CSIT-215 Improve documentation - performance

[csit.git] / tests / suites / performance / Short_Xconnect_Dot1q_Intel-X520-DA2.robot

diff --git a/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
index 1057a70..b2eb1ad 100644 (file)
--- a/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
@@ -22,11 +22,11 @@
 | Test Setup | Setup all DUTs before test
 | Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
 | ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *Reference NDR throughput L2XC verify test cases*
+| Documentation | *Reference NDR throughput L2XC with 802.1q verify test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. Dot1q
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
 | ... | tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
 | ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
@@ -34,11 +34,12 @@
 | ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
 | ... | loss tolerance. Ref-NDR value is periodically updated acording to
 | ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
-| ... | performance tests for the same DUT confiiguration. Test packets are
+| ... | performance tests for the same DUT configuration. Test packets are
 | ... | generated by TG on links to DUTs. TG traffic profile contains two L3
 | ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
 | ... | all packets containing Ethernet header, IPv4 header with IP protocol=61
-| ... | and generated payload.
+| ... | and generated payload. MAC addresses are matching MAC addresses of the
+| ... | TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
@@ -46,7 +47,7 @@
 | ${tag_rewrite}= | pop-1
 
 *** Test Cases ***
-| TC01: Verify 64B ref-NDR at 2x 2.9Mpps - DUT dot1q - 1thread 1core 1rxq
+| TC01: Verify 64B ref-NDR at 2x 2.9Mpps - DUT 802.1q - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
@@ -71,7 +72,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC02: Verify 1518B ref-NDR at 2x 720kpps - DUT dot1q - 1thread 1core 1rxq
+| TC02: Verify 1518B ref-NDR at 2x 720kpps - DUT 802.1q - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
@@ -96,7 +97,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC03: Verify 9000B ref-NDR at 2x 120kpps - DUT dot1q - 1thread 1core 1rxq
+| TC03: Verify 9000B ref-NDR at 2x 120kpps - DUT 802.1q - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
@@ -120,7 +121,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC04: Verify 64B ref-NDR at 2x 7Mpps - DUT dot1q - 2thread 2core 1rxq
+| TC04: Verify 64B ref-NDR at 2x 7Mpps - DUT 802.1q - 2thread 2core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
@@ -145,7 +146,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC05: Verify 1518B ref-NDR at 2x 720kpps - DUT dot1q - 2thread 2core 1rxq
+| TC05: Verify 1518B ref-NDR at 2x 720kpps - DUT 802.1q - 2thread 2core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
@@ -170,7 +171,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC06: Verify 9000B ref-NDR at 2x 120kpps - DUT dot1q - 2thread 2core 1rxq
+| TC06: Verify 9000B ref-NDR at 2x 120kpps - DUT 802.1q - 2thread 2core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
@@ -194,7 +195,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC07: Verify 64B ref-NDR at 2x 11Mpps - DUT dot1q - 4thread 4core 2rxq
+| TC07: Verify 64B ref-NDR at 2x 11Mpps - DUT 802.1q - 4thread 4core 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 64 Byte
@@ -219,7 +220,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC08: Verify 1518B ref-NDR at 2x 720kpps - DUT dot1q - 4thread 4core 2rxq
+| TC08: Verify 1518B ref-NDR at 2x 720kpps - DUT 802.1q - 4thread 4core 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte
@@ -244,7 +245,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC09: Verify 9000B ref-NDR at 2x 120kpps - DUT dot1q - 4thread 4core 2rxq
+| TC09: Verify 9000B ref-NDR at 2x 120kpps - DUT 802.1q - 4thread 4core 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte