+++ /dev/null
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/vxlan.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
-| Test Setup | Run Keywords | Setup all DUTs before test
-| ... | AND | Setup all TGs before traffic script
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ... | AND | Show vpp trace dump on all DUTs
-| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN test cases*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes; TG=DUT1=DUT2=TG 3-node circular
-| ... | topology with double parallel links.
-| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
-| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4;
-| ... | Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
-| ... | TG-DUTn for L2 switching of IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning
-| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN
-| ... | tunnels are configured between L2BDs on DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
-| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
-
-*** Variables ***
-| ${vni_1}= | 23
-| ${vni_2}= | 35
-
-| ${bd_id1}= | 10
-| ${bd_id2}= | 20
-| ${bd_id3}= | 30
-| ${shg1}= | 1
-| ${shg2}= | 2
-
-| ${ip4_addr1}= | 172.16.0.1
-| ${ip4_addr2}= | 172.16.0.2
-| ${ip4_prefix}= | 24
-
-| ${ip6_addr1}= | 3ffe:64::1
-| ${ip6_addr2}= | 3ffe:64::2
-| ${ip6_prefix}= | 64
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG
-| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in
-| | ... | both directions and are correct on receive. [Ref] RFC7348.
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2}
-| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1}
-| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE}
-| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
-| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1}
-| | ... | ${dut1_to_tg} | ${dut1s_vxlan}
-| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
-| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1}
-| | ... | ${dut2_to_tg} | ${dut2s_vxlan}
-| | Then Send and receive ICMPv4 bidirectionally
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
-| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
-| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
-| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be
-| | ... | switched by DUT1 and DUT2; verify packets are not switched between
-| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
-| | ... | [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
-| | ... | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']}
-| | And Interfaces in 3-node BD-SHG testing are up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1}
-| | ... | ${ip4_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2}
-| | ... | ${ip4_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ... | ${bd_id1} | ${shg1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ... | ${bd_id1} | ${shg1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ... | ${bd_id2}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ... | ${bd_id3}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send and receive ICMPv4 bidirectionally
-| | | ... | ${tg_node} | ${tg_to_dut2_if1}
-| | | ... | ${tg_to_dut2_if2}
-
-| TC03: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
-| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
-| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces
-| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
-| | ... | all TG interfaces. [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
-| | ... | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']}
-| | And Interfaces in 3-node BD-SHG testing are up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1}
-| | ... | ${ip4_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2}
-| | ... | ${ip4_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ... | ${ip4_addr1} | ${ip4_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ... | ${ip4_addr2} | ${ip4_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ... | ${bd_id1} | ${shg1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ... | ${bd_id1} | ${shg2}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ... | ${bd_id2}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ... | ${bd_id3}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut2_if1}
-| | ... | ${tg_to_dut2_if2}
-
-| TC04: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure L2 bridge-domain (MAC learning enabled), each with one
-| | ... | interface to TG and one VXLAN tunnel interface towards the other
-| | ... | DUT. [Ver] Make TG send ICMPv6 Echo Req between two of its
-| | ... | interfaces to be switched by DUT1 and DUT2; verify all packets
-| | ... | are received. [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
-| | ... | ${ip6_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
-| | ... | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip6_addr1} | ${ip6_addr2}
-| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1}
-| | ... | ${dut1_to_tg} | ${dut1s_vxlan}
-| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip6_addr2} | ${ip6_addr1}
-| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1}
-| | ... | ${dut2_to_tg} | ${dut2s_vxlan}
-| | Then Send and receive ICMPv6 bidirectionally
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC05: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
-| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
-| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
-| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be
-| | ... | switched by DUT1 and DUT2; verify packets are not switched between
-| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
-| | ... | [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
-| | ... | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']}
-| | And Interfaces in 3-node BD-SHG testing are up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
-| | ... | ${ip6_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
-| | ... | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ... | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip6_addr2} | ${ip6_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ... | ${ip6_addr2} | ${ip6_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ... | ${bd_id1} | ${shg1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ... | ${bd_id1} | ${shg1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ... | ${bd_id2}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ... | ${bd_id3}
-| | Then Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send and receive ICMPv6 bidirectionally
-| | | ... | ${tg_node} | ${tg_to_dut2_if1}
-| | | ... | ${tg_to_dut2_if2}
-
-| TC06: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
-| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
-| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces
-| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
-| | ... | all TG interfaces. [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
-| | ... | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']}
-| | And Interfaces in 3-node BD-SHG testing are up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
-| | ... | ${ip6_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
-| | ... | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ... | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ... | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ... | ${ip6_addr2} | ${ip6_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ... | ${ip6_addr2} | ${ip6_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ... | ${bd_id1} | ${shg1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ... | ${bd_id1} | ${shg2}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ... | ${bd_id2}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${bd_id3}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ... | ${bd_id3}
-| | Then Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
-| | ... | ${tg_to_dut2_if1}
-| | ... | ${tg_to_dut2_if2}
Code Review / csit.git / blobdiff