    "phys-address": "WRONG-MAC",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "action": "l2-fib-forward"
-}
-
-l2_fib_forward_cfg_wrong_if = {
-    "phys-address": "aa:bb:cc:dd:ee:ff",
-    "outgoing-interface": "WRONG-INTERFACE",
-    "action": "l2-fib-forward"
-}
-
-l2_fib_forward_cfg_wrong_action = {
-    "phys-address": "aa:bb:cc:dd:ee:ff",
-    "outgoing-interface": "GigabitEthernet0/8/0",
-    "action": "WRONG-ACTION"
-}
-
-# Modify L2 FIB entry (forward).
-# Configuration data:
-l2_fib_forward_modified_cfg = {
-    "phys-address": "aa:bb:cc:dd:ee:ff",
-    "outgoing-interface": "GigabitEthernet0/9/0",
-    "action": "l2-fib-forward"
-}