CSIT-215 Improve documentation - performance

[csit.git] / tests / suites / performance / Long_Xconnect_Dot1ad_Intel-X520-DA2.robot

diff --git a/tests/suites/performance/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
index 07b8468..09d9398 100644 (file)
--- a/tests/suites/performance/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
@@ -22,12 +22,12 @@
 | Test Setup | Setup all DUTs before test
 | Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
 | ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *RFC2544: Pkt throughput L2XC with dot1ad test cases*
+| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | Dot1ad tagging is applied on link between DUT1 and DUT2 with inner 4B
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect.
+| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B
 | ... | vlan tag (id=100) and outer 4B vlan tag (id=200).
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
 | ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
@@ -53,7 +53,7 @@
 | ${tag_rewrite}= | pop-2
 
 *** Test Cases ***
-| TC01: 64B NDR binary search - DUT L2XC with dot1ad - 1thread 1core 1rxq
+| TC01: 64B NDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
@@ -84,7 +84,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC02: 64B PDR binary search - DUT L2XC with dot1ad - 1thread 1core 1rxq
+| TC02: 64B PDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
@@ -117,7 +117,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC03: 1514B NDR binary search - DUT L2XC with dot1ad - 1thread 1core 1rxq
+| TC03: 1514B NDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
@@ -148,7 +148,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC04: 1514B PDR binary search - DUT L2XC with dot1ad - 1thread 1core 1rxq
+| TC04: 1514B PDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
@@ -181,7 +181,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC05: 9000B NDR binary search - DUT L2XC with dot1ad - 1thread 1core 1rxq
+| TC05: 9000B NDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
@@ -211,7 +211,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC06: 9000B PDR binary search - DUT L2XC with dot1ad - 1thread 1core 1rxq
+| TC06: 9000B PDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
@@ -243,7 +243,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC07: 64B NDR binary search - DUT L2XC with dot1ad - 2threads 2cores 1rxq
+| TC07: 64B NDR binary search - DUT L2XC with 802.1ad - 2threads 2cores 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
@@ -274,7 +274,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC08: 64B PDR binary search - DUT L2XC with dot1ad - 2threads 2cores 1rxq
+| TC08: 64B PDR binary search - DUT L2XC with 802.1ad - 2threads 2cores 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
@@ -307,7 +307,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC09: 1514B NDR binary search - DUT L2XC with dot1ad - 2threads 2cores 1rxq
+| TC09: 1514B NDR binary search - DUT L2XC with 802.1ad - 2threads 2cores 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
@@ -338,7 +338,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC10: 1514B PDR binary search - DUT L2XC with dot1ad - 2threads 2cores 1rxq
+| TC10: 1514B PDR binary search - DUT L2XC with 802.1ad - 2threads 2cores 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
@@ -371,7 +371,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC11: 9000B NDR binary search - DUT L2XC with dot1ad - 2threads 2cores 1rxq
+| TC11: 9000B NDR binary search - DUT L2XC with 802.1ad - 2threads 2cores 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
@@ -401,7 +401,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC12: 9000B PDR binary search - DUT L2XC with dot1ad - 2threads 2cores 1rxq
+| TC12: 9000B PDR binary search - DUT L2XC with 802.1ad - 2threads 2cores 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
@@ -433,7 +433,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC13: 64B NDR binary search - DUT L2XC with dot1ad - 4threads 4cores 2rxq
+| TC13: 64B NDR binary search - DUT L2XC with 802.1ad - 4threads 4cores 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
@@ -464,7 +464,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC14: 64B PDR binary search - DUT L2XC with dot1ad - 4threads 4cores 2rxq
+| TC14: 64B PDR binary search - DUT L2XC with 802.1ad - 4threads 4cores 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
@@ -497,7 +497,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC15: 1514B NDR binary search - DUT L2XC with dot1ad - 4threads 4cores 2rxq
+| TC15: 1514B NDR binary search - DUT L2XC with 802.1ad - 4threads 4cores 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1514 Byte frames
@@ -528,7 +528,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC16: 1514B PDR binary search - DUT L2XC with dot1ad - 4threads 4cores 2rxq
+| TC16: 1514B PDR binary search - DUT L2XC with 802.1ad - 4threads 4cores 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1514 Byte frames
@@ -561,7 +561,7 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-| TC17: 9000B NDR binary search - DUT L2XC with dot1ad - 4threads 4cores 2rxq
+| TC17: 9000B NDR binary search - DUT L2XC with 802.1ad - 4threads 4cores 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
@@ -591,7 +591,7 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC18: 9000B PDR binary search - DUT L2XC with dot1ad - 4threads 4cores 2rxq
+| TC18: 9000B PDR binary search - DUT L2XC with 802.1ad - 4threads 4cores 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames