--- /dev/null
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Library | resources.libraries.python.NodePath
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG
+| ... | NIC_Intel-X520-DA2
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keyword | Show statistics on all DUTs
+| Documentation | *Throughput search suite (based on RFC2544).*
+| ...
+| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
+| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per
+| ... | direction). Packets contain Ethernet header, IPv4 header,
+| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
+| ... | matching MAC addresses of the TG node.
+
+*** Test Cases ***
+| Find NDR by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 64B frames by using
+| | ... | linear search starting at 4.1Mpps, stepping down with step of 0.1Mpps
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ${framesize}= | Set Variable | 64
+| | ${start_rate}= | Set Variable | 4100000
+| | ${step_rate}= | Set Variable | 100000
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | 14880952
+| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 1518B frames by using
+| | ... | linear search starting at 812,743pps, stepping down with step of
+| | ... | 10,000pps
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ${framesize}= | Set Variable | 1518
+| | ${start_rate}= | Set Variable | 812743
+| | ${step_rate}= | Set Variable | 10000
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | 812743
+| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 9000B frames by using
+| | ... | linear search starting at 138,580pps, stepping down with step of
+| | ... | 5,000pps
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ${framesize}= | Set Variable | 9000
+| | ${start_rate}= | Set Variable | 138580
+| | ${step_rate}= | Set Variable | 5000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | 138580
+| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using
+| | ... | linear search starting at 8.2Mpps, stepping down with step of 0.1Mpps
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 64
+| | ${start_rate}= | Set Variable | 8200000
+| | ${step_rate}= | Set Variable | 100000
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | 14880952
+| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
+| | ... | using linear search starting at 812,743pps, stepping down with step
+| | ... | of 10,000pps
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 1518
+| | ${start_rate}= | Set Variable | 812743
+| | ${step_rate}= | Set Variable | 10000
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | 812743
+| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
+| | ... | using linear search starting at 138,580pps, stepping down with step
+| | ... | of 5,000pps
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 9000
+| | ${start_rate}= | Set Variable | 138580
+| | ${step_rate}= | Set Variable | 5000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | 138580
+| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B
+| | ... | frames by using linear search starting at 9.8Mpps, stepping down
+| | ... | with step of 0.1Mpps
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 64
+| | ${start_rate}= | Set Variable | 9800000
+| | ${step_rate}= | Set Variable | 100000
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | 14880952
+| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B
+| | ... | frames by using linear search starting at 812,743pps, stepping down
+| | ... | with step of 10,000pps
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 1518
+| | ${start_rate}= | Set Variable | 812743
+| | ${step_rate}= | Set Variable | 10000
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | 812743
+| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B
+| | ... | frames by using linear search starting at 138,580pps, stepping
+| | ... | down with step of 5,000pps
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 9000
+| | ${start_rate}= | Set Variable | 138580
+| | ${step_rate}= | Set Variable | 5000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | 138580
+| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
Code Review / csit.git / blobdiff