CSIT-220: Rename directories in tests directory
[csit.git] / tests / suites / iacl / l2_iacl_untagged.robot
diff --git a/tests/suites/iacl/l2_iacl_untagged.robot b/tests/suites/iacl/l2_iacl_untagged.robot
deleted file mode 100644 (file)
index 071ce1b..0000000
+++ /dev/null
@@ -1,150 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/counters.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| ...        | 3_NODE_DOUBLE_LINK_TOPO
-| Suite Setup | Run Keywords | Setup all TGs before traffic script
-| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes}
-| ...           | AND          | Vpp Show Errors | ${nodes['DUT1']}
-| ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *Ingress ACL test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
-| ... |        with one link between the nodes.
-| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
-| ... |        DUT1 is configured with iACL classification on link to TG,
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... |        in one direction by TG on link to DUT1 and received on TG link
-| ... |        to DUT2. On receive TG verifies if packets are dropped.
-
-*** Variables ***
-| ${l2_table}= | l2
-
-*** Test Cases ***
-| TC01: DUT with iACL MAC src-addr drops matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | src | ${tg_to_dut1_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send and receive ICMP Packet should fail
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC02: DUT with iACL MAC dst-addr drops matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add destination MAC address to classify
-| | ... |       table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | dst | ${tg_to_dut2_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send and receive ICMP Packet should fail
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC03: DUT with iACL MAC src-addr and dst-addr drops matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source and destination MAC address to classify
-| | ... |       table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
-| | ... | src | ${tg_to_dut1_mac}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
-| | ... | dst | ${tg_to_dut1_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2}
-| | Then Send and receive ICMP Packet should fail
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC04: DUT with iACL EtherType drops matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 000000000000000000000000ffff
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 0000000000000000000000000800
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send and receive ICMP Packet should fail
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}