-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/lisp/lisp_static_mapping.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPv4Util.IPv4Util
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_mapping/lisp_static_mapping.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| Test Setup | Run Keywords | Setup all DUTs before test
-| ... | AND | Setup all TGs before traffic script
-| ... | AND | Update All Interface Data On All Nodes | ${nodes}
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ... | AND | Show vpp trace dump on all DUTs
-| Documentation | *LISP static remote mapping test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel;
-| ... | Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for
-| ... | IPv6 routing over LISPoIPv6 tunnel; Eth-IPv6-LISP-IPv4-ICMPv4 on
-| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6
-| ... | tunnel; Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
-| ... | TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 (IPv6)
-| ... | routing and static routes. LISPoIPv4 (oIPv6) tunnel is configured
-| ... | between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
-| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv4 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv4 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_mapping} | ${dut2_ip4_static_mapping}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv6 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv6 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip6} | ${prefix6}
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip6} | ${prefix6}
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip6} | ${prefix6}
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6}
-| | ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_mapping} | ${dut2_ip6_static_mapping}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv6 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6}
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6}
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6}
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6}
-| | ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_mapping} | ${dut2_ip4o6_static_mapping}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv4 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4}
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4}
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4}
-| | ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_mapping} | ${dut2_ip6o4_static_mapping}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC05: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg1] On DUT1 and DUT2
-| | ... | configure IPv4 LISP remote static mappings. [Ver1] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Cfg2] Disable LISP. [Ver2] verify packets are not
-| | ... | received via LISP tunnel. [Cfg3] Re-enable LISP. [Ver3] verify
-| | ... | packets are received again via LISP tunnel. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_mapping} | ${dut2_ip4_static_mapping}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Disable Lisp | ${dut1_node}
-| | Then Send packet from Port to Port should failed
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet from Port to Port should failed
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Enable Lisp | ${dut1_node}
-| | Then Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
Code Review / csit.git / blobdiff