# limitations under the License.
*** Settings ***
-| Documentation | Test Lisp static remote mapping topology.
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/testing_path.robot
| Resource | resources/libraries/robot/ipv4.robot
| ... | AND | Setup all TGs before traffic script
| ... | AND | Update All Interface Data On All Nodes | ${nodes}
| Test Teardown | Show Packet Trace on All DUTs | ${nodes}
+| Documentation | *LISP static remote mapping test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,
+| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel;
+| ... | Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for
+| ... | IPv6 routing over LISPoIPv6 tunnel; Eth-IPv6-LISP-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6
+| ... | tunnel; Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
+| ... | TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 (IPv6)
+| ... | routing and static routes. LISPoIPv4 (oIPv6) tunnel is configured
+| ... | between DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
+| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr,
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Test Cases ***
-| VPP can pass IPv4 bidirectionally through LISP
-| | [Documentation] | Test IP4 Lisp remote static mapping.
-| | ... | Set IP4 lisp topology and check if packet passes through
-| | ... | Lisp topology.
+| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv4 tunnel
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure IPv4 LISP remote static mappings. [Ver] Make TG send
+| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
+| | ... | tunnel between them; verify IPv4 headers on received packets are
+| | ... | correct. [Ref] RFC6830.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| VPP can pass IPv6 bidirectionally through LISP
-| | [Documentation] | Test IP6 Lisp remote static mapping.
-| | ... | Set IP6 lisp topology and check if packet passes through
-| | ... | Lisp topology.
+| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv6 tunnel
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv6-ICMPv6 on \
+| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure IPv6 LISP remote static mappings. [Ver] Make TG send
+| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
+| | ... | tunnel between them; verify IPv4 headers on received packets are
+| | ... | correct. [Ref] RFC6830.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| VPP can pass IPv4 over IPv6 bidirectionally through LISP
-| | [Documentation] | Test IP4 over IP6 in Lisp remote static mapping.
-| | ... | Set IP6 topology and check if the IP4 packet
-| | ... | passes through IP6 Lisp topology.
+| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure IPv6 LISP remote static mappings. [Ver] Make TG send
+| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
+| | ... | tunnel between them; verify IPv4 headers on received packets are
+| | ... | correct. [Ref] RFC6830.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| VPP can pass IPv6 over IPv4 bidirectionally through LISP
-| | [Documentation] | Test IP6 over IP4 in Lisp remote static mapping.
-| | ... | Set IP4 topology and check if the IP6 packet
-| | ... | passes through IP4 Lisp topology.
+| TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on \
+| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure IPv4 LISP remote static mappings. [Ver] Make TG send
+| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
+| | ... | tunnel between them; verify IPv4 headers on received packets are
+| | ... | correct. [Ref] RFC6830.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| VPP can disable lisp and then re-enable it and everything should work
-| | [Documentation] | Test disable and enable Lisp.
-| | ... | Set Lisp and check if lisp work. Then disable Lisp
-| | ... | and check if it is disabled. At the end re-enable lisp
-| | ... | and check if Lisp is working.
+| TC05: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg1] On DUT1 and DUT2
+| | ... | configure IPv4 LISP remote static mappings. [Ver1] Make TG send
+| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
+| | ... | tunnel between them; verify IPv4 headers on received packets are
+| | ... | correct. [Cfg2] Disable LISP. [Ver2] verify packets are not
+| | ... | received via LISP tunnel. [Cfg3] Re-enable LISP. [Ver3] verify
+| | ... | packets are received again via LISP tunnel. [Ref] RFC6830.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
Code Review / csit.git / blobdiff