| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes}
| ... | AND | Vpp Show Errors | ${nodes['DUT1']}
+| Documentation | *IPv6 routing with ingress ACL test cases*
+| ...
+| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6
+| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
+| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
+| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
+| ... | iACL classification and permit/deny action are configured on a per test
+| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
+| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
+| ... | verifies if packets are dropped, or if received verifies packet IPv6
+| ... | src-addr, dst-addr and MAC addresses.
*** Variables ***
| ${dut1_to_tg_ip}= | 3ffe:62::1
| ${l2_table}= | l2
*** Test Cases ***
-| VPP drops packets based on IPv6 source addresses
-| | [Documentation] | Create classify table on VPP, add source IP address
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC01: DUT with iACL IPv6 src-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source IPv6 address to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| VPP drops packets based on IPv6 destination addresses
-| | [Documentation] | Create classify table on VPP, add destination IP address
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC02: DUT with iACL IPv6 dst-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add destination IPv6 address to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| VPP drops packets based on IPv6 src-addr and dst-addr
-| | [Documentation] | Create classify table on VPP, add source and destination
-| | ... | IP address of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC03: DUT with iACL IPv6 src-addr and dst-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source and destination IPv6 addresses to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| VPP drops packets based on IPv6 protocol (TCP)
-| | [Documentation] | Create classify table on VPP, add mask for TCP port
-| | ... | into table and setup 'deny' traffic
-| | ... | and check if TCP traffic is dropped.
+| TC04: DUT with iACL IPv6 protocol set to TCP drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| VPP drops packets based on IPv6 protocol (UDP)
-| | [Documentation] | Create classify table on VPP, add mask for UDP port
-| | ... | into table and setup 'deny' traffic
-| | ... | and check if UDP traffic is dropped.
+| TC05: DUT with iACL IPv6 protocol set to UDP drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| VPP drops packets based on IPv6 TCP src ports
-| | [Documentation] | Create classify table on VPP, add source IP address
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC06: DUT with iACL IPv6 TCP src-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-| VPP drops packets based on IPv6 TCP dst ports
-| | [Documentation] | Create classify table on VPP, add destination TCP port
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC07: DUT with iACL IPv6 TCP dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-| VPP drops packets based on IPv6 TCP src + dst ports
-| | [Documentation] | Create classify table on VPP, add source and destination
-| | ... | TCP port of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC08: DUT with iACL IPv6 TCP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP source and destination ports to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| VPP drops packets based on IPv6 UDP src ports
-| | [Documentation] | Create classify table on VPP, add source UDP port
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC09: DUT with iACL IPv6 UDP src-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-| VPP drops packets based on IPv6 UDP dst ports
-| | [Documentation] | Create classify table on VPP, add destination UDP port
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC10: DUT with iACL IPv6 UDP dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-| VPP drops packets based on IPv6 UDP src + dst ports
-| | [Documentation] | Create classify table on VPP, add source and destination
-| | ... | UDP port of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC11: DUT with iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add UDP source and destination ports to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| VPP can drop packets based on src MAC + IPv6 UDP src+dst port
-| | [Documentation] | Create first classify table on VPP, for source MAC address
-| | ... | filtering and second classify table for IPv6 UDP source
-| | ... | and destination port filtering. Add MAC address and UDP
-| | ... | ports into table and set 'deny' traffic.
-| | ... | Check if traffic is dropped.
+| TC12: DUT with iACL MAC src-addr and iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source MAC address to classify (L2) table and add UDP\
+| | ... | source and destination ports to classify (hex) table with 'deny'.
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
Code Review / csit.git / blobdiff