# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Show statistics on all DUTs
+| Test Teardown | Run Keywords | Show statistics on all DUTs
+| ... | Remove startup configuration of VPP from all DUTs
| Documentation | *Throughput search suite (based on RFC2544).*
| ...
| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
| Find NDR by using RFC2544 linear search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput with non drop rate for 78B frames by using
-| | ... | linear search starting at 4.0Mpps, stepping down with step of 0.1Mpps
+| | ... | linear search starting at 5.0Mpps, stepping down with step of 0.1Mpps
| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
| | ${framesize}= | Set Variable | 78
-| | ${start_rate}= | Set Variable | 4000000
+| | ${start_rate}= | Set Variable | 5000000
| | ${step_rate}= | Set Variable | 100000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 14880952
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | ${max_rate}= | Set Variable | 12755102
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR by using RFC2544 linear search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ${step_rate}= | Set Variable | 10000
| | ${min_rate}= | Set Variable | 10000
| | ${max_rate}= | Set Variable | 812743
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ${step_rate}= | Set Variable | 5000
| | ${min_rate}= | Set Variable | 5000
| | ${max_rate}= | Set Variable | 138580
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using
-| | ... | linear search starting at 7.8Mpps, stepping down with step of 0.1Mpps
+| | ... | linear search starting at 9Mpps, stepping down with step of 0.1Mpps
| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
| | ${framesize}= | Set Variable | 78
-| | ${start_rate}= | Set Variable | 7800000
+| | ${start_rate}= | Set Variable | 9000000
| | ${step_rate}= | Set Variable | 100000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 14880952
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | ${max_rate}= | Set Variable | 12755102
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ${step_rate}= | Set Variable | 10000
| | ${min_rate}= | Set Variable | 10000
| | ${max_rate}= | Set Variable | 812743
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ${step_rate}= | Set Variable | 5000
| | ${min_rate}= | Set Variable | 5000
| | ${max_rate}= | Set Variable | 138580
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 78B
-| | ... | frames by using linear search starting at 9.8Mpps, stepping down with
+| | ... | frames by using linear search starting at 12.2Mpps, stepping down with
| | ... | step of 0.1Mpps
| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
| | ${framesize}= | Set Variable | 78
-| | ${start_rate}= | Set Variable | 9800000
+| | ${start_rate}= | Set Variable | 12200000
| | ${step_rate}= | Set Variable | 100000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 14880952
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | ${max_rate}= | Set Variable | 12755102
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ${step_rate}= | Set Variable | 10000
| | ${min_rate}= | Set Variable | 10000
| | ${max_rate}= | Set Variable | 812743
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | ${step_rate}= | Set Variable | 5000
| | ${min_rate}= | Set Variable | 5000
| | ${max_rate}= | Set Variable | 138580
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
-| | ... | ${step_rate} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
| Find NDR with 2 cores by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
| | ${framesize}= | Set Variable | 78
| | ${binary_min}= | Set Variable | 5000000
-| | ${binary_max}= | Set Variable | 9000000
+| | ${binary_max}= | Set Variable | 12000000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 14880952
+| | ${max_rate}= | Set Variable | 12755102
| | ${threshold}= | Set Variable | 5000
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
| | [Documentation]
| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
| | ${framesize}= | Set Variable | 78
| | ${binary_min}= | Set Variable | 6000000
-| | ${binary_max}= | Set Variable | 11000000
+| | ${binary_max}= | Set Variable | 12000000
| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | 14880952
+| | ${max_rate}= | Set Variable | 12755102
| | ${threshold}= | Set Variable | 5000
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv6
-| | ... | ${min_rate} | ${max_rate}
-| | ... | ${threshold}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
Code Review / csit.git / blobdiff